riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge pull request #13395 from smlng/pr_doc_phynode

Browse Source 
boards: update doc of phyNode (pba-d-01-kw2x)
This commit is contained in:
MichelRottleuthner 2020-02-18 11:56:02 +01:00 committed by GitHub
commit 098c3ef3e1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 47 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
boards/pba-d-01-kw2x/doc.txt
View File

@ -9,17 +9,15 @@ Designed and produced by PHYTEC Messtechnik GmbH, D-55129 Mainz.
contact@phytec.de contact@phytec.de
## Overview ## Overview
The [Phytec IoT wiki](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki)
describes the phyWAVE module and the phyNODE board more The phyNODE evaluation board consists of a [phyWAVE](https://www.phytec.de/produkte/internet-of-things/phywave/)
detailed. The links below will guide you directly to the corresponding chapter: module mounted on a common PCB with several sensor and actuator modules.
* [Overview](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/) The board provides 2 USB ports. The one next to the white imprint *cmsis-dap*
* [Introduction](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Introduction) is meant for development (debug and flash). The second one, next to the golden
* Hardware descriptions for the *PHYTEC* imprint, is connected to the USB peripheral of the MCU and may be used
[phyWAVE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyWAVE-KW2x-Characteristics) by a firmware (currently not supported).
and the
[phyNODE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyNODE-Characteristics)
* [Toolchain, build and debug Information](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#toolchain-summary)
* [A detailed step-by-step Guide that explains how to set up the Environment](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#step-by-step-installation-guide)
The implementation status of the phyWAVE and phyNODE peripherals are listed The implementation status of the phyWAVE and phyNODE peripherals are listed
below. You can find links to the corresponding Pull Requests which may give you below. You can find links to the corresponding Pull Requests which may give you
a code reference. a code reference.
@ -27,11 +25,44 @@ a code reference.
<img src="https://raw.githubusercontent.com/jremmert-phytec-iot/Pictures_Phytec_IOT/master/EvalBoard_3.png" width="800" /> <img src="https://raw.githubusercontent.com/jremmert-phytec-iot/Pictures_Phytec_IOT/master/EvalBoard_3.png" width="800" />
phyNODE board with equipped phyWAVE-KW2x processor/radio-module. phyNODE board with equipped phyWAVE-KW2x processor/radio-module.
### Details @note The PCB-pieces with the mounted sensors can be separated from the
The PCB-pieces with the mounted sensors can be separated from the evaluation evaluation board to capture sensor values from specific spatial points.
board to capture sensor values from specific spatial points.
[Pinout reference](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Interfaces) ## Pinout Reference
The board features an Arduino like header connector to mount shields. The
spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly.
The pinout below shows the vendor specific naming and functionality.
The actual pin configuration of the board for RIOT can be found in
[periph_conf.h](https://github.com/RIOT-OS/RIOT/blob/master/boards/pba-d-01-kw2x/include/periph_conf.h).
@note Not all signals and pins are compatible with Arduino Uno R3.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_X1____________________
| D15 |___DIO21, PE19, I2C0 SCL
| D14 |___DIO20, PE18, I2C0 SDA
| AREF |___AREF, VCC3V3
| GND3 |___GND
X___| RESERVED D13 |___DIO3, PC5, SPI0 SCK
VCC3V3___| IOREF D12 |___DIO5, PC7, SPI0 MISO
nRESET___| RST TGTMCU D11 |___DIO4, PC6, SPI0 MOSI
VCC3V3___| P3V3 D10 |___DIO2, PC4, SPI0 CS0
P5V USB OUT___| P5V USB D9 |___DIO9, PD4, PWM
GND_________| GND2 D8 |___DIO6, PD1
\___| GND1 |
X___| P5_9V VIN D7 |___DIO24, PA1, PWM, TDI2
| D6 |___DIO25, PA2, PWM, TDO2
DIO15, PE2, ADC ___| A0 D5 |___DIO11, PD6, PWM
DIO16, PE3, ADC, TDO1 ___| A1 D4 |___DIO29, PA19, TCLKIN
DIO12, PD7, ADC ___| A2 D3 |___DIO27, PA4, PWM
DIO10, PD5, ADC ___| A3 D2 |___DIO17, PE4, LLWU, TDI1
DIO13, PE0, ADC, I2CSDA ___| A4 D1 |___DIO8, PD3, UART2 TX
DIO14, PE1, ADC, I2CSCL ___| A5 D0 |___DIO7, PD2, UART2 RX
-----------------------
Arduino Uno R3 Connector
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
## Implementation Status ## Implementation Status
@ -55,5 +86,5 @@ board to capture sensor values from specific spatial points.
| Magnetometer | [MAG3110FCR1](http://www.nxp.com/products/sensors/magnetometers/sample-data-sets-for-inertial-and-magnetic-sensors/freescale-high-accuracy-3d-magnetometer:MAG3110) | yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/2121) | | Magnetometer | [MAG3110FCR1](http://www.nxp.com/products/sensors/magnetometers/sample-data-sets-for-inertial-and-magnetic-sensors/freescale-high-accuracy-3d-magnetometer:MAG3110) | yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/2121) |
| Light Sensor | [TCS3772](https://ams.com/jpn/content/download/291143/1065677/file/TCS3772_Datasheet_EN_v1.pdf) | yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/3135) | | Light Sensor | [TCS3772](https://ams.com/jpn/content/download/291143/1065677/file/TCS3772_Datasheet_EN_v1.pdf) | yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/3135) |
| IR-Termopile Sensor | [TMP006](http://www.ti.com/product/TMP006) |yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/2148) | | IR-Termopile Sensor | [TMP006](http://www.ti.com/product/TMP006) |yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/2148) |
| Capacitive Button | PCB | no | planned | | Capacitive Button | PCB | yes | [mainline](https://github.com/RIOT-OS/RIOT/pull/7147) |
*/ */