mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-12-21 12:33:49 +01:00
boards/gd32vf103c-start: new board
This adds support for the GD32VF103C-START, the official "starter board" for the GD32VF103C MCU by the MCU vendor.
This commit is contained in:
Marian Buschsieweke
parent
9fbb23b167
commit
7f27e6cc7f
3
boards/gd32vf103c-start/Makefile
Normal file
3
boards/gd32vf103c-start/Makefile
Normal file
@ -0,0 +1,3 @@
|
|||||||
|
MODULE = board
|
||||||
|
|
||||||
|
include $(RIOTBASE)/Makefile.base
|
||||||
5
boards/gd32vf103c-start/Makefile.dep
Normal file
5
boards/gd32vf103c-start/Makefile.dep
Normal file
@ -0,0 +1,5 @@
|
|||||||
|
ifneq (,$(filter saul_default,$(USEMODULE)))
|
||||||
|
USEMODULE += saul_gpio
|
||||||
|
endif
|
||||||
|
|
||||||
|
include $(RIOTBOARD)/common/gd32v/Makefile.dep
|
||||||
24
boards/gd32vf103c-start/Makefile.features
Normal file
24
boards/gd32vf103c-start/Makefile.features
Normal file
@ -0,0 +1,24 @@
|
|||||||
|
CPU_MODEL = gd32vf103cbt6
|
||||||
|
|
||||||
|
# Put defined MCU peripherals here (in alphabetical order)
|
||||||
|
FEATURES_PROVIDED += periph_adc
|
||||||
|
FEATURES_PROVIDED += periph_i2c
|
||||||
|
FEATURES_PROVIDED += periph_pwm
|
||||||
|
FEATURES_PROVIDED += periph_spi
|
||||||
|
FEATURES_PROVIDED += periph_timer
|
||||||
|
FEATURES_PROVIDED += periph_uart
|
||||||
|
FEATURES_PROVIDED += periph_usbdev
|
||||||
|
FEATURES_PROVIDED += sdcard_spi
|
||||||
|
|
||||||
|
# Other features provided by the board (in alphabetical order)
|
||||||
|
FEATURES_PROVIDED += arduino_analog
|
||||||
|
FEATURES_PROVIDED += arduino_i2c
|
||||||
|
FEATURES_PROVIDED += arduino_pins
|
||||||
|
FEATURES_PROVIDED += arduino_pwm
|
||||||
|
FEATURES_PROVIDED += arduino_shield_uno
|
||||||
|
FEATURES_PROVIDED += arduino_spi
|
||||||
|
FEATURES_PROVIDED += arduino_uart
|
||||||
|
FEATURES_PROVIDED += highlevel_stdio
|
||||||
|
FEATURES_PROVIDED += tinyusb_device
|
||||||
|
|
||||||
|
include $(RIOTBOARD)/common/gd32v/Makefile.features
|
||||||
10
boards/gd32vf103c-start/Makefile.include
Normal file
10
boards/gd32vf103c-start/Makefile.include
Normal file
@ -0,0 +1,10 @@
|
|||||||
|
PORT_LINUX ?= /dev/ttyACM0
|
||||||
|
PROGRAMMER ?= openocd
|
||||||
|
OPENOCD_DEBUG_ADAPTER ?= dap
|
||||||
|
OPENOCD_TRANSPORT := default
|
||||||
|
|
||||||
|
# Only consider TTYs matching the following filter when auto-selecting the TTY
|
||||||
|
# with `MOST_RECENT_PORT=1`.
|
||||||
|
TTY_BOARD_FILTER := --driver 'ch341' --model 'USB2.0-Serial'
|
||||||
|
|
||||||
|
include $(RIOTBOARD)/common/gd32v/Makefile.include
|
||||||
2
boards/gd32vf103c-start/dist/openocd.cfg
vendored
Normal file
2
boards/gd32vf103c-start/dist/openocd.cfg
vendored
Normal file
@ -0,0 +1,2 @@
|
|||||||
|
adapter speed 10000
|
||||||
|
source [find target/gd32vf103.cfg]
|
||||||
103
boards/gd32vf103c-start/doc.txt
Normal file
103
boards/gd32vf103c-start/doc.txt
Normal file
@ -0,0 +1,103 @@
|
|||||||
|
/**
|
||||||
|
@defgroup boards_gd32vf103c_start GD32VF103C-START
|
||||||
|
@ingroup boards
|
||||||
|
