kaspar/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-12-15 09:33:50 +01:00
Code Releases Activity

Merge pull request #21794 from crasbe/pr/guides_stm32_flash_openocd

Browse Source 
doc/guides: Extend STM32 Flashing Guide with OpenOCD and WSL Remark
This commit is contained in:
crasbe 2025-10-15 11:13:52 +00:00 committed by GitHub
commit 744d3c0f7f
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 37 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
doc/guides/board_specific/stm32.md
View File

@ -3,6 +3,15 @@ title: STM32 Flashing
description: Guide on how to flash STM32 boards description: Guide on how to flash STM32 boards
--- ---
## General
The Nucleos often ship with very old ST-Link Firmware.
If the flash operation fails for some reason, it is possible that
the embedded ST-Link firmware is either too old or has bugs that have been
fixed in the meantime. You can find updates for the ST-Link on
[this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
You can also use the `STM32CubeProgrammer` software to update the firmware.
## Flashing the Board Using OpenOCD ## Flashing the Board Using OpenOCD
The ST Nucleo32, 64 and 144 boards include an on-board ST-LINK programmer The ST Nucleo32, 64 and 144 boards include an on-board ST-LINK programmer
@ -24,8 +33,36 @@ select it by explicitly setting the `PROGRAMMER` variable:
make BOARD=xxxxx PROGARMMER=openocd flash make BOARD=xxxxx PROGARMMER=openocd flash
``` ```
:::note
The OpenOCD release cycle is quite slow and newly released chips might not be
supported by the latest release. For example the STM32C0 series is not yet
supported by OpenOCD 0.12.0, resulting in the following error message:
`Warn : Cannot identify target as an STM32G0/G4/L4/L4+/L5/U5/WB/WL family device.`.
Furthermore, some distributions ship even older versions, which might not have
support for new devices or for the ST-Link V3 that is built-in on new
generation Nucleos, resulting in a diffuse LibUSB error message such as this:
`Error: libusb_open() failed with LIBUSB_ERROR_ACCESS`.
If you have a recent OpenOCD version, you can check if your user is
in the `dialout` and/or `plugdev` group and therefore has the appropriate
access rights.
In either of the first two cases you have to compile the latest OpenOCD
sources for your system and manually update the
`/etc/udev/rules.d/60-openocd.rules` file with the
file provided in the `contrib` subfolder of the OpenOCD repository.
Please refer to the OpenOCD documentation for further information.
:::
## Flashing the Board Using the ST-LINK Mass Storage Device ## Flashing the Board Using the ST-LINK Mass Storage Device
:::note
This method does not (easily) work with WSL, as the standard kernel provided
does not support Mass Storage Devices. While you can access the MSD through
e.g. `/mnt/d/` if the ST-Link is mounted under Windows, you can not use the
VCP (Virtual COM Port) via `usbipd` inside of WSL at the same time.
:::
The on-board ST-Link programmer found on all Nucleo32, 64 and 144 boards The on-board ST-Link programmer found on all Nucleo32, 64 and 144 boards
will show up as a mass storage device when plugged in via USB. will show up as a mass storage device when plugged in via USB.
Copying a HEX file to the mass storage device will trigger the flashing Copying a HEX file to the mass storage device will trigger the flashing
@ -37,13 +74,6 @@ you can use the following command:
make BOARD=nucleo-xxxx PROGRAMMER=cpy2remed flash make BOARD=nucleo-xxxx PROGRAMMER=cpy2remed flash
``` ```
:::note
If the flash operation fails for some reason, it is possible that
the embedded ST-Link firmware is either too old or has bugs that have been
fixed in the meantime. You can find updates for the ST-Link on
[this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
:::
## Flashing the Board using stm32flash ## Flashing the Board using stm32flash
It is possible to automatically boot the STM32 board into the in-ROM bootloader It is possible to automatically boot the STM32 board into the in-ROM bootloader