kaspar/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-12-18 11:03:50 +01:00
Code Releases Activity
38,600 Commits 45 Branches 205 Tags
Commit Graph

5624 Commits

Author SHA1 Message Date
Francisco
2a3fbf38f6
Merge pull request #16301 from IchiroKuroki/arduino_nano_33_iot_support 
Configuration extension for arduino-nano-33-iot
 2021-04-20 09:48:24 +02:00
Ichiro Kuroki
1cc02aef2f boards/arduino-nano-33-iot: extend SPI configuration 2021-04-13 18:08:06 +03:00
Ichiro Kuroki
068f029cc8 boards/arduino-nano-33-iot: add ADC configuration 2021-04-13 18:07:51 +03:00
Ichiro Kuroki
a8e9a985d5 boards/arduino-nano-33-iot: add PWM configuration 2021-04-13 18:07:29 +03:00
chrysn
5239f5ed13 boards/microbit-v2: Add buttons 2021-04-13 11:09:57 +02:00
iosabi
73fab03e31 boards/common/esp8266: Set RTS and DTR to 0 on pyterm. 
When flashing the ESP8266 with the flash tool it is possible to connect
RTS to the reset line and DTR to GPIO0 to automatically reboot the
device into flash mode and then reboot the device again into normal
mode.

pyterm leaves these two signals unset unless we specify a --set-rts=0 or
1, and the value of these lines would depend on the UART driver.

This patch explicitly sets RTS and DTR to 0 (high level) in the
Makefile.include config so `make term` releases the reset line,
otherwise the device may be left in reset mode after pyterm starts.
 2021-04-10 22:50:35 +02:00
Gerson Fernando Budke
6149531684 boards: Introduce atxmega-a3bu-xplained board 
Add initial version.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-04-07 20:06:11 -03:00
Marian Buschsieweke
6fe7164dae
Merge pull request #16285 from maribu/boards/msbiot 
boards/msbiot: fix param for MPU9150
 2021-04-07 16:56:20 +02:00
Marian Buschsieweke
9c77cd8d55
boards/msbiot: fix param for MPU9150 
When the driver for the mpu9150 has been renamed to mpu9x50, the
corresponding macro in the MSB-IoT board was forgotten to be renamed
as well. This fixes the issue.
 2021-04-07 15:18:30 +02:00
Francisco Molina
67302bfae6
board/feather-nrf52840: add uf2 boot loader 2021-04-07 12:42:30 +02:00
Marian Buschsieweke
ac774f3404
Merge pull request #16212 from nandojve/xmega_pm 
cpu/atxmega: Add periph power management
 2021-04-07 11:45:24 +02:00
Raimund Oude Hengel
030ac02004 boards/nucleo-f303re: fix I2C[1] sda_pin and scl_af settings 2021-04-07 05:43:06 +02:00
Gerson Fernando Budke
948b490cdf boards/atxmega-a1u-xpro: Add periph_pm properties 
The periph_pm requires new field to control the power management
feature.  Add missing config at periph_conf for timers and uart.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-04-02 14:24:31 -03:00
benpicco
cb06924fb2
Merge pull request #16239 from nandojve/xplained-mini 
boards: introduce atmega328p-xplained-mini
 2021-03-31 13:37:56 +02:00
chrysn
fa9a297e7c
Merge pull request #16250 from chrysn-pull-requests/nrf52-more-timers 
cpu/nrf52: Expose more timers
 2021-03-30 20:28:27 +02:00
chrysn
1da4693e5c b/c/microbit: Use timer 2 on microbit-v2 
Timer 1 is already in use for NRF802154_TIMER
 2021-03-30 16:34:44 +02:00
chrysn
2b09d3162a cpu/nrf52: Expose more timers 2021-03-30 16:34:44 +02:00
Francisco Molina
d2fdb7479e
boards/arduino-due: allow changing frequency 2021-03-30 14:22:50 +02:00
Francisco
f82e9a3691
Merge pull request #16248 from chrysn-pull-requests/microbit-boards-link-display 
boards/microbit*/doc: Link to matrix display driver
 2021-03-30 10:47:03 +02:00
Francisco
241e51e18a
Merge pull request #16208 from madokapeng/nucleo-f767zi-add-CAN 
boards/nucleo-f767zi: Add periph_can support
 2021-03-30 10:46:04 +02:00
chrysn
6d242c9d51 boards/microbit*/doc: Link to matrix display driver 2021-03-29 22:09:52 +02:00
Dylan Laduranty
c9cf60db20
Merge pull request #16181 from h-filzer/bastwan 
boards/bastwan: Support BastWAN Board
 2021-03-27 21:54:53 +01:00
Gerson Fernando Budke
4a9f0efb6d boards: introduce atmega328p-xplained-mini 
Add ATmega328P Xplained Mini board.  The board is an official
development kit from MCHP based on the Arduino UNO, reduced
hardware, with a xplainedmini debugger and CDC ACM serial
converter.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-03-27 14:10:19 -03:00
Lokotius
303ac4ded2 boards/bastwan: Support BastWAN Board 
This board is based on rak4260 with rak specific pinmappings.
ADC, LED and UART as well as USB ist supposed to work.
Mostly adopted from SAM R34 Xplained Pro board with adoption to rak pinout.
 2021-03-25 16:21:18 +01:00
chrysn
e711e96f9d boards/microbit-v2: Add links to schematics etc. 2021-03-23 16:16:39 +01:00
benpicco
ee5b70730b
Merge pull request #15758 from nandojve/avr8_xmega 
Introduce ATxmega CPU and Boards
 2021-03-20 22:09:07 +01:00
madokapeng
6ef41356bc boards/nucleo-f767zi: Add periph_can support 2021-03-18 20:57:22 -04:00
benpicco
bbc13af977
Merge pull request #16195 from dylad/pr/boards/define_btn_mode 
boards: use BTNx_MODE when defined
 2021-03-17 15:39:22 +01:00
Benjamin Valentin
c697b8cfa7 boards/nrf52840dongle: enable VDDH SAUL sensor 2021-03-17 15:35:24 +01:00
Karl Fessel
a6bf444489 board/native: undefine FORTIFY_SOURCE to avoid printf replace 
printf may be replaced by libc printf_chk if _FORTIFY_SOURCE is
defiend. This undefines it
 2021-03-16 12:14:00 +01:00
Karl Fessel
cfaa57fe6c board/native: no omit frame pointer if backtrace is used 
this makes riots test work but may have different result than O0
see man 3 backtrace #NOTES
 2021-03-16 12:12:49 +01:00
Karl Fessel
4d645a23aa board/native: add basic debugging compatible optimization 
adds -Og to board/native CFLAGS
 2021-03-16 11:54:01 +01:00
Gerson Fernando Budke
b843cfb5c2 boards: Introduce atxmega-a1u-xpro board 
Add initial version.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-03-15 20:16:10 -03:00
Gerson Fernando Budke
85fcba0ce9 boards/common: Introduce Atmel xmega common 
Add atxmega common board definitions.  This works is a port from @josar
with few modifications.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-03-15 20:16:10 -03:00
Gerson Fernando Budke
d041199825 cpu/avr8_common: Move irq_enable from board to cpu 
Some mega boards enabling global irq at board_init.  This moves that
responsability to cpu/avr8_common to create a common point to all
variants.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-03-15 20:16:10 -03:00
dylad
187b79fa74 boards: use BTNx_MODE when defined 2021-03-15 21:26:50 +01:00
madokapeng
a38cd1477e boards/nucleo-f722ze: Add periph_can support 
cpu/stm32: Add CAN support for f722ze board

f722ze board has ONLY 1 CAN interface, fix compiling error which
treats f722xx has more than 1 CAN.
 2021-03-05 23:22:44 -05:00
Jose Alamos
de1072725f
boards/yarm: add missing comment ending in doc.txt 2021-03-05 09:31:09 +01:00
Francisco
d369dffb4f
Merge pull request #14339 from aabadie/pr/sys/auto_init_screen 
drivers: sys/auto_init: pkg/lvgl: setup disp_dev, touch_dev and lvgl auto_init
 2021-03-04 19:23:32 +01:00
Alexandre Abadie
3969f24dbe
boards: automatically import disp and touch device drivers 2021-03-03 18:00:49 +01:00
Alexandre Abadie
18e58e4963
boards/stm32f3discovery: add lsm303dlhc configuration 2021-03-02 17:27:14 +01:00
Alexandre Abadie
8072333802
boards/sensebox_samd21: refactor to use USB CDC ACM for stdio 2021-02-24 17:07:33 +01:00
Alexandre Abadie
6cc78ad2f1
boards/sensebox_samd21: don't include Makefile.dep in Makefile.include 2021-02-24 17:07:33 +01:00
Alexandre Abadie
6e1fe9ead6
boards/sensebox: set bossa as supported programmer 2021-02-24 13:30:34 +01:00
Alexandre Abadie
6adef79c7b
boards/spark-core: set dfu-util as supported programmer 2021-02-24 13:30:34 +01:00
Alexandre Abadie
87cf4e387f
boards: set supported programmers 2021-02-24 13:30:34 +01:00
Alexandre Abadie
a13344fa1b
boards/mips: set supported programmers 2021-02-24 13:30:21 +01:00
Alexandre Abadie
8d9cc3c100
boards/msp430: setup supported programmers 2021-02-24 13:29:56 +01:00
Alexandre Abadie
5b77361cc4
boards/cc26x2_cc13x2: set supported programmers 
For now, only openocd and uniflash are supported
 2021-02-24 13:29:39 +01:00
Alexandre Abadie
1cb2221273
boards/atmega: set avrdude as only supported programmer 2021-02-24 13:29:39 +01:00