@brief Support for the GD32VF103C-START board
|
||||||
|
@author Marian Buschsieweke
|
||||||
|
|
||||||
|
## Overview
|
||||||
|
|
||||||
|
The GD32VF103C-START development board is an official starter kit by GigaDevice
|
||||||
|
for the GD32VF103CBT6 MCU, despite the lack of official documentation. It
|
||||||
|
featrures:
|
||||||
|
|
||||||
|
- GD32VF103CBT6 RISC-V MCU @108MHz
|
||||||
|
- On-Board GD-Link Programmer/Debugger (middle mini-USB connector)
|
||||||
|
- USB-OTG (left mini-USB connector)
|
||||||
|
- Integrated USB to UART bridge (right mini-USB connector)
|
||||||
|
- 1 user LED
|
||||||
|
- 1 user Button
|
||||||
|
- 1 reset button
|
||||||
|
- Arduino UNO compatible pin headers (except ISP header)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
@warning The analog pins are labeled A1 - A6 rather than A0 - A5, as would
|
||||||
|
be the correct Arduino naming. The Arduino pin mapping uses the
|
||||||
|
correct Arduino naming, so that apps written for other boards
|
||||||
|
expecting Arduino UNO compatible shields remain compatible.
|
||||||
|
|
||||||
|
## Hardware
|
||||||
|
|
||||||
|
| MCU | GD32VF103CBT6 | Supported |
|
||||||
|
|:----------------- |:----------------------------------------- | --------- |
|
||||||
|
| Family | RISC-V with ECLIC | |
|
||||||
|
| Vendor | GigaDevice | |
|
||||||
|
| RAM | 32 KiB | |
|
||||||
|
| Flash | 128 KiB | |
|
||||||
|
| Frequency | 108 MHz | |
|
||||||
|
| Power Modes | 3 (Sleep, Deep Sleep, Standby) | yes |
|
||||||
|
| GPIOs | 37 | yes |
|
||||||
|
| Timers | 5 x 16-bit timer | yes |
|
||||||
|
| RTC | 1 x 32-bit counter, 20-bit prescaler | yes |
|
||||||
|
| WDT | 2 x 12-bit counter, 3-bit prescaler | yes |
|
||||||
|
| ADC | 2 x 12-bit units, 16 channels @ 1 Msps | yes |
|
||||||
|
| DAC | 2 x 12-bit channel | yes |
|
||||||
|
| UART | - | yes |
|
||||||
|
| USART | 3 | yes |
|
||||||
|
| SPI | 3 | yes |
|
||||||
|
| I2C | 2 x Fast Mode 400 kHz | yes |
|
||||||
|
| I2S | 2 | no |
|
||||||
|
| CAN | 2 x CAN 2.0B with up to 1 Mbps | no |
|
||||||
|
| PWM | 6 Channels | yes |
|
||||||
|
| USB | 1 x USB FS OTG (+ GD-Link + UART bridge) | yes |
|
||||||
|
| Vcc | 3.0V - 3.6V | |
|
||||||
|
| Datasheet | [Datasheet][gd32vf103c-datasheet] | |
|
||||||
|
| User Manual | [User Manual][gd32vf103c-manual] | |
|
||||||
|
| Board Manual | [Board Manual][gd32vf103c-board-manual] | |
|
||||||
|
|
||||||
|
[gd32vf103c-datasheet]: https://web.archive.org/web/20240117072854/https://gd32mcu.com/data/documents/datasheet/GD32VF103_Datasheet_Rev1.6.pdf
|
||||||
|
[gd32vf103c-manual]: https://web.archive.org/web/20240117073025/https://gd32mcu.com/data/documents/userManual/GD32VF103_User_Manual_Rev1.5.pdf
|
||||||
|
[gd32vf103c-board-manual]: https://web.archive.org/web/20240117072723/https://en.maritex.com.pl/product/attachment/154626/6f28fdabafb9dff852537ced7bc0aa71
|
||||||
|
|
||||||
|
## Flashing
|
||||||
|
|
||||||
|
@warning Flashing seems to fail with some Arduino UNO compatible boards
|
||||||
|
attached. Remove them and try again.
