diff --git a/boards/nucleo-f413zh/doc.md b/boards/nucleo-f413zh/doc.md
new file mode 100644
index 0000000000..7f88668cdb
--- /dev/null
+++ b/boards/nucleo-f413zh/doc.md
@@ -0,0 +1,48 @@
+@defgroup    boards_nucleo-f413zh STM32 Nucleo-F413ZH
+@ingroup     boards_common_nucleo144
+@brief       Support for the STM32 Nucleo-F413ZH
+
+## Overview
+
+The Nucleo-F413ZH is a board from ST's Nucleo family supporting ARM Cortex-M4
+STM32F413ZH microcontroller with 320KiB of RAM and 1.5MiB of Flash.
+
+## Pinout
+
+@image html pinouts/nucleo-f412zg-and-f413zh.svg "Pinout for the nucleo-f413zh (from STM user manual, UM1974, http://www.st.com/resource/en/user_manual/dm00244518.pdf, page 34)" width=50%
+
+### MCU
+
+| MCU        |    STM32F413ZH      |
+|:---------- |:------------------- |
+| Family     | ARM Cortex-M4       |
+| Vendor     | ST Microelectronics |
+| RAM        | 320KiB              |
+| Flash      | 1.5MiB              |
+| Frequency  | up to 100MHz        |
+| FPU        | yes                 |
+| Timers     | 18 (12x 16-bit, 2x 32, 1x RTC, 1x Systick, 2x Watchdog) |
+| ADC        | 1x 12-bit (16 channels) |
+| UARTs      | 6 (four USARTs and two UARTs) |
+| SPIs       | 5                   |
+| CANs       | 3                   |
+| RTC        | 1                   |
+| I2Cs       | 4                   |
+| Vcc        | 1.7V - 3.6V         |
+| Datasheet  | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f413zh.pdf) |
+| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0430-stm32f413423-advanced-armbased-32bit-mcus-stmicroelectronics.pdf) |
+| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/pm0214-stm32-cortexm4-mcus-and-mpus-programming-manual-stmicroelectronics.pdf) |
+| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518-stm32-nucleo-144-boards-stmicroelectronics.pdf) |
+
+## Flashing the Board Using ST-LINK Removable Media
+
+On-board ST-LINK programmer provides via composite USB device removable media.
+Copying the HEX file causes reprogramming of the board. This task
+could be performed manually; however, the cpy2remed (copy to removable
+media) PROGRAMMER script does this automatically. To program board in
+this manner, use the command:
+```
+make BOARD=nucleo-f413zh PROGRAMMER=cpy2remed flash
+```
+@note This PROGRAMMER requires ST-LINK firmware 2.37.26 or newer. Firmware updates
+could be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
\ No newline at end of file
diff --git a/boards/nucleo-f413zh/doc.txt b/boards/nucleo-f413zh/doc.txt
deleted file mode 100644
index 1b28a2fad5..0000000000
--- a/boards/nucleo-f413zh/doc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-/**
- @defgroup    boards_nucleo-f413zh STM32 Nucleo-F413ZH
- @ingroup     boards_common_nucleo144
- @brief       Support for the STM32 Nucleo-F413ZH
-
-## Overview
-
-The Nucleo-F413ZH is a board from ST's Nucleo family supporting ARM Cortex-M4
-STM32F413ZH microcontroller with 256KiB of RAM and 1MiB of Flash.
-
-## Pinout
-
-@image html pinouts/nucleo-f412zg-and-f413zh.svg "Pinout for the nucleo-f413zh (from STM user manual, UM1974, http://www.st.com/resource/en/user_manual/dm00244518.pdf, page 34)" width=50%
-
-## Flashing the Board Using ST-LINK Removable Media
-
-On-board ST-LINK programmer provides via composite USB device removable media.
-Copying the HEX file causes reprogramming of the board. This task
-could be performed manually; however, the cpy2remed (copy to removable
-media) PROGRAMMER script does this automatically. To program board in
-this manner, use the command:
-```
-make BOARD=nucleo-f413zh PROGRAMMER=cpy2remed flash
-```
-@note This PROGRAMMER requires ST-LINK firmware 2.37.26 or newer. Firmware updates
-could be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
-
- */