Martine Lenders
db8954fe60
Merge pull request #11267 from cladmi/pr/isrpipe/separate_read_timeout
...
isrpipe: split isrpipe_read_timeout to isolate xtimer dependency
2019-03-26 22:27:15 +01:00
Martine Lenders
664763bb29
netdev: add doc group for network device types
2019-03-26 21:37:20 +01:00
Gaëtan Harter
29fc58bc79
drivers/at: remove the direct dependency to xtimer
...
`at` is not using the `xtimer` module directly but only through
'isrpipe_read_timeout'.
2019-03-26 21:36:24 +01:00
Gaëtan Harter
b07eecd619
isrpipe: split isrpipe_read_timeout to isolate xtimer dependency
...
This defines a new 'isrpipe_read_timeout' module that should be used when using
the timeout based function of isrpipe.
This fix the implicit dependency to 'xtimer' that is only needed for the
'_timeout' functions.
It prevents 'stdio_uart' that uses 'isrpipe' to need to depend on xtimer.
This was silently solved at link time for most platforms but not for the
'esp32' for example.
'drivers/at' needed to be updated at the same time to follow the api change.
2019-03-26 21:36:24 +01:00
Kevin "Bear Puncher" Weiss
268d3e926c
Merge pull request #10826 from ranbe1/at_driver_uart_initialize_status
...
drivers/at: make at_dev_init() return uart initialize status
2019-03-26 14:07:05 +01:00
Koen Zandberg
c697a3bfd8
usbdev: extend events with suspend/resume
2019-03-25 21:03:21 +01:00
Dylan Laduranty
784af0a9c8
Merge pull request #11213 from bergzand/pr/usb/periph_init
...
usbdev: Add low level initialization to `periph_init()`
2019-03-25 20:49:25 +01:00
Federico Pellegrin
5faafac092
sam0 flashpage RWWEE flash support
2019-03-21 04:27:41 +01:00
Alexandre Abadie
7c285eb186
drivers/lpsxxx: add support for lps22hb
2019-03-20 14:43:37 +01:00
Alexandre Abadie
1f4dee90a1
drivers/lpsxxx: unify lps331ap and lps25h drivers
2019-03-20 14:43:36 +01:00
Marian Buschsieweke
f5cd25bdab
drivers/enc28j60: Allow sending with empty chunks
...
This commit allows `netdev_driver_t::send()` of `enc28j60` to be passed an
`iolist_t` containing one or more empty elements.
2019-03-20 09:57:45 +01:00
Koen Zandberg
cf093c5a25
periph: add low level usbdev initialization
2019-03-20 09:12:24 +01:00
Koen Zandberg
4d352fc93f
usbdev: Extend with low level initialization functions
2019-03-20 09:12:24 +01:00
Jose Alamos
4778776790
sx127x: ignore empty iolist element
2019-03-19 17:30:55 +01:00
Torben Petersen
04d346667b
drivers/bmp180: fix conversion
2019-03-18 09:43:39 +01:00
Martine Lenders
6611be5140
at86rf2xx: don't call tx_load when iol->iol_len == 0
2019-03-15 15:34:38 +01:00
Martine Lenders
51626a48d4
netdev: document valid values for iolist in send()
2019-03-15 11:34:19 +01:00
71204d1d70
Merge pull request #9830 from bergzand/pr/usb/usbdev
...
usbdev: Introducing a generic USB device driver API
2019-03-14 22:48:47 +01:00
Koen Zandberg
9af6c69a93
usbdev: Introduce a common API for USB peripherals
...
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
2019-03-14 21:44:56 +01:00
Leandro Lanzieri
e98de1a91a
drivers/ds3234: Fix doxygen group
2019-03-14 14:32:28 +01:00
Leandro Lanzieri
94a10e9e10
Merge pull request #11132 from MichelRottleuthner/pr_sx127x_add_gpio_pull_config
...
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-14 14:05:56 +01:00
4dcd958dce
Merge pull request #10415 from maribu/encx24j600
...
drivers/encx24j600: Implemented missing drop case
2019-03-11 14:15:40 +01:00
Koen Zandberg
f4bb315db2
Merge pull request #11153 from kaspar030/fix_encx24j600_netopt_linkstate
...
drivers/encx24j600: lock dev in netopt get()
2019-03-11 12:52:27 +01:00
4c2749041b
drivers/encx24j600: lock dev in netopt get()
2019-03-11 12:35:09 +01:00
Gilles DOFFE
8a20936a9d
drivers: add motor_driver implementation
...