|
||||||
|
|
||||||
|
By default, flashing is done via OpenOCD using the GD-Link programmer/debugger
|
||||||
|
using:
|
||||||
|
|
||||||
|
```
|
||||||
|
make BOARD=gd32vf103c-start -C path/to/app flash
|
||||||
|
```
|
||||||
|
|
||||||
|
It is also possible to flash via DFU-Util:
|
||||||
|
|
||||||
|
1. Connect a mini USB cable to the USB connector labeled OTG.
|
||||||
|
2. Power the board (e.g. by connecting a second mini USB cable to the GD-Link
|
||||||
|
programmer/debugger, even though we won't use it)
|
||||||
|
3. Enter the DFU bootloader by placing the jumper on JP4 (below BOOT) in
|
||||||
|
position H. Press the reset button afterwards.
|
||||||
|
4. Run `make BOARD=gd32vf103c-start PROGRAMMER=dfu-util -C path/to/app flash`
|
||||||
|
5. Restore the JP4 jumper to position L. Afterwards press the reset button
|
||||||
|
again
|
||||||
|
|
||||||
|
## Connecting to the Serial Output
|
||||||
|
|
||||||
|
By default RIOT's uses UART for `stdio`. To access that, connect a mini USB
|
||||||
|
cable to the connector labeled "USART". In addition a jumper needs to be
|
||||||
|
placed on JP2 in the "Usart" position; otherwise RIOT's TXD is not connected
|
||||||
|
to the RXD of the integrated USB UART bridge. Afterwards just run:
|
||||||
|
|
||||||
|
```
|
||||||
|
make BOARD=gd32vf103c-start -C path/to/app term
|
||||||
|
```
|
||||||
|
|
||||||
|
Alternatively, `stdio_cdc_acm` can be used. In this case the mini USB cable
|
||||||
|
needs to be connected to the USB connector labeled OTG.
|
||||||
|
|
||||||
|
@note It is safe to keep the jumper at JP2 in "Usart" position or even
|
||||||
|
remove the jumper with RIOT. PA9 is still used as UART/TXD and VBUS
|
||||||
|
sensing is disabled anyway.
|
||||||
|
|
||||||
|
*/
|
||||||
150
boards/gd32vf103c-start/include/arduino_iomap.h
Normal file
150
boards/gd32vf103c-start/include/arduino_iomap.h
Normal file
@ -0,0 +1,150 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2024 Marian Buschsieweke
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
* General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
* directory for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @ingroup boards_gd32vf103c_start
|
||||||
|
* @{
|
||||||
|
*
|
||||||
|
* @file
|
||||||
|
* @brief Mapping from MCU pins to Arduino pins
|
||||||
|
*
|
||||||
|
* You can use the defines in this file for simplified interaction with the
|
||||||
|
* Arduino specific pin numbers.
|
||||||
|
*
|
||||||
|
* @author Marian Buschsieweke <marian.buschsieweke@posteo.net>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef ARDUINO_IOMAP_H
|
||||||
|
#define ARDUINO_IOMAP_H
|
||||||
|
|
||||||
|
#include "macros/units.h"
|
||||||
|
#include "periph/adc.h"
|
||||||
|
#include "periph/gpio.h"
|
||||||
|
#include "periph/pwm.h"
|
||||||
|
#include "periph_conf.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Arduino's UART devices
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define ARDUINO_UART_D0D1 UART_DEV(0)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Arduino's SPI buses
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/**
|
||||||
|
* @brief SPI_DEV(0) is connected to D11/D12/D13
|
||||||
|
*/
|
||||||
|
#define ARDUINO_SPI_D11D12D13 SPI_DEV(0)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Arduino's I2C buses
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/**
|
||||||
|
* @brief The first I2C bus is where shields for the Arduino UNO expect it
|
||||||
|
*/
|
||||||
|
#define ARDUINO_I2C_UNO I2C_DEV(0)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Mapping of MCU pins to Arduino pins
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define ARDUINO_PIN_0 GPIO_PIN(PORT_A, 10)
|
||||||
|
#define ARDUINO_PIN_1 GPIO_PIN(PORT_A, 9)
|
||||||
|
#define ARDUINO_PIN_2 GPIO_PIN(PORT_B, 4)
|
||||||
|
#define ARDUINO_PIN_3 GPIO_PIN(PORT_B, 5)
|
||||||
|
