Koen Zandberg
cbb3e386b4
saml21-xpro: add DMA triggers to spi config
2020-06-14 14:56:22 +02:00
Koen Zandberg
35bf7d5b41
same54-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
Koen Zandberg
fc302edc6f
samd21-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
Koen Zandberg
9a3a5fc343
hamilton: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
Koen Zandberg
c8d5b2cbb2
feather-m0: add DMA triggers to spi config
2020-06-14 14:56:20 +02:00
Koen Zandberg
5c3dad733d
samr21-xpro: Add DMA config for SPI peripherals
2020-06-14 14:56:20 +02:00
benpicco
8ed8775c8e
Merge pull request #14269 from benpicco/cpu/sam0_common/timer_drop_prescaler
...
cpu/sam0_common: drop prescaler from timer config
2020-06-12 14:16:59 +02:00
Francisco
01d0e30229
Merge pull request #14244 from fjmolinas/pr_samr21_usec_min
...
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-12 09:24:52 +02:00
Benjamin Valentin
b082368033
boards/stm32f429i-disco: add support
...
The boards/stm32f429i-disco board is an ealier version of the stm32f429i-disc1.
The boards are compatible with the difference that the older on-board debugger
does not provide a UART connection.
To spare the user of having to wire up a USB-TTL adapter, enable CDC-ACM
on the micro-USB port.
2020-06-11 23:22:37 +02:00
Benjamin Valentin
54b57bd97f
cpu/sam0_common: drop prescaler from timer config
...
since c05984b341ef41b8bc40f93d7fc5acf90e2eee81 the prescaler in the timer
config struct is no longer used.
Let's remove it.
2020-06-11 19:29:43 +02:00
Benjamin Valentin
871107e67f
boards/weact-f411ce: enable automatic reset to bootloader
2020-06-11 16:37:30 +02:00
Francisco Molina
d32467bf03
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-11 15:59:24 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
Francisco Molina
e3469565c8
boards/samr21-xpro: set RTT_MIN_OFFSET
2020-06-11 09:31:17 +02:00
Francisco
52bcdff113
Merge pull request #14245 from fjmolinas/pr_iotlab_baud
...
boards/common/iotlab: don't enforce BAUD
2020-06-11 09:13:03 +02:00
Marian Buschsieweke
1cf1f75db1
Merge pull request #14240 from benpicco/boards/WeAct-f411_dynamic_flash
...
boards/weact-f411ce: determine flash size at run-time
2020-06-10 22:22:59 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco Molina
f556eb6958
boards/common/iotlab: don't enforce BAUD
2020-06-10 13:32:05 +02:00
Benjamin Valentin
59a41968b5
boards/weact-f411ce: determine flash size at run-time
...
The pad for SPI-Flash on the WeAct-f411ce does not come pre-populated.
The user has to manually solder a SPI-flash chip on the board, so specifying
a size here makes no sense.
Instead, rely on automatic detection of the flash size at run-time.
2020-06-10 12:10:29 +02:00
Leandro Lanzieri
58cd126517
Merge pull request #14210 from btcven/2020_06_04-cc26xx_cc13xx_kconfig
...
boards/cc26xx_cc13xx-based: model features in Kconfig
2020-06-10 11:27:31 +02:00
Jean Pierre Dudey
3f2be3784b
boards/cc2650stk: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
b87efa3c4b
boards/cc2650-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
eb599fd5dc
boards/cc1352p-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
6db36b75b4
boards/cc1352-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
ef1fdb5ab4
boards/cc1312-launcpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Kees Bakker
723fe93850
boards/common/sodaq: add XTIMER_DEV and make it equal to other SAMD21
...
For some reason this was looked over a while back.
This resolves issue #14217
2020-06-07 22:25:30 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Jean Pierre Dudey
283aacbecd
boards/cc26x2_cc13x2-based: move config to common
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:52 -05:00
Marian Buschsieweke
b44ac93558
boards/serpente: Deduplicate serial/programmer handling
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
17b890c16e
boards/{arduino,wemos}-zero: Dedpulicated code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
8b9a98233e
boards: Add support for the WeMos-Zero
...
This is an Arduino Zero clone without the embedded debugger. Thus, it will be
flashed by default using the U2F bootloader and uses by default USB CDC ACM for
STDIO.
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
de189a33f4
boards/arduino-zero: Factor out common code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
fc91e8019e
Merge pull request #12778 from benpicco/boards_WeAct-f411ce
...
boards: add WeAct-f411ce
2020-06-04 13:06:25 +02:00
Benjamin Valentin
b20ec93991
boards: add WeAct-f411ce board
...
The WeAct-F411CE is a blackpill-like board with a STM32F411CE.
It can be flashed using the vendor-provided bootloader.
2020-06-04 12:39:14 +02:00
Marian Buschsieweke
5eeb0725e0
boards/arduino-zero: Fix units & alignment in doc
2020-06-04 11:24:26 +02:00
Marian Buschsieweke
1408f29aa4
boards/airfy-beacon: Fix units & alignment in doc
2020-06-04 11:24:25 +02:00
Marian Buschsieweke
b2b8639e19
boards/6lowpan-clicker: Fix units in doc
2020-06-04 09:31:59 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig
...
boards/samr21-xpro: Model features in Kconfig
2020-06-03 09:39:41 +02:00
Alexandre Abadie
954ac22c45
Merge pull request #13865 from benpicco/usb_custom_id
...
USB VID/PID: allow for boards to define default custom VID/PID
2020-06-02 18:42:37 +02:00
Leandro Lanzieri
4c74881904
boards/samr21-xpro: Add board specific Kconfig symbols
2020-06-02 17:42:16 +02:00
Benjamin Valentin
cb21aea5f6
boards/serpente: properly configure USB ID
2020-06-02 14:17:55 +02:00
Alexandre Abadie
02ce7c0332
Merge pull request #14161 from bergzand/pr/nrf52840dk/move_spi_flash_periph
...
nrf52840dk: move SPI flash to SPIM2 peripheral
2020-06-02 13:14:35 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
200afc46fa
cpu/atmega328p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
a950d6bbb6
cpu/atmega{128rfa1,256rfr2}: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
9138e48746
cpu/atmega32u4: Relocate default timer config
2020-05-28 16:27:06 +02:00
Koen Zandberg
d9436171e9
nrf52840dk: move SPI flash to SPIM2 peripheral
...
The SPIM1 peripheral overlaps with TWIM1. TWIM1 is already configured as
the default peripheral for the I2C interface. This commit moves the
peripheral used for the SPI flash to SPIM2. This peripheral is dedicated
for SPI operations and doesn't conflict with other peripherals
2020-05-28 11:55:08 +02:00
benpicco
a5836a6b27
Merge pull request #14128 from btcven/2020_05_24-cc13x2-i2c
...
cc26xx_cc13xx: add periph_i2c implementation
2020-05-25 22:35:55 +02:00
