diff --git a/boards/nucleo-f303k8/Kconfig b/boards/nucleo-f303k8/Kconfig
index 467e71339a..fbaa248d1b 100644
--- a/boards/nucleo-f303k8/Kconfig
+++ b/boards/nucleo-f303k8/Kconfig
@@ -15,6 +15,7 @@ config BOARD_NUCLEO_F303K8
     select CPU_MODEL_STM32F303K8
 
     # Put defined MCU peripherals here (in alphabetical order)
+    select HAS_PERIPH_DMA
     select HAS_PERIPH_PWM
     select HAS_PERIPH_RTC
     select HAS_PERIPH_SPI
diff --git a/boards/nucleo-f303k8/Makefile.features b/boards/nucleo-f303k8/Makefile.features
index 6cdd370e42..69a32f11c7 100644
--- a/boards/nucleo-f303k8/Makefile.features
+++ b/boards/nucleo-f303k8/Makefile.features
@@ -2,6 +2,7 @@ CPU = stm32
 CPU_MODEL = stm32f303k8
 
 # Put defined MCU peripherals here (in alphabetical order)
+FEATURES_PROVIDED += periph_dma
 FEATURES_PROVIDED += periph_pwm
 FEATURES_PROVIDED += periph_rtc
 FEATURES_PROVIDED += periph_spi
diff --git a/boards/nucleo-f303k8/include/periph_conf.h b/boards/nucleo-f303k8/include/periph_conf.h
index 81dcb57abc..a3cdb158a0 100644
--- a/boards/nucleo-f303k8/include/periph_conf.h
+++ b/boards/nucleo-f303k8/include/periph_conf.h
@@ -55,6 +55,25 @@ extern "C" {
 #define CLOCK_PLL_MUL        (16)
 /** @} */
 
+/**
+ * @name    DMA streams configuration
+ * @{
+ */
+static const dma_conf_t dma_config[] = {
+    { .stream = 1 },    /* DMA1 Channel 2 - SPI1_RX */
+    { .stream = 2 },    /* DMA1 Channel 3 - SPI1_TX */
+    { .stream = 3 },    /* DMA1 Channel 4 - USART1_TX */
+    { .stream = 6 },    /* DMA1 Channel 7 - USART2_TX */
+};
+
+#define DMA_0_ISR   isr_dma1_channel2
+#define DMA_1_ISR   isr_dma1_channel3
+#define DMA_2_ISR   isr_dma1_channel4
+#define DMA_3_ISR   isr_dma1_channel7
+
+#define DMA_NUMOF           ARRAY_SIZE(dma_config)
+/** @} */
+
 /**
  * @name   UART configuration
  * @{
@@ -68,7 +87,11 @@ static const uart_conf_t uart_config[] = {
         .rx_af      = GPIO_AF7,
         .tx_af      = GPIO_AF7,
         .bus        = APB1,
-        .irqn       = USART2_IRQn
+        .irqn       = USART2_IRQn,
+#ifdef MODULE_PERIPH_DMA
+        .dma        = 3,
+        .dma_chan   = DMA_CHAN_CONFIG_UNSUPPORTED
+#endif
     },
     {
         .dev        = USART1,
@@ -78,7 +101,11 @@ static const uart_conf_t uart_config[] = {
         .rx_af      = GPIO_AF7,
         .tx_af      = GPIO_AF7,
         .bus        = APB2,
-        .irqn       = USART1_IRQn
+        .irqn       = USART1_IRQn,
+#ifdef MODULE_PERIPH_DMA
+        .dma        = 2,
+        .dma_chan   = DMA_CHAN_CONFIG_UNSUPPORTED
+#endif
     }
 };
 
@@ -129,12 +156,18 @@ static const spi_conf_t spi_config[] = {
         .miso_pin = GPIO_PIN(PORT_B, 4),
         .sclk_pin = GPIO_PIN(PORT_B, 3),
         .cs_pin   = GPIO_UNDEF,
-        .mosi_af  = GPIO_AF0,
-        .miso_af  = GPIO_AF0,
-        .sclk_af  = GPIO_AF0,
-        .cs_af    = GPIO_AF0,
+        .mosi_af  = GPIO_AF5,
+        .miso_af  = GPIO_AF5,
+        .sclk_af  = GPIO_AF5,
+        .cs_af    = GPIO_AF5,
         .rccmask  = RCC_APB2ENR_SPI1EN,
-        .apbbus   = APB2
+        .apbbus   = APB2,
+#ifdef MODULE_PERIPH_DMA
+        .tx_dma   = 1,
+        .tx_dma_chan = DMA_CHAN_CONFIG_UNSUPPORTED,
+        .rx_dma   = 0,
+        .rx_dma_chan = DMA_CHAN_CONFIG_UNSUPPORTED
+#endif
     }
 };