#define ARDUINO_PIN_4 GPIO_PIN(PORT_B, 6)
|
||||||
|
#define ARDUINO_PIN_5 GPIO_PIN(PORT_B, 7)
|
||||||
|
#define ARDUINO_PIN_6 GPIO_PIN(PORT_B, 8)
|
||||||
|
#define ARDUINO_PIN_7 GPIO_PIN(PORT_B, 9)
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_8 GPIO_PIN(PORT_B, 1)
|
||||||
|
#define ARDUINO_PIN_9 GPIO_PIN(PORT_B, 0)
|
||||||
|
#define ARDUINO_PIN_10 GPIO_PIN(PORT_B, 12)
|
||||||
|
#define ARDUINO_PIN_11 GPIO_PIN(PORT_B, 15)
|
||||||
|
#define ARDUINO_PIN_12 GPIO_PIN(PORT_B, 14)
|
||||||
|
#define ARDUINO_PIN_13 GPIO_PIN(PORT_B, 13)
|
||||||
|
#define ARDUINO_PIN_14 GPIO_PIN(PORT_B, 11)
|
||||||
|
#define ARDUINO_PIN_15 GPIO_PIN(PORT_B, 10)
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_16 GPIO_PIN(PORT_A, 1)
|
||||||
|
#define ARDUINO_PIN_17 GPIO_PIN(PORT_A, 2)
|
||||||
|
#define ARDUINO_PIN_18 GPIO_PIN(PORT_A, 3)
|
||||||
|
#define ARDUINO_PIN_19 GPIO_PIN(PORT_B, 4)
|
||||||
|
#define ARDUINO_PIN_20 GPIO_PIN(PORT_C, 5)
|
||||||
|
#define ARDUINO_PIN_21 GPIO_PIN(PORT_C, 6)
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_LAST 21
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Aliases for analog pins
|
||||||
|
* @warning Silkscreen label is A1 - A6 instead of A0 - A5. We stick with
|
||||||
|
* Arduino UNO labeling here so that e.g. board independent drivers
|
||||||
|
* for shields can be provided.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define ARDUINO_PIN_A0 ARDUINO_PIN_16
|
||||||
|
#define ARDUINO_PIN_A1 ARDUINO_PIN_17
|
||||||
|
#define ARDUINO_PIN_A2 ARDUINO_PIN_18
|
||||||
|
#define ARDUINO_PIN_A3 ARDUINO_PIN_19
|
||||||
|
#define ARDUINO_PIN_A4 ARDUINO_PIN_20
|
||||||
|
#define ARDUINO_PIN_A5 ARDUINO_PIN_21
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Mapping of Arduino analog pins to RIOT ADC lines
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define ARDUINO_A0 ADC_LINE(0)
|
||||||
|
#define ARDUINO_A1 ADC_LINE(1)
|
||||||
|
#define ARDUINO_A2 ADC_LINE(2)
|
||||||
|
#define ARDUINO_A3 ADC_LINE(3)
|
||||||
|
#define ARDUINO_A4 ADC_LINE(4)
|
||||||
|
#define ARDUINO_A5 ADC_LINE(5)
|
||||||
|
|
||||||
|
#define ARDUINO_ANALOG_PIN_LAST 5
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Mapping of Arduino pins to RIOT PWM dev and channel pairs
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/**
|
||||||
|
* @brief PWM frequency
|
||||||
|
*/
|
||||||
|
#define ARDUINO_PWM_FREQU KHZ(100)
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_3_PWM_DEV PWM_DEV(0)
|
||||||
|
#define ARDUINO_PIN_3_PWM_CHAN 0
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_5_PWM_DEV PWM_DEV(1)
|
||||||
|
#define ARDUINO_PIN_5_PWM_CHAN 0
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_6_PWM_DEV PWM_DEV(1)
|
||||||
|
#define ARDUINO_PIN_6_PWM_CHAN 1
|
||||||
|
|
||||||
|
#define ARDUINO_PIN_9_PWM_DEV PWM_DEV(0)
|
||||||
|
#define ARDUINO_PIN_9_PWM_CHAN 1
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* ARDUINO_IOMAP_H */
|
||||||
|
/** @} */
|
||||||
53
boards/gd32vf103c-start/include/board.h
Normal file
53
boards/gd32vf103c-start/include/board.h
Normal file
@ -0,0 +1,53 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2024 Marian Buschsieweke
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
* General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
* directory for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @ingroup boards_gd32vf103c_start
|
||||||
|
* @{
|
||||||
|
*
|
||||||
|
* @file
|
||||||
|
* @brief Board specific definitions for the GD32VF103C-START board
|
||||||
|
*
|
||||||
|
* @author Marian Buschsieweke <marian.buschsieweke@posteo.net>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H
|
||||||
|
#define BOARD_H
|
||||||
|
|
||||||
|
#include "board_common.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Button pin definitions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define BTN0_PIN GPIO_PIN(PORT_A, 0)
|
||||||
|
#define BTN0_MODE GPIO_IN_PU
