mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-12-17 10:33:49 +01:00
179 lines
6.5 KiB
C
179 lines
6.5 KiB
C
/*
|
|
* Copyright (C) 2025 Gunar Schorcht
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU Lesser
|
|
* General Public License v2.1. See the file LICENSE in the top level
|
|
* directory for more details.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/**
|
|
* @ingroup cpu_esp32
|
|
* @{
|
|
*
|
|
* @file
|
|
* @brief ESP32-H2 specific peripheral configuration
|
|
*
|
|
* @author Gunar Schorcht <gunar@schorcht.net>
|
|
*/
|
|
|
|
#include "sdkconfig.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Mapping configured ESP32-H2 default clock to CLOCK_CORECLOCK define */
|
|
#define CLOCK_CORECLOCK (1000000UL * CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ)
|
|
|
|
/**
|
|
* @brief CPU cycles per busy wait loop
|
|
*/
|
|
#define CPU_CYCLES_PER_LOOP (4)
|
|
|
|
/**
|
|
* @name Predefined GPIO names
|
|
* @{
|
|
*/
|
|
#define GPIO0 (GPIO_PIN(PORT_GPIO, 0)) /**< GPIO0 */
|
|
#define GPIO1 (GPIO_PIN(PORT_GPIO, 1)) /**< GPIO1 */
|
|
#define GPIO2 (GPIO_PIN(PORT_GPIO, 2)) /**< GPIO2 MTMS */
|
|
#define GPIO3 (GPIO_PIN(PORT_GPIO, 3)) /**< GPIO3 MTDO */
|
|
#define GPIO4 (GPIO_PIN(PORT_GPIO, 4)) /**< GPIO4 MTCK */
|
|
#define GPIO5 (GPIO_PIN(PORT_GPIO, 5)) /**< GPIO5 MTDI */
|
|
#define GPIO6 (GPIO_PIN(PORT_GPIO, 6)) /**< GPIO6 not broken out */
|
|
#define GPIO7 (GPIO_PIN(PORT_GPIO, 7)) /**< GPIO7 not broken out */
|
|
#define GPIO8 (GPIO_PIN(PORT_GPIO, 8)) /**< GPIO8 */
|
|
#define GPIO9 (GPIO_PIN(PORT_GPIO, 9)) /**< GPIO9 */
|
|
#define GPIO10 (GPIO_PIN(PORT_GPIO, 10)) /**< GPIO10 */
|
|
#define GPIO11 (GPIO_PIN(PORT_GPIO, 11)) /**< GPIO11 */
|
|
#define GPIO12 (GPIO_PIN(PORT_GPIO, 12)) /**< GPIO12 */
|
|
#define GPIO13 (GPIO_PIN(PORT_GPIO, 13)) /**< GPIO13 XTAL_32K_P */
|
|
#define GPIO14 (GPIO_PIN(PORT_GPIO, 14)) /**< GPIO14 XTAL_32K_N */
|
|
#define GPIO15 (GPIO_PIN(PORT_GPIO, 15)) /**< GPIO15 not broken out (internal flash) */
|
|
#define GPIO16 (GPIO_PIN(PORT_GPIO, 16)) /**< GPIO16 not broken out (internal flash) */
|
|
#define GPIO17 (GPIO_PIN(PORT_GPIO, 17)) /**< GPIO17 not broken out (internal flash) */
|
|
#define GPIO18 (GPIO_PIN(PORT_GPIO, 18)) /**< GPIO18 not broken out (internal flash) */
|
|
#define GPIO19 (GPIO_PIN(PORT_GPIO, 19)) /**< GPIO19 not broken out (internal flash) */
|
|
#define GPIO20 (GPIO_PIN(PORT_GPIO, 20)) /**< GPIO20 not broken out (internal flash) */
|
|
#define GPIO21 (GPIO_PIN(PORT_GPIO, 21)) /**< GPIO21 not broken out (internal flash) */
|
|
#define GPIO22 (GPIO_PIN(PORT_GPIO, 22)) /**< GPIO22 */
|
|
#define GPIO23 (GPIO_PIN(PORT_GPIO, 23)) /**< GPIO23 U0RXD */
|
|
#define GPIO24 (GPIO_PIN(PORT_GPIO, 24)) /**< GPIO24 U0TXD */
|
|
#define GPIO25 (GPIO_PIN(PORT_GPIO, 25)) /**< GPIO25 */
|
|
#define GPIO26 (GPIO_PIN(PORT_GPIO, 26)) /**< GPIO26 */
|
|
#define GPIO27 (GPIO_PIN(PORT_GPIO, 27)) /**< GPIO27 */
|
|
/** @} */
|
|
|
|
/**
|
|
* @name ADC configuration
|
|
*
|
|
* ESP32-H2 integrates one 12-bit ADC (ADC1) with 5 channels:
|
|
*
|
|
* GPIO01, GPIO2, GPIO3, GPIO4 and GPIO5
|
|
*
|
|
* The maximum number of ADC channels #ADC_NUMOF_MAX is 5.
