Benjamin Valentin
b34b67feee
drivers/dose: reduce struct padding
...
By moving all the single byte struct elements to the end, we can reduce
padding inside `dose_t` and ensure that `recv_buf` is always aligned.
This saves some RAM:
master
------
text data bss dec hex filename
36384 136 12944 49464 c138 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.e
this patch
----------
text data bss dec hex filename
36484 136 12936 49556 c194 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.elf
2021-11-12 16:19:20 +01:00
Francisco
b609646961
Merge pull request #17138 from fjmolinas/pr_sx126x_fixes
...
drivers/sx126x: fix sync word and TX PA configuration
2021-11-11 10:59:08 +01:00
benpicco
026d6cfba1
Merge pull request #16768 from benpicco/drivers/dose-timeout_bytes
...
drivers/dose: calculate timeout based on symbol rate
2021-11-10 12:40:13 +01:00
Francisco
035ee0a595
Merge pull request #17172 from kaspar030/drivers_ds18_missing_stdint.h
...
drivers/ds18.h: add missing stdint.h include
2021-11-10 08:42:03 +01:00
5d3a4d63d8
drivers/ds18.h: add missing stdint.h include
2021-11-09 21:48:48 +01:00
benpicco
12ade5a8b5
Merge pull request #16752 from benpicco/drivers/dose-standby
...
drivers/dose: enable standby pin
2021-11-09 18:20:17 +01:00
Benjamin Valentin
6c1481b6ee
drivers/dose: enable standby pin
...
Some CAN transceivers have a standby pin that has to be pulled low
in order to use it.
If the interface is disabled we can set it to high again to save some
power.
2021-11-09 15:19:35 +01:00
Francisco Molina
e17e3254e1
drivers/sx126x: add tx_pa_mode
...
BOARDs with RF switch might only support one of the TX modes, and
on init the BOARD needs to be configured accordingly and the correct
mode selected on TX.
2021-11-08 18:42:05 +01:00
Marian Buschsieweke
5e75047a2b
drivers/lis3dh: fix unaligned memory access
...
The bogus packed attribute added to lis3dh_data_t resulted in the
structure being aligned two 1 byte. It was later casted to an
uint16_t pointer (which is aligned two 2 bytes). By dropping the
packed attribute the alignment mismatch is fixed.
2021-11-06 20:05:05 +01:00
Alexandre Abadie
26346188b9
Merge pull request #17105 from aabadie/pr/drivers/ata8520e_ztimer
...
drivers/ata8520e: migrate to ztimer
2021-11-05 16:22:59 +01:00
Alexandre Abadie
baa1ed38cc
drivers/ata8520e: migrate to ztimer
2021-11-05 12:49:37 +01:00
benpicco
bfb8d1d3fd
Merge pull request #17014 from benpicco/periph/gpio-cb_not_NULL
...
drivers/periph/gpio: state that interrupt callback must not be NULL
2021-11-05 12:47:16 +01:00
Alexandre Abadie
295092bc29
drivers/rn2xx3: migrate to ztimer
2021-11-04 10:39:36 +01:00
Francisco Molina
472f6495a8
drivers/xbee: migrate to ztimer_msec
2021-11-02 21:46:19 +01:00
Ollrogge
c6e94aa6be
periph/flashpage.h: add comment about riotboot impact on flashpage layout
2021-10-26 14:35:33 +02:00
Francisco
7f3344870d
Merge pull request #16972 from Ollrogge/flashpage_pr
...
periph/flashpage: extend API
2021-10-26 12:51:05 +02:00
Koen Zandberg
9f8aee4e95
usbdev: Deprecate USBDEV_EVENT_TR_FAIL
2021-10-24 19:33:29 +02:00
Ollrogge
72d47013dd
periph/flashpage: extend API
2021-10-19 22:33:09 +02:00
Benjamin Valentin
f624eb473a
drivers/periph/gpio: state that interrupt callback must not be NULL
...
This allows us to use `assert(cb != NULL)` inside `gpio_init_int()`
and save a few cycles of interrupt latency.
2021-10-19 21:26:50 +02:00
Gunar Schorcht
62dd51d8ba
drivers: add anchor to doc to allow stable references
2021-10-13 17:37:16 +02:00
Jose Alamos
503f5a9ddb
netdev: add netdev_register_signal
2021-10-05 14:35:07 +02:00
benpicco
7bfcda979b
Merge pull request #16906 from benpicco/rtt_rtc.h-doxfix
...
rtt_rtc: clarify documentation about epoch
2021-09-28 16:11:34 +02:00
Benjamin Valentin
928c593bca
rtt_rtc: clarify documentation about epoch
...