|
||||||
|
#define BTN0_INT_FLANK GPIO_FALLING
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name LED (on-board) configuration
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define LED0_PIN GPIO_PIN(PORT_A, 7)
|
||||||
|
#define LED0_MASK (1 << 7)
|
||||||
|
#define LED0_ON (GPIOA->BC = LED0_MASK)
|
||||||
|
#define LED0_OFF (GPIOA->BOP = LED0_MASK)
|
||||||
|
#define LED0_TOGGLE (GPIOA->OCTL ^= LED0_MASK)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H */
|
||||||
|
/** @} */
|
||||||
52
boards/gd32vf103c-start/include/gpio_params.h
Normal file
52
boards/gd32vf103c-start/include/gpio_params.h
Normal file
@ -0,0 +1,52 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2024 Marian Buschsieweke
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
* General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
* directory for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @ingroup boards_gd32vf103c_start
|
||||||
|
* @{
|
||||||
|
*
|
||||||
|
* @file
|
||||||
|
* @brief Configuration of SAUL mapped GPIO pins
|
||||||
|
*
|
||||||
|
* @author Marian Buschsieweke <marian.buschsieweke@posteo.net>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef GPIO_PARAMS_H
|
||||||
|
#define GPIO_PARAMS_H
|
||||||
|
|
||||||
|
#include "board.h"
|
||||||
|
#include "saul/periph.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief LED/Button SAUL configuration
|
||||||
|
*/
|
||||||
|
static const saul_gpio_params_t saul_gpio_params[] =
|
||||||
|
{
|
||||||
|
{
|
||||||
|
.name = "Wakeup",
|
||||||
|
.pin = BTN0_PIN,
|
||||||
|
.mode = BTN0_MODE,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "LED0",
|
||||||
|
.pin = LED0_PIN,
|
||||||
|
.mode = GPIO_OUT,
|
||||||
|
.flags = SAUL_GPIO_INIT_CLEAR,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* GPIO_PARAMS_H */
|
||||||
|
/** @} */
|
||||||
174
boards/gd32vf103c-start/include/periph_conf.h
Normal file
174
boards/gd32vf103c-start/include/periph_conf.h
Normal file
@ -0,0 +1,174 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2023 Gunar Schorcht <gunar@schorcht.net>
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
* General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
* directory for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @ingroup boards_gd32vf103c_start
|
||||||
|
* @{
|
||||||
|
*
|
||||||
|
* @file
|
||||||
|
* @brief Board specific definitions for the GD32VF103C-START board
|
||||||
|
*
|
||||||
|
* @author Marian Buschsieweke <marian.buschsieweke@posteo.net>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef PERIPH_CONF_H
|
||||||
|
#define PERIPH_CONF_H
|
||||||
|
|
||||||
|
#include "macros/units.h"
|
||||||
|
|
||||||
|
#ifndef CONFIG_BOARD_HAS_HXTAL
|
||||||
|
#define CONFIG_BOARD_HAS_HXTAL 1 /**< The board provides a high frequency oscillator. */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_BOARD_HAS_LXTAL
|
||||||
|
#define CONFIG_BOARD_HAS_LXTAL 1 /**< The board provides a low frequency oscillator. */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_CLOCK_HXTAL
|
||||||
|
#define CONFIG_CLOCK_HXTAL MHZ(8) /**< HXTAL frequency */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef I2C_DEV_1_USED
|
||||||
|
#define I2C_DEV_1_USED 1 /**< Enable I2C_DEV(1) by default */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include "periph_cpu.h"
|
||||||
|
#include "periph_common_conf.h"
|
||||||
|
|
||||||
|
#include "cfg_spi_default.h"
|
||||||
|
#include "cfg_uart_default.h"
|
||||||
|
#include "cfg_usbdev_default.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name I2C configuration
|
||||||
|
*
|
||||||
|
* @note This board may require external pullup resistors for i2c operation.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief PB10/PB11 (D15/D14) as I2C for Arduino UNO compatibility
|
||||||
|
*
|
||||||
|
* PB10/PB11 are located where Arduino UNO shields expect I2C.
