Gunar Schorcht
990feeec39
boards: enable feature tinyusb_device for STM32 boards
2022-09-30 19:05:51 +02:00
Marian Buschsieweke
1fd9913293
boards/common/stm32: clean up LED definitions
...
Let boards only define the port and pin number of each LEDs. The common
definitions in `stm32_leds.h` will provide `LED<x>_ON`, `LED<x>_OFF`,
`LED<x>_TOGGLE`, `LED<x>_PIN`, `LED<x>_MASK` and `LED<x>_PORT`.
In addition to code de-duplication, this also makes it easier to use
LEDs in GPIO LL, which can be beneficial for super low overhead
debugging output - e.g. when a bug is timing sensitive and `DEBUG()`
would spent to much time for stdio to reproduce a bug.
2022-08-08 23:35:06 +02:00
Alexandre Abadie
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
Francisco Molina
464d941a3e
boards: drop empty custom board_init & empty board.c
2022-02-22 18:27:37 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
Alexandre Abadie
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
Alexandre Abadie
c2420e0577
boards/p-l496g-cell02: add riotboot feature
2022-01-03 15:37:09 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
Koen Zandberg
046394db91
p-l496g-cell02: add usbdev feature
2021-12-01 10:15:19 +01:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Alexandre Abadie
b53d750029
boards/stm32: set openocd as only supported programmer
2021-02-24 13:29:16 +01:00
Alexandre Abadie
603186f913
make: namespace openocd DEBUG_ADAPTER variable
2021-02-23 21:22:52 +01:00
Alexandre Abadie
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
Alexandre Abadie
4c290e1f92
boards: remove include of serial.inc.mk
2020-12-02 09:20:57 +01:00
Alexandre Abadie
c6ad85a7b0
boards: don't include programmer logic at board level
2020-11-25 22:31:13 +01:00
Alexandre Abadie
e7ac68e1bd
boards/stm32l4/l5/wb*: add Kconfig clock config
2020-11-10 09:34:06 +01:00
Alexandre Abadie
39e06babf5
boards/stm32: use generic clk_conf.h header
2020-10-27 08:44:56 +01:00
Alexandre Abadie
9dd20c0ccb
cpu: boards: stm32l4/wb: use IS_USED for clock where possible
2020-09-08 18:42:42 +02:00
Alexandre Abadie
79e6d9df85
boards/stm32l4*: adapt to new clock configuration
2020-09-08 18:42:42 +02:00
Alexandre Abadie
95057a8aef
boards/stm32l4: rename common clock config header
2020-09-08 18:42:41 +02:00
Koen Zandberg
2f3f1e0da2
p-l496g-cell02: remove obsolete spi_divtable include
2020-08-18 16:55:12 +02:00
Alexandre Abadie
7b9f435f70
boards/stm32l4: use common spi_divtable where possible
2020-08-07 12:25:18 +02:00
Alexandre Abadie
847af73500
boards/p-l496g-cell02: model features in Kconfig
2020-07-16 11:34:04 +02:00
Alexandre Abadie
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
Alexandre Abadie
9cc338d29e
boards/nucleo-l4*: use shared clock configuration
2020-04-07 17:42:56 +02:00
Dylan Laduranty
a33e61e997
boards/stm32: update to use generic uart_hw_fc module
2020-03-10 14:34:11 +01:00
ef3b8b15e0
boards/p-l496g-cell02: fix typos
2019-11-23 22:39:35 +01:00
Yannick Gicquel
d37adee32d
boards/stm32-based: allow SPI signals routed on multiple alternate functions
...
There is no hardware limitation for custom boards based on STM32 to uses
SPI bus with signals coming from different PORT and alternate functions.
This patch allow alternate's function definition per pin basis, thus enable
the support of SPI bus signals routed on differents PORT.
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2019-10-25 06:27:41 +02:00
Alexandre Abadie
5dfe80d24c
boards/stm32: initialize board gpios after cpu
2019-10-04 17:05:40 +02:00
Gaëtan Harter
fc9f2a0f65
boards: remove duplicate include 'RIOTCPU/cpu/Makefile.features'
...
When 'CPU' is defined, the CPU Makefile.features is included by the
build system in the main Makefile.features.
No need to do it manually anymore.
2019-09-30 12:38:01 +02:00
Alexandre Abadie
f83e9788a6
boards/p-l496g-cell02: don't export CPU/CPU_MODEL variables
2019-09-29 15:54:11 +02:00
Alexandre Abadie
b77dd00142
boards/p-l496zg-cell02: move cpu define to Makefile.features
2019-09-20 13:46:58 +02:00
Alexandre Abadie
d1fef4803e
boards: add basic support for b-l496g-cell02
2019-08-09 08:26:17 +02:00