`epoch` in this context refers to `RIOT_EPOCH`, not Unix Epoch.
Clarify the documentation to avoid confusion.
2021-09-28 15:12:14 +02:00
Vera Clemens
06359e05ad
drivers/lpsxxx: add support for lps22hh
2021-09-22 17:54:02 +02:00
Francisco
2d0a6874c7
Merge pull request #16763 from benpicco/drivers/lm75-saul
...
drivers/lm75: add SAUL integration
2021-09-21 10:41:58 +02:00
benpicco
b6a2d08afc
Merge pull request #15915 from fabian18/ina3221-fixes
...
drivers/ina3221: style fixes and improvements
2021-09-16 22:22:33 +02:00
benpicco
c98c488559
Merge pull request #16746 from jia200x/pr/hal/fb_lock
...
ieee802154/submac: reimplement using FSM
2021-09-03 18:13:58 +02:00
Jose Alamos
8f97f73453
ieee802154/submac: reimplement using FSM
2021-09-03 15:00:47 +02:00
Benjamin Valentin
0ee0c5e40e
drivers/periph: define periph_rtc_mem
2021-09-03 11:43:42 +02:00
Francisco
a1cbcc9ede
Merge pull request #15902 from maribu/spi-api-change-1
...
drivers/periph_spi: let spi_acquire return void
2021-09-02 08:50:56 +02:00
benpicco
9294a31856
Merge pull request #16781 from benpicco/flashpage_page-const
...
drivers/flashpage: flashpage_page() takes a const argument
2021-08-31 10:22:46 +02:00
Jean Pierre Dudey
719a18ca8b
Merge pull request #16773 from jeandudey/ili9341-flip
...
drivers/ili9341: add rotation mode to ili9341_params_t
2021-08-27 14:21:56 +02:00
Benjamin Valentin
f903ec90d4
drivers/flashpage: flashpage_page() takes a const argument
...
All addresses to flashpage_page() must be in flash. Flash memory is
`const`, therefore this function must also take `const` pointers.
2021-08-27 14:08:25 +02:00
Jean-Pierre De Jesus DIAZ
e6cce1a15f
drivers/ili9341: add rotation mode to ili9341_params_t
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Benjamin Valentin
3399a6476a
drivers/dose: calculate timeout based on symbol rate
...
A fixed timeout is either too long for high symbol rates or too short
for low symbol rates.
To fix this, calculate the timeout based on the symbol rate.
For this, the old 5ms timeout is equivalent to 58 bytes being transmitted
at 115200 baud (8 data bit + start & stop bit).
I rounded this to 50 bytes which should yield 4340 µs.
2021-08-25 20:48:54 +02:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
Benjamin Valentin
fc457459bf
drivers/lm75: cleanup
2021-08-24 14:34:52 +02:00
Benjamin Valentin
75e2a65681
drivers/flashpage: add missing include
2021-08-24 14:30:23 +02:00
benpicco
be85777cd1
Merge pull request #16678 from viktorbatista/modules/lm75
...
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 18:04:12 +02:00
Vitor Batista
9267fa2670
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 17:09:40 +02:00
benpicco
71953c984c
Merge pull request #16534 from jia200x/pr/detach_radio_hal_descriptor
...
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 18:15:51 +02:00
Jose Alamos
ddc9c7c686
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 15:24:10 +02:00
Jose Alamos
8c0c603146
drivers/at86rf215: remove msg queue dependency
2021-08-16 15:28:06 +02:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Marian Buschsieweke
7aab478678
drivers/soft_spi: update API to match periph_spi
2021-08-06 12:47:00 +02:00
Marian Buschsieweke
9e5f7b6797
drivers/periph_spi: make spi_acquire() return void
...
There is no way to properly handle incorrect SPI parameters at run time, so
just having an assertion blow up is the better choice here.
As most instances of `spi_acquire()` don't check the return value anyway, this
will improve debugging experience quite a bit. Some implementation of
spi_acquire() don't even check parameters anyway.
2021-08-06 12:46:57 +02:00
benpicco
feac187d54
Merge pull request #16506 from benpicco/drivers/dose-rx_start
...
drivers/dose: make use of start condition received interrupt
2021-07-28 17:21:29 +02:00
Benjamin Valentin
d48f673597
drivers/dose: make use of periph_uart_rx_start feature
2021-07-28 16:19:04 +02:00
Benjamin Valentin
0964a217b5
rtt_rtc: add rtc_settimeofday() & rtc_gettimeofday()
2021-07-27 22:12:25 +02:00
Benjamin Valentin
9194440ead
drivers/periph/uart: add periph_uart_rx_start feature
2021-07-27 16:29:30 +02:00