Implement motor_driver API to drive CC motors through hardware drivers.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
dd6a37517b
drivers: add motor_driver API
...
This driver API aims to control DC motors.
It handles :
* motor controller associated to a PWM device
* several motors by controller
* motor rotation direction
* brake capability
* enable/disable motor individually
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Alexandre Abadie
d562af40e6
Merge pull request #11144 from jia200x/pr/netdev_lora_rx_info
...
netdev/lora: add netdev_lora_rx_info structure for RX info
2019-03-08 18:36:02 +01:00
Jose Alamos
2fd59067b4
drivers/sx127x: remove netdev_sx127x_lora_packet_info structure
2019-03-08 17:47:43 +01:00
Jose Alamos
80ae186d7a
drivers/sx127x: use netdev_lora_rx_info structure for RX info
2019-03-08 17:47:05 +01:00
Jose Alamos
893707a590
netdev/lora: add netdev_lora_rx_info structure
2019-03-08 17:45:08 +01:00
korotkoves
433ccc9a11
sx127x: set ValidHeader interrupt to NETDEV_EVENT_RX_STARTED event
2019-03-08 08:46:52 +01:00
korotkoves
4ccdb3ac80
sx127x: remove duplicate code + fix for sending
2019-03-08 08:46:51 +01:00
korotkoves
4b60ab07fe
sx127x: fix for sending in implicit headers mode
2019-03-08 08:46:51 +01:00
Michel Rottleuthner
389d258627
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-07 16:09:38 +01:00
Semjon Kerner
c2a40be458
drivers/netdev_ieee802154: add mac header filter
2019-03-04 13:21:43 +01:00
Martine Lenders
2d6a557d83
netdev: introduce test device type
2019-02-26 16:46:21 +01:00
Martine Lenders
727a843ce4
Merge pull request #10905 from maribu/packet_size_l2_pdu
...
net: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}
2019-02-22 15:23:00 +01:00
Joakim Nohlgård
a6f430b4b5
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
...
This driver currently only supports the SPI connected DS3234, and only
for initializing 1 Hz square wave output on the SQW pin, nothing else.
2019-02-19 11:57:40 +01:00
Marian Buschsieweke
a3f1f21410
drivers/xbee: Use NETOPT_MAX_DPU_SIZE
...
Updated xbee to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:02 +01:00
Marian Buschsieweke
09335b07dd
drivers/sx127x: Use NETOPT_MAX_DPU_SIZE
...
Updated sx127x to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:00 +01:00
Marian Buschsieweke
1bd6ac4fff
drivers/netdev_ieee802154: Use NETOPT_MAX_DPU_SIZE
...
Updated netdev_ieee802154 to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:18:58 +01:00
Marian Buschsieweke
d506741d38
drivers/netdev_eth: Use NETOPT_MAX_DPU_SIZE
...
Updated netdev_eth to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:18:56 +01:00
Marian Buschsieweke
556a1e31ff
drivers/cc110x: Use NETOPT_MAX_DPU_SIZE
...
Updated cc110x to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:18:54 +01:00
Yegor Yefremov
0dedf979f3
drivers/sx127x: fix dead links
...
URLs of the datasheets have been changed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-15 21:16:42 +01:00
Leandro Lanzieri
a13ab5ee08
drivers/ad7746: Add SAUL integration
2019-02-15 13:37:45 +01:00
Leandro Lanzieri
85e75cf9f8
drivers/saul: Add capacitance and voltage types
2019-02-15 13:37:45 +01:00
Leandro Lanzieri
50dc5b7528
drivers: Add driver for AD7746 capacitance sensor
2019-02-15 13:31:18 +01:00
smlng
6fc3c82072
drivers/hts211: fix CTRL_REG2_OS_EN
...
fixes #11013
2019-02-14 18:03:35 +01:00
Yegor Yefremov
b8ff48cce4
periph/uart: improve documentation
...
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-11 09:35:23 +01:00
Yegor Yefremov
6bf185855b
drivers/bmx280: fix dead links
...
URLs have been changed to:
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001.pdf
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280-DS002.pdf )
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-08 09:01:20 +01:00
