diff --git a/sys/usb/usbus/cdc/acm/cdc_acm.c b/sys/usb/usbus/cdc/acm/cdc_acm.c
index 6ea9140db9..9fadb34e80 100644
--- a/sys/usb/usbus/cdc/acm/cdc_acm.c
+++ b/sys/usb/usbus/cdc/acm/cdc_acm.c
@@ -29,6 +29,8 @@
 #include "usb/usbus/cdc/acm.h"
 #include "usb/usbus/control.h"
 
+#include "usb_board_reset_internal.h"
+
 #define ENABLE_DEBUG 0
 #include "debug.h"
 
@@ -259,7 +261,7 @@ static int _control_handler(usbus_t *usbus, usbus_handler_t *handler,
     usbus_cdcacm_device_t *cdcacm = (usbus_cdcacm_device_t*)handler;
     switch (setup->request) {
         case USB_CDC_MGNT_REQUEST_SET_LINE_CODING:
-            if (!(cdcacm->coding_cb)) {
+            if (!(cdcacm->coding_cb) && !IS_USED(MODULE_USB_BOARD_RESET)) {
                 /* Line coding not supported, return STALL */
                 DEBUG("CDCACM: line coding not supported\n");
                 return -1;
@@ -279,6 +281,12 @@ static int _control_handler(usbus_t *usbus, usbus_handler_t *handler,
                           sizeof(usb_req_cdcacm_coding_t), len);
                     return -1;
                 }
+                if (IS_USED(MODULE_USB_BOARD_RESET)) {
+                    /* call board reset function first if reset is received */
+                    usb_board_reset_coding_cb(cdcacm, coding->baud,
+                                              coding->databits, coding->parity,
+                                              coding->format);
+                }
                 if (cdcacm->coding_cb) {
                     DEBUG("Setting line coding to baud rate %" PRIu32 ", "
                           "%u data bits, parity value %u, stop bit value %u\n",
diff --git a/sys/usb/usbus/cdc/acm/cdc_acm_stdio.c b/sys/usb/usbus/cdc/acm/cdc_acm_stdio.c
index a145b03412..5a106ad685 100644
--- a/sys/usb/usbus/cdc/acm/cdc_acm_stdio.c
+++ b/sys/usb/usbus/cdc/acm/cdc_acm_stdio.c
@@ -34,10 +34,6 @@
 #include "vfs.h"
 #endif
 
-#ifdef MODULE_USB_BOARD_RESET
-#include "usb_board_reset_internal.h"
-#endif
-
 static usbus_cdcacm_device_t cdcacm;
 static uint8_t _cdc_tx_buf_mem[CONFIG_USBUS_CDC_ACM_STDIO_BUF_SIZE];
 static uint8_t _cdc_rx_buf_mem[CONFIG_USBUS_CDC_ACM_STDIO_BUF_SIZE];
@@ -91,7 +87,4 @@ void usb_cdc_acm_stdio_init(usbus_t *usbus)
 {
     usbus_cdc_acm_init(usbus, &cdcacm, _cdc_acm_rx_pipe, NULL,
                        _cdc_tx_buf_mem, sizeof(_cdc_tx_buf_mem));
-#ifdef MODULE_USB_BOARD_RESET
-    usbus_cdc_acm_set_coding_cb(&cdcacm, usb_board_reset_coding_cb);
-#endif
 }
diff --git a/sys/usb_board_reset/usb_board_reset.c b/sys/usb_board_reset/usb_board_reset.c
index 8d39f5cb30..81657befb6 100644
--- a/sys/usb_board_reset/usb_board_reset.c
+++ b/sys/usb_board_reset/usb_board_reset.c
@@ -47,11 +47,11 @@ int usb_board_reset_coding_cb(usbus_cdcacm_device_t *cdcacm,
     (void)stop;
     switch (baud) {
         case RESET_IN_BOOTLOADER_TRIGGER_BAUDRATE:
-            LOG_DEBUG("[cdc-acm-stdio] reset in bootloader");
+            LOG_DEBUG("[cdc-acm] reset in bootloader\n");
             usb_board_reset_in_bootloader();
             break;
         case RESET_IN_APPLICATION_TRIGGER_BAUDRATE:
-            LOG_DEBUG("[cdc-acm-stdio] reset in application");
+            LOG_DEBUG("[cdc-acm] reset in application\n");
             usb_board_reset_in_application();
             break;
         default: