Vincent Dupont
4647659ea8
boards: fix CLOCK_PLL_PREDIV on stm32f1xx boards
2020-03-09 18:00:48 +01:00
Leandro Lanzieri
ab10b33848
boards/esp32-wroom-32/doc: Add SPI freq configuration for mrf24j40
2020-03-09 16:51:35 +01:00
Leandro Lanzieri
cffc9b70bf
boards/esp32-wroom-32: Remove drivers configuration from Makefile.dep
...
This removes the configuration parameters for mrf24j40 and enc28j60
drivers, which were present in the boards's Makefile.dep. There is
already documentation regarding how to correctly configure these devices
for the board.
2020-03-09 16:49:11 +01:00
Alexandre Abadie
2ec09ebd74
boards/nrf52: remove useless export of FLASH_TARGET_TYPE
2020-03-08 15:12:44 +01:00
Marian Buschsieweke
8fd8c8273f
boards/{nucleo-f103rb,b*pill}: Expose JTAG pins as GPIOs
...
The Nucleo-F103RB comes with an internal SWD programmer/debugger. Thus, the JTAG
pins are not going to be used for debugging / programming anyway. The pins are
exposed on the headers, so allowing them to be used as GPIOs make a lot of
sense.
The Bluepill / Blackpill boards only expose the SWD pins on the debug header,
but the JTAG pins (not also used by SWD) are exposed on the GPIO pin headers.
Hence, exposing them as regular GPIOs seems to be a reasonable choice.
2020-03-08 13:06:34 +01:00
Koen Zandberg
3e97c01c33
thingy52: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:42 +01:00
Koen Zandberg
74022a4bb8
ruuvitag: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:42 +01:00
Koen Zandberg
0573db8a85
reel: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:42 +01:00
Koen Zandberg
bef16095df
pinetime: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:42 +01:00
Koen Zandberg
cbd3c1c643
particle-*: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:42 +01:00
Koen Zandberg
822590ad56
nrf52840-mdk: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
Koen Zandberg
87b2aa5ed9
nrf52832-mdk: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
Koen Zandberg
71589a11ec
nrf51dk: Enable the nRF51 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
Koen Zandberg
bea3f71f91
nrf52xxxdk: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
Koen Zandberg
ec2a3d33c8
acd52832: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
benpicco
7396d05605
Merge pull request #13575 from fjmolinas/pr_cc2538_rf_deps
...
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 18:00:51 +01:00
Francisco Molina
80ecac5fde
boards: use cc2538_rf as netdev_default for CPU=cc2538
2020-03-06 14:17:52 +01:00
Francisco Molina
ff6f6618fb
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 14:17:19 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
Koen Zandberg
ed316309c8
Merge pull request #11874 from kaspar030/ztimer
...
sys/ztimer: initial import
2020-03-06 09:46:27 +01:00
benpicco
681678e3f3
Merge pull request #13537 from jue89/feature/sam0-spi-frequency
...
cpu/sam0_common: mitigate rounding errors of SPI baud rate calculation
2020-03-04 16:50:46 +01:00
f49e756436
boards/ek-lm4f120xl: add ztimer config, increase ztimer_usec_min
2020-03-04 12:44:03 +01:00
a2c0823063
boards/native: add ztimer configuration
2020-03-04 12:44:03 +01:00
84365e326a
boards/*-kw41z: add ztimer_msec config
2020-03-04 12:44:03 +01:00
73adecc02d
boards/samr21-xpro: add ztimer config
2020-03-04 12:44:03 +01:00
eafba65911
boards/common/arduino-atmega: add ztimer configuration
2020-03-04 12:44:03 +01:00
Koos
24b9b99fee
boards/stm32f3discovery: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
f970f67785
boards/sodaq-sara-aff: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
ed2ea24405
boards/sodaq-autonomo: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
2a253ed175
boards/saml11-xpro: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
8219685be1
boards/nrf52840-mdk: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
6dd8b2deac
boards/frdm-k64f: Updated broken image link
2020-03-04 09:54:36 +01:00
Koos
cec9817b2e
boards/arduino-mega2560: Updated broken image link
2020-03-04 09:54:36 +01:00
benpicco
7792f91ddc
Merge pull request #13535 from btcven/2020_03_02-cc1312-openocd
...
boards/cc1312-launchpad: add OpenOCD configuration
2020-03-04 00:26:14 +01:00
Jean Pierre Dudey
6e77d9194b
boards/cc1352-launchpad: enable OpenOCD
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-03-03 13:42:33 -05:00
Jean Pierre Dudey
ca2e2a4289
boards/cc1312-launchpad: add OpenOCD configuration
...
This enables OpenOCD for the CC1312 LaunchPad.
All we need is:
- The Texas Instruments version of OpenOCD
(https://git.ti.com/cgit/sdo-emu/openocd )
- Set the `PROGRAMMER` environment variable to `openocd`.
- Connect a cc1312-launchpad and play with the commands.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-03-03 13:42:29 -05:00
Martine Lenders
e4f27b415e
Merge pull request #13394 from benpicco/atmega-rtc
...
cpu/atmega_common: implement emulated RTC support
2020-03-03 19:03:47 +01:00
Alexandre Abadie
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
Benjamin Valentin
1dd260b446
boards: enable RTC for every ATmega board that supports RTT
...
Every ATmega board that can run an Real Time Timer can also run
an emulated Real Time Clock.
Got all supported boards by adding `FEATURES_REQUIRED += arch_8bit`
to `tests/periph_rtt` and running
sed -i 's/FEATURES_PROVIDED += periph_rtt/
FEATURES_PROVIDED += periph_rtc\n
FEATURES_PROVIDED += periph_rtt/g'
on them.
2020-03-03 16:27:44 +01:00
Alexandre Abadie
26222d601c
boards/arduino-mkr: don't export MKR_JLINK_DEVICE variables
2020-03-03 14:18:03 +01:00
Alexandre Abadie
d10211b7ff
boards/esp32-wroom-32: don't export _PARAM_DEFINED variables
2020-03-03 14:18:03 +01:00
Alexandre Abadie
a8b81adbd2
boards/cc2650*: don't export XDEBUGGER variable
2020-03-03 14:18:03 +01:00
Alexandre Abadie
21f48af3cd
boards/nz32-sc151: don't export ID variable
2020-03-03 14:18:03 +01:00
Alexandre Abadie
2722869dbb
boards/arduino-due: don't export BOSSA_ARDUINO_PREFLASH
2020-03-03 14:18:03 +01:00
Alexandre Abadie
acce5e22d1
boards/pic32: don't export APPDEPS
...
This variable is already export in vars.inc.mk
2020-03-03 14:18:03 +01:00
Alexandre Abadie
cc48b67fb5
boards/pic32: don't export USE_UHI_SYSCALLS
2020-03-03 14:18:03 +01:00
Alexandre Abadie
b7f5b18991
boards: don't export ROM_OFFSET variable
2020-03-03 14:18:03 +01:00
Alexandre Abadie
bd81060354
boards/{telosb,iotlab}: remove useless export for BAUD
...
The variable is already eported in serial.inc.mk
2020-03-03 14:18:03 +01:00
Francisco
3f062a78b2
Merge pull request #13045 from aabadie/pr/boards/remote_factorize
...
boards/remote*: cleanup and factorize code in peripheral configuration headers
2020-03-03 13:21:04 +01:00
Alexandre Abadie
481f3bcb35
Merge pull request #13180 from fjmolinas/pr_slwstk6000b_cleanup
...
boards/slwstk6000b-*: cleanup
2020-03-03 13:15:03 +01:00
