Migration to the new Arduino I/O mapping, which was not fully covered in PR #19759 when the new Arduino I/O mapping was introduced and the feature handling was changed.
- GPIO2 (LED1_PIN) is used as SPI signal, not only if `sdcard_spi` is enabled. herefore, it must not be defined as LED pin if `periph_spi` is used.
- GIO4 (LED2_PIN) is used by the SDMMC Host Controller as SD Card DAT1 signal and must not be defined as LED pin in that case.
The ESP32 Ethernet Kit has only a single GPIO pin exposed to SAUL via
`saul_gpio`, but that GPIO doubles as PHY clock input when `esp32_eth`
is used. Hence, the `saul_gpio` dep should be optional and only kick
in when `esp32_eth` is not used.
When using `make flash` or `make term` with `MOST_RECENT_PORT=1`, RIOT
should now select relatively robustly the most recently connected
ESP32 Ethernet Kit / ESP32 Wrover Kit board, even with other TTYs
present. This is because the FTDI Dual RS232-HS with two USB2UART
bridges in the chip would be an expensive overkill for most boards,
unless one is using the FTDI chip to big-bang JTAG as well - as done
on the Ethernet Kit and Wrover Kit boards.
- Rename all `arduino_pinmap.h` to `arduino_iomap.h`
- An empty `arduino_pinmap.h` that just includes `arduino_iomap.h`
is provided for backward compatibility
- Move all info from `arduino_board.h` into the new file as trivial
macros, so that they can also be used outside of sketches
- The new name reflects the fact not just pin mappings, but also
other I/O features such as PWMs are mapped
- Drop all `arduino_board.h`
- `arduino_board.h` and `arduino_iomap.h` now provide the exact
same information, just in a different format
- a generic `arduino_board.h` is provided instead that just
uses the info in `arduinio_iomap.h` and provides them in the
format the code in `sys/arduino` expects it
- Add fine grained features to indicate for mappings
- availability of mappings for analog pins, DAC pins, PWM pins,
UART devices, SPI/I2C buses to the corresponding RIOT
identification can now be expressed:
- `arduino_pins`: `ARDUINO_PIN_0` etc. are available
- `arduino_analog`: `ARDUINO_A0` etc. are available
- `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available
- `arduino_dac`: `ARDUINO_DAC0` etc. are available
- `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available
- `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available
- `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available
- mechanical/electrical compatibility with specific form factors
can now be expressed as features:
- `aruino_shield_nano`: Arduino NANO compatible headers
- `aruino_shield_uno`: Arduino UNO compatible headers
- `aruino_shield_mega`: Arduino MEGA compatible headers
- `aruino_shield_isp`: ISP header is available
This provides the groundwork to implement shield support as modules
that can rely on the I/O mappings, rather than having to provide a
configuration per board.
In the board definition of `esp32_wrover_kit` default values for `ESP_WIFI_EAP_USER` and `ESP_WIFI_EAP_PASS` had to be defined because this board was used in the CI to compile the optional module `esp_wifi_enterprise`. Now that the CI compilation for the `esp_wifi_enterprise` module is realized by an external board definition `esp32-ci`, these default values should be removed to make the compilation fail if the user did not define these variables.
Many simple kconfig configurations are added to boards and brought in with the board name.
This makes a common import of these configs so one only requires adding a BOARD.config without having to alter the makefile.
To test compilation of optional ESP32 modules, these modules are enabled for the `esp32-wrover-kit` borad when compiled in CI. The use of some of these optional modules depend on the use of other modules.
Fixes various issues in documentation:
- replaces HTML anchor tags in markdown headings by markdown heading IDs.
- replaces HTML linebreaks by newline commands
- replaces \htmlonly commands for image resizing by the width argument in \image commands
- uses more unique identifiers for references
- uses stable references for driver documentation
- fix broken links to external HTML documents
- replaces the TOC link in headers by a back to TOC link below each section
- replaces ``` fenced code blocks by ~~~
