diff --git a/cpu/k60/include/cpu_conf.h b/cpu/k60/include/cpu_conf.h
index 2f45720cb6..8c92986641 100644
--- a/cpu/k60/include/cpu_conf.h
+++ b/cpu/k60/include/cpu_conf.h
@@ -33,10 +33,6 @@ extern "C"
 #if defined(CPU_MODEL_MK60DN512VLL10) || defined(CPU_MODEL_MK60DN256VLL10)
 #include "vendor/MK60D10.h"
 
-/** The expected CPUID value, can be used to implement a check that we are
- * running on the right hardware */
-#define K60_EXPECTED_CPUID 0x410fc241u
-
 /* K60 rev 2.x replaced the RNG module in 1.x by the RNGA PRNG module */
 #define KINETIS_RNGA            (RNG)
 #else
@@ -81,91 +77,6 @@ extern "C"
 #define PIT_CLKEN()    (bit_set32(&SIM->SCGC6, SIM_SCGC6_PIT_SHIFT)) /**< Enable PIT clock gate */
 /** @} */
 
-/**
- * @name Power mode hardware details
- */
-/** @{ */
-#define KINETIS_PMCTRL SMC->PMCTRL
-#define KINETIS_PMCTRL_SET_MODE(x) (KINETIS_PMCTRL = SMC_PMCTRL_STOPM(x) | SMC_PMCTRL_LPWUI_MASK)
-/* Clear LLS protection, clear VLPS, VLPW, VLPR protection */
-/* Note: This register can only be written once after each reset, so we must
- * enable all power modes that we wish to use. */
-#define KINETIS_PMPROT_UNLOCK() (SMC->PMPROT |= SMC_PMPROT_ALLS_MASK | SMC_PMPROT_AVLP_MASK)
-
-/**
- * @name STOP mode bitfield values
- * @{
- */
-/** @brief Normal STOP */
-#define KINETIS_POWER_MODE_NORMAL (0b000)
-/** @brief VLPS STOP */
-#define KINETIS_POWER_MODE_VLPS   (0b010)
-/** @brief LLS STOP */
-#define KINETIS_POWER_MODE_LLS    (0b011)
-/** @} */
-
-/**
- * @brief Wake up source number for the LPTMR0
- *
- * In order to let the hwtimer wake the CPU from low power modes, we need to
- * enable this wake up source.
- */
-#define KINETIS_LLWU_WAKEUP_MODULE_LPTMR 0
-
-/**
- * @brief IRQn name to enable LLWU IRQ in NVIC
- */
-#define KINETIS_LLWU_IRQ LLW_IRQn
-
-/**
- * @brief Enable clock gate on LLWU module.
- */
-#define LLWU_UNLOCK() (BITBAND_REG32(SIM->SCGC4, SIM_SCGC4_LLWU_SHIFT) = 1)
-
-/**
- * @brief Internal modules whose interrupts are mapped to LLWU wake up sources.
- *
- * Other modules CAN NOT be used to wake the CPU from LLS or VLLSx power modes.
- */
-typedef enum llwu_wakeup_module {
-    KINETIS_LPM_WAKEUP_MODULE_LPTMR = 0,
-    KINETIS_LPM_WAKEUP_MODULE_CMP0 = 1,
-    KINETIS_LPM_WAKEUP_MODULE_CMP1 = 2,
-    KINETIS_LPM_WAKEUP_MODULE_CMP2 = 3,
-    KINETIS_LPM_WAKEUP_MODULE_TSI = 4,
-    KINETIS_LPM_WAKEUP_MODULE_RTC_ALARM = 5,
-    KINETIS_LPM_WAKEUP_MODULE_RESERVED = 6,
-    KINETIS_LPM_WAKEUP_MODULE_RTC_SECONDS = 7,
-    KINETIS_LPM_WAKEUP_MODULE_END,
-} llwu_wakeup_module_t;
-
-/**
- * @brief enum that maps physical pins to wakeup pin numbers in LLWU module
- *
- * Other pins CAN NOT be used to wake the CPU from LLS or VLLSx power modes.
- */
-typedef enum llwu_wakeup_pin {
-    KINETIS_LPM_WAKEUP_PIN_PTE1 = 0,
-    KINETIS_LPM_WAKEUP_PIN_PTE2 = 1,
-    KINETIS_LPM_WAKEUP_PIN_PTE4 = 2,
-    KINETIS_LPM_WAKEUP_PIN_PTA4 = 3,
-    KINETIS_LPM_WAKEUP_PIN_PTA13 = 4,
-    KINETIS_LPM_WAKEUP_PIN_PTB0 = 5,
-    KINETIS_LPM_WAKEUP_PIN_PTC1 = 6,
-    KINETIS_LPM_WAKEUP_PIN_PTC3 = 7,
-    KINETIS_LPM_WAKEUP_PIN_PTC4 = 8,
-    KINETIS_LPM_WAKEUP_PIN_PTC5 = 9,
-    KINETIS_LPM_WAKEUP_PIN_PTC6 = 10,
-    KINETIS_LPM_WAKEUP_PIN_PTC11 = 11,
-    KINETIS_LPM_WAKEUP_PIN_PTD0 = 12,
-    KINETIS_LPM_WAKEUP_PIN_PTD2 = 13,
-    KINETIS_LPM_WAKEUP_PIN_PTD4 = 14,
-    KINETIS_LPM_WAKEUP_PIN_PTD6 = 15,
-    KINETIS_LPM_WAKEUP_PIN_END
-} llwu_wakeup_pin_t;
-
-/** @} */
-
 #ifdef __cplusplus
 }
 #endif