Some SDK interrupt service routines obviously use malloc/free in the interrupt context. Because the rmutex-based lock/unlock approach of the malloc/free function suite of the newlib does not work in the interrupt context, the SDK memory management functions MUST therefore be used. To use the same memory management functions in RIOT as in the SDK, the malloc/free function suite has to be replaced by wrapper functions.
Fixes sporadic blocking of the wifi thread in esp_wifi_recv_cb function under heavy network load conditions when frames are coming in faster than they can be processed. Since esp_wifi_recv_cb function is not executed in interrupt context, the msg_send function used for ISR event can block when the message queue is full. With this change esp_wifi can be flooded with icmpv6 packets of maximum size without any problems over hours.
During flash write access, the IROM cache cannot be used and is disabled therefore. During that time, ets_post crashes if a functions is called which is not in IRAM. Therefore thread_flags_set must not be called if IROM cache is disabled.
Changes of ETS task handling require the context switch by software interrupt. The context switch based on interrupt is therefore enabled by default. Furthermore, the number of priority levels are increased due to the new additional thread.
Fixes sporadic blocking of the wifi thread in esp_wifi_recv_cb function under heavy network load conditions when frames are coming in faster than they can be processed. Since esp_wifi_recv_cb function is not executed in interrupt context, the msg_send function used for ISR event can block when the message queue is full. With this change esp_wifi can be flooded with icmpv6 packets of maximum size without any problems over hours.
RX callback function should be register when WiFi has been connected to AP successfully and should be unregistered when WiFi disconnects from AP. Therefore, esp_wifi_internal_reg_rxcb is called now in event handler on event SYSTEM_EVENT_STA_CONNECTED. It is reset now on event SYSTEM_EVENT_STA_DISCONNECTED.
Before function wifi_connect is executed, starting the WiFi driver should have been finished. This is indicated by the WiFi driver by sending event SYSTEM_EVENT_STA_START. Function wifi_connect is moved therefore to the event handler for SYSTEM_EVENT_STA_START.
