- Rename all `arduino_pinmap.h` to `arduino_iomap.h`
- An empty `arduino_pinmap.h` that just includes `arduino_iomap.h`
is provided for backward compatibility
- Move all info from `arduino_board.h` into the new file as trivial
macros, so that they can also be used outside of sketches
- The new name reflects the fact not just pin mappings, but also
other I/O features such as PWMs are mapped
- Drop all `arduino_board.h`
- `arduino_board.h` and `arduino_iomap.h` now provide the exact
same information, just in a different format
- a generic `arduino_board.h` is provided instead that just
uses the info in `arduinio_iomap.h` and provides them in the
format the code in `sys/arduino` expects it
- Add fine grained features to indicate for mappings
- availability of mappings for analog pins, DAC pins, PWM pins,
UART devices, SPI/I2C buses to the corresponding RIOT
identification can now be expressed:
- `arduino_pins`: `ARDUINO_PIN_0` etc. are available
- `arduino_analog`: `ARDUINO_A0` etc. are available
- `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available
- `arduino_dac`: `ARDUINO_DAC0` etc. are available
- `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available
- `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available
- `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available
- mechanical/electrical compatibility with specific form factors
can now be expressed as features:
- `aruino_shield_nano`: Arduino NANO compatible headers
- `aruino_shield_uno`: Arduino UNO compatible headers
- `aruino_shield_mega`: Arduino MEGA compatible headers
- `aruino_shield_isp`: ISP header is available
This provides the groundwork to implement shield support as modules
that can rely on the I/O mappings, rather than having to provide a
configuration per board.
19556: tools/mspdebug: fix `make debug` and `make debugserver` r=aabadie a=maribu
### Contribution description
The semantics of `make debug` and `make debugserver` have changed in the years since the MSP430 integration. This brings the implementation back into line with the current semantics
- `make debug` now starts both mspdebug and GDB, no need to run `make debugserver` prior to `make debug` anymore
- `make debug` no longer flashes the target to not waste flash erase cycles
- GDB mutliarch support is added
- support for selecting a debug adapter by its serial is added
19662: driver/lc709203f: remove unnecessary use of float r=aabadie a=kfessel
### Contribution description
removes a unnecessary use of float
### Testing procedure
read and test if you got that hardware (I don't)
### Issues/PRs references
#19614
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
The semantics of `make debug` and `make debugserver` have changed in
the years since the MSP430 integration. This brings the implementation
back into line with the current semantics
- `make debug` now starts both mspdebug and GDB, no need to
run `make debugserver` prior to `make debug` anymore
- `make debug` no longer flashes the target to not waste flash erase
cycles
- GDB mutliarch support is added
- support for selecting a debug adapter by its serial is added
- Replace all users of `$(RIOTBASE)/build` with the already present
`$(BUILD_DIR)` variable
- Replace all users of `$(BUILD_DIR)/pkg` with the already present
`$(PKGDIRBASE)` variable
- Create a `CACHEDIR.TAG` file in the `$(BUILD_DIR)`
19588: doc: Remove ANSI r=benpicco a=bergzand
### Contribution description
> We moved to C11. And before that, we were at C99.
(When can we add Rust to this list?)
### Testing procedure
Check the docs
### Issues/PRs references
None
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Doxygen fails to render inline code in headers correctly in the
version the CI uses. So, work around the issue by not typestetting
`stm32flash` as inline code but as regular text.
Boards with an integrated debugger/programmer that also provides the
serial as UART <--> USB adapter, the TTY serial matches the serial of
the programmer.
This adapts the `serial.inc.mk` to set the `DEBUG_ADAPTER_ID` to the
TTY serial if (and only if) `MOST_RECENT_PORT` *and*
`DEBUG_ADAPTER_ID_IS_TTY_SERIAL` both have a value of `1`. Boards with
an integrated programmer are expected to set
`DEBUG_ADAPTER_ID_IS_TTY_SERIAL` to `1` in their `Makefile.include`.
Allow overriding the shell command used to auto-detect the TTY of a
board with `MOST_RECENT_PORT=1` via the `TTY_SELECT_CMD` variable.
The use case is to also detect Arduino Mega 2560 clones with cheap
USB UART bridges (for which the filter command may yield false
positives) while preferring genuine Arduino Mega 2560 boards (if
found) over the clones (as the filter for genuine boards does not yield
false positives).
The peripheral configuration has been completely reworked to resolve
pin conflicts while provided as much of the peripherals as possible.
The changes include:
- Move `I2C_DEV(0)` from PB6/PB7 to PB8/PB9 to solve pin conflict with
`QDEC_DEV(2)`.
- Use pins PB0, PB1, PB4, and PB5 for PWM instead PA8, PA9, PA10, and
PA11
- PA9 and PA10 is in pin conflict with `UART_DEV(0)` which is used
for stdio with `stdio_uart`, PA8 was in conflict with
`QDEC_DEV(0)`, PA11 was in conflict with USB D-
- Use PB6, PB7 as `QDEC_DEV(0)` (previously `QDEC_DEV(2)`), as this is
the only completely conflict free setting
- Use PB4/PB5 instead of PA6/PA7 for QDEC_DEV(1)
- This fixes a pin conflict with `SPI_DEV(0)` MISO (and
`ADC_LINE(4)`)
- Only provide QDEC at PB4/PB5 when PWM is not used to avoid conflict
- Only provide QDEC at PA8/PA9 when UART is not used to avoid conflict
- Use SPI2 (PB15, PB14, PB13, PB12) as `SPI_DEV(0)` instead of SPI1,
use SPI1 (PA7, PA6, PA5, PA4) as `SPI_DEV(1)`
- Only provide `SPI_DEV(1)` if the ADC is not in used to resolve a
pin conflict
- Move PB0 and PB1 at the end of the ADC lines (previously
`ADC_LINE(6)` and `ADC_LINE(7)`, now `ADC_LINE(8)` and `ADC_LINE(9)`)
- Only provide them when PWM is not in use (to resolve pin conflict
with PWM)
- Also do not provide them for the Blackpill boards, which are
missing pins PB0 and PB1 on the headers
To make life of users easier, a Pinout diagram with the new
configuration was added.
- The tool compatibility matrix got super large
- split out all "single-purpose" tools and list them per platform
- Highlighting code via backticks in titles doesn't render well with
Doxygen
Allow issuing a reset to bootloader sequence by abusing the RTS and
the DTR pins of a TTL adapter. This makes flashing via UART much
more convenient, as no jumpers need to be placed to select booting to
the bootloader / flash and no reset buttons need to be pressed.
Examples have previously relied on the (really: some) nightly toolchain
to be the default. As that, in practice, is a problematic assumption,
the latest toolchain to use is now determined programmatically, and that
is set explicitly on the examples that use nightly.
Workaround-For: https://github.com/rust-lang/rustup/issues/3015
This better reflects the current state of things. Setting the nightly
toolchain as default works better for new users with the current
settings of the examples. Not pinning the C2Rust version -- we don't pin
the nightly version in the docs either, and breakage is easy to track
given the container builds as a base line.
