In Engineering mode (BOOT0 off and BOOT2 on), only the Cortex-M4
core is running. It means that all clocks have to be setup
by the Cortex-M4 core.
In other modes, the clocks are setup by the Cortex-A7 and then should
not be setup by Cortex-M4.
stm32mp1_eng_mode pseudomodule have to be used in Engineering mode
to ensure clocks configuration with IS_USED(MODULE_STM32MP1_ENG_MODE)
macro.
This macro can also be used in periph_conf.h to define clock source
for each peripheral.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
In case of muticore CPU, openocd opens one debug port by core for gdb.
Thus add a GDB_PORT_CORE_OFFSET port offset to select the right port
for debugging.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
For multi-arch SoC like STM32MP1, the right target core has
to be selected to avoid debugging the wrong default cpu.
This is done using openocd command 'targets ${OPENOCD_CORE}'.
OPENOCD_CORE has to be set in board Makefile.include file.
In case it is not set, the command just display available targets, thus it
has no effect on already existing boards using openocd.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
Expose the auto-negotiation feature of the Ethernet device via the
pseudo-module stm32_eth_auto. With this enabled, the static speed configuration
set in the boards periph_conf.h will only be used if the PHY lacks
auto-negotiation capabilities - which is unlikely to ever happen.
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This feature is only used to blacklist stdio via CDC ACM.
Introduce the `highlevel_stdio` feature instead to indicate
that stdio functionality requires a running thread to print
anything
This adds a check in the build process to verify that no ERROR_ Kconfig
symbols are set. These symbols indicate invalid conditions in the
Kconfig configuration.
This requires -nostartfiles to be only passed to the linker, not the
compiler, as it is a linker flag and passing it to the compiler causes a
clang warning to be emitted.
Additionally, clang does not seem to support `-mcmodel=medlow` and
`-msmall-data-limit=8` but these options do not seem strictly necessary
to me anyhow thus they are deactivated conditionally when using clang.
Busybox grep does not support long options. In fact, the utilized long
options are not mandated by POSIX.1-2008. Using the short options allows
building RIOT on Alpine Linux which utilizes Busybox instead of GNU
coreutils by default.