|
|
*/
|
|
|
|
/**
|
|
* @name I2C configuration
|
|
*
|
|
* ESP32-H2 has one built-in I2C interfaces.
|
|
*
|
|
* The following table shows the default configuration of I2C interfaces
|
|
* used for ESP32-H2 boards. It can be overridden by
|
|
* [application-specific configurations](#esp32_application_specific_configurations).
|
|
*
|
|
* <center>
|
|
*
|
|
* Device | Signal | Pin | Symbol | Remarks
|
|
* :----------|:-------|:-------|:--------------|:----------------
|
|
* I2C_DEV(0) | | | `#I2C0_SPEED` | default is `I2C_SPEED_FAST`
|
|
* I2C_DEV(0) | SCL | GPIO10 | `#I2C0_SCL` | -
|
|
* I2C_DEV(0) | SDA | GPIO11 | `#I2C0_SDA` | -
|
|
*
|
|
* </center><br>
|
|
*/
|
|
|
|
/**
|
|
* @name PWM configuration
|
|
*
|
|
* The ESP32-H2 LEDC module has 1 channel group with 6 channels. Each of
|
|
* these channels can be clocked by one of the 4 timers. This means that
|
|
* it is possible to define up to 4 PWM devices with different frequencies
|
|
* and resolutions and a total of 6 PWM channels.
|
|
*/
|
|
|
|
/**
|
|
* @name SPI configuration
|
|
*
|
|
* ESP32-H2 has three SPI controllers where SPI0 and SPI1 share the same bus
|
|
* and can only operate in memory mode while SPI2 can be used as general
|
|
* purpose SPI:
|
|
*
|
|
* - controller SPI0 is reserved for external memories like flash and PSRAM
|
|
* - controller SPI1 is reserved for external memories like flash and PSRAM
|
|
* - controller SPI2 can be used for peripherals (also called FSPI)
|
|
*
|
|
* Thus, only SPI2 (FSPI) can be used as general purpose SPI in RIOT as
|
|
* SPI_DEV(0).
|
|
*
|
|
* The following table shows the pin configuration used by default, even
|
|
* though it **can vary** from board to board.
|
|
*
|
|
* <center>
|
|
*
|
|
* Device (Alias) | Signal | Pin | Symbol | Remarks
|
|
* :-----------------------|:------:|:-------|:-----------:|:-------------------
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPICS0 | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPICLK | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPID | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPIQ | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPIHD | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST0`/`SPI_HOST1` | SPIWP | - | - | reserved for Flash and PSRAM
|
|
* `SPI_HOST2` (`FSPI`) | SCK | GPIO4 |`#SPI0_SCK` | can be used
|
|
* `SPI_HOST2` (`FSPI`) | MOSI | GPIO5 |`#SPI0_MOSI` | can be used
|
|
* `SPI_HOST2` (`FSPI`) | MISO | GPIO0 |`#SPI0_MISO` | can be used
|
|
* `SPI_HOST2` (`FSPI`) | CS0 | GPIO1 |`#SPI0_CS0` | can be used
|
|
*
|
|
* </center><br>
|
|
*/
|
|
|
|
/**
|
|
* @name Timer configuration depending on which implementation is used
|
|
*
|
|
* ESP32-H2 has two timer groups with one channel each.
|
|
*/
|
|
|
|
#ifdef MODULE_ESP_HW_COUNTER
|
|
# error "Counter based timers are not supported by ESP32-H2"
|
|
#endif
|
|
|
|
/**
|
|
* @name UART configuration
|
|
*
|
|
* ESP32-H2 integrates two UART interfaces. The following default pin
|
|
* configuration of UART interfaces as used by a most boards can be overridden
|
|
* by the application, see section [Application-Specific Configurations]
|
|
* (#esp32_application_specific_configurations).
|
|
*
|
|
* <center>
|
|
*
|
|
* Device |Signal|Pin |Symbol |Remarks
|
|
* :-----------|:-----|:-------|:-----------|:----------------
|
|
* UART_DEV(0) | TxD | GPIO24 |`#UART0_TXD`| cannot be changed
|
|
* UART_DEV(0) | RxD | GPIO23 |`#UART0_RXD`| cannot be changed
|
|
* UART_DEV(1) | TxD | - |`#UART1_TXD`| optional, can be overridden (no direct I/O)
|
|
* UART_DEV(1) | RxD | - |`#UART1_RXD`| optional, can be overridden (no direct I/O)
|
|
*
|
|
* </center><br>
|
|
*
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/** @} */
|