If `register_interrupt` somehow fails, we leak the already created
POSIX timer by returning immediately.
Fix this by calling `timer_delete` before returning.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
When using `err`, no stacktrace is generated and the standard panic
functionallity of RIOT is sidestepped.
Use `core_panic` instead.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
In `timer_init`, `freq` is being check so its not unused.
In `timer_set_periodic`, `flags` is being used too.
Remove the uses of `(void)` in both cases.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Initial version to test 64 bit compatibility.
Instead of a separate board, the inital version for Linux/x86_64 is enabled
by setting the environment variable `NATIVE_64BIT=y` and compiling as usual.
Not currently implemented:
* Architectures other than x86_64 or operating systems other than Linux
* No FreeBSD support
* No Aarch support
* Rust support for x86_64
Add support for querying the frequency supported by
`periph_timer`. This allows applications which require
this feature to run on the `native` board.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Also use `CLOCK_MONOTONIC` for the timeouts, not just for
`timer_read()`. This fixes mismatches between when a timeout
occurs and what is expected in the context of the values returned by
`timer_read()`.
- point out behavior on denormalized time stamps
- use errno codes to indicate errors (and adapt the few instances of
actual error handling to use them)
19343: ztimer: add ztimer_stopwatch convenience functions r=benpicco a=benpicco
19349: cpu/native: Switch to ztimer for gettimeofday r=benpicco a=MrKevinWeiss
### Contribution description
A xtimer is somewhat taken over by ztimer this explicitly uses ztimer instead of relying on the compatibility layer.
### Testing procedure
`make all test -C tests/cpp11_mutex/`
and green murdock I guess.
### Issues/PRs references
19353: doc: add quicklink to boards in navbar r=benpicco a=OlegHahm
### Contribution description
Finding a list of supported boards and how to use them is an essential information. Currently this list is somewhat hidden under "Modules" which is not very intuitive. Hence, I propose to (at least) put a link in the side menu to this overview page.
### Testing procedure
1. Call `make doc`
2. Check the sidebar `${RIOT_BASE}/doc/doxygen/html/index.html` for an entry "Supported Boards"
19361: nanocoap_sock: ensure response address is the same as request address r=benpicco a=benpicco
19363: Fix stm32 timer periodic r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> cpu/stm32/periph/timer: remove unneeded header
>
> I see no reason this header should be included. It does not exist in
> RIOT's source tree. This patch removes the include.
and
> cpu/stm32/periph/timer: fix execution flow
>
> The implmentation of `timer_set_absolute()` has The following problems.
> First, it attempts to restore the auto reload register (ARR) to it's
> default if the ARR was previosly set by `timer_set_periodic()` by
> comparing it to the channel's capture compare (CC) register _after_ it
> has already set the CC register. Secondly, it clears spurious IRQs
> _after_ the CC register has been set. If the value being set is equal to
> the timer's current count (or the two become equal before the supurios
> IRQ clearing happens), this could cause a legitimate IRQ to be cleared.
>
> The implmentation of `timer_set()` has the same error in handling the
> ARR as described above.
>
> This patch reorders the operations of both functions to do:
>
> 1. handle ARR
> 2. clear spurious IRQs
> 3. set channel's CC
> 4. enable IRQ
>
> Additionally, the calulation of `value` in `timer_set()` is moved
> earlier in the function's exec path as a pedantic measure.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Oleg Hahm <oleg@hobbykeller.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
b4f29035ce6ee12949df1227ee463340ea8e8571 adapted the can_linux module to
the periph_can interface. This is a cleanup of some things that stayed
behind. Here the makefile is removed, the references to can_linux in the
dependency resolution and configuration Makefile are changed to the
standard periph_can, and the startup code is adapted.
Native CAN device was not properly ported to periph_can interface.
This commit fixes this by renaming all needed structures and files so
auto_init_can can initialize the native device. FEATURES_PROVIDED is
also updated for native.