|
||||||
|
*/
|
||||||
|
static const i2c_conf_t i2c_config[] = {
|
||||||
|
{
|
||||||
|
.dev = I2C1,
|
||||||
|
.speed = I2C_SPEED_NORMAL,
|
||||||
|
.scl_pin = GPIO_PIN(PORT_B, 10),
|
||||||
|
.sda_pin = GPIO_PIN(PORT_B, 11),
|
||||||
|
.rcu_mask = RCU_APB1EN_I2C1EN_Msk,
|
||||||
|
.irqn = I2C1_EV_IRQn,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
#define I2C_NUMOF ARRAY_SIZE(i2c_config)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name ADC configuration
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
static const adc_conf_t adc_config[] = {
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 1), .dev = 0, .chan = 1 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 2), .dev = 0, .chan = 2 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 3), .dev = 0, .chan = 3 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 4), .dev = 0, .chan = 4 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 5), .dev = 0, .chan = 5 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_A, 6), .dev = 0, .chan = 6 },
|
||||||
|
/* ADC Temperature channel */
|
||||||
|
{ .pin = GPIO_UNDEF, .dev = 0, .chan = 16 },
|
||||||
|
/* ADC VREF channel */
|
||||||
|
{ .pin = GPIO_UNDEF, .dev = 0, .chan = 17 },
|
||||||
|
};
|
||||||
|
|
||||||
|
#define ADC_NUMOF ARRAY_SIZE(adc_config)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Timer configuration
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
static const timer_conf_t timer_config[] = {
|
||||||
|
{
|
||||||
|
.dev = TIMER0,
|
||||||
|
.max = 0x0000ffff,
|
||||||
|
.rcu_mask = RCU_APB2EN_TIMER0EN_Msk,
|
||||||
|
.bus = APB2,
|
||||||
|
.irqn = TIMER0_Channel_IRQn
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.dev = TIMER1,
|
||||||
|
.max = 0x0000ffff,
|
||||||
|
.rcu_mask = RCU_APB1EN_TIMER1EN_Msk,
|
||||||
|
.bus = APB1,
|
||||||
|
.irqn = TIMER1_IRQn
|
||||||
|
},
|
||||||
|
/* TIMER2 and TIMER3 are used for PWM pins */
|
||||||
|
{
|
||||||
|
.dev = TIMER4,
|
||||||
|
.max = 0x0000ffff,
|
||||||
|
.rcu_mask = RCU_APB1EN_TIMER4EN_Msk,
|
||||||
|
.bus = APB1,
|
||||||
|
.irqn = TIMER4_IRQn
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
#define TIMER_0_IRQN TIMER0_Channel_IRQn
|
||||||
|
#define TIMER_1_IRQN TIMER1_IRQn
|
||||||
|
#define TIMER_2_IRQN TIMER4_IRQn
|
||||||
|
|
||||||
|
#define TIMER_NUMOF ARRAY_SIZE(timer_config)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name PWM configuration
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
static const pwm_conf_t pwm_config[] = {
|
||||||
|
{
|
||||||
|
.dev = TIMER2,
|
||||||
|
.rcu_mask = RCU_APB1EN_TIMER2EN_Msk,
|
||||||
|
.chan = {
|
||||||
|
{ .pin = GPIO_PIN(PORT_B, 5), .cc_chan = 1 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_B, 0), .cc_chan = 2 },
|
||||||
|
/* unused channels have to be defined by GPIO_UNDEF */
|
||||||
|
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
|
||||||
|
{ .pin = GPIO_UNDEF, .cc_chan = 3 },
|
||||||
|
},
|
||||||
|
.af = GPIO_AF_OUT_PP,
|
||||||
|
.bus = APB1,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.dev = TIMER3,
|
||||||
|
.rcu_mask = RCU_APB1EN_TIMER3EN_Msk,
|
||||||
|
.chan = {
|
||||||
|
{ .pin = GPIO_PIN(PORT_B, 7), .cc_chan = 1 },
|
||||||
|
{ .pin = GPIO_PIN(PORT_B, 8), .cc_chan = 2 },
|
||||||
|
/* unused channels have to be defined by GPIO_UNDEF */
|
||||||
|
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
|
||||||
|
{ .pin = GPIO_UNDEF, .cc_chan = 3 },
|
||||||
|
},
|
||||||
|
.af = GPIO_AF_OUT_PP,
|
||||||
|
.bus = APB1,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
|
||||||
|
/** @} */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* PERIPH_CONF_H */
|
||||||
|
/** @} */
|
||||||
Loading…
x
Reference in New Issue
Block a user