From 43a475fef8e28c4c0c624c175d0c788f5afc41da Mon Sep 17 00:00:00 2001
From: Francois Berder <18538310+francois-berder@users.noreply.github.com>
Date: Thu, 13 Feb 2020 19:32:50 +0000
Subject: [PATCH] boards: nucleo-f030r8: Cleanup documentation

Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
---
 boards/nucleo-f030r8/doc.txt | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/boards/nucleo-f030r8/doc.txt b/boards/nucleo-f030r8/doc.txt
index a8f5369d00..4050918b3e 100644
--- a/boards/nucleo-f030r8/doc.txt
+++ b/boards/nucleo-f030r8/doc.txt
@@ -5,34 +5,34 @@
 
 ## Overview
 
-The Nucleo-F030 is a board from ST's Nucleo family supporting a ARM Cortex-M0
+The Nucleo-F030R8 is a board from ST's Nucleo family supporting a ARM Cortex-M0
 STM32F030R8 microcontroller with 8Kb of SRAM and 64Kb of ROM Flash.
 
 ## Hardware
 
-![Nucleo64 F030](http://www.open-electronics.org/wp-
+![Nucleo64 F030R8](http://www.open-electronics.org/wp-
 content/uploads/2015/08/Figura2-500x467.png)
 
 
 
 ### MCU
 | MCU        | STM32F030R8       |
-|:------------- |:--------------------- |
-| Family | ARM Cortex-M0     |
-| Vendor | ST Microelectronics   |
-| RAM        | 8Kb |
+|:---------- |:----------------- |
+| Family     | ARM Cortex-M0     |
+| Vendor     | ST Microelectronics |
+| RAM        | 8Kb               |
 | Flash      | 64Kb              |
-| Frequency  | up to 48MHz) |
+| Frequency  | up to 48MHz       |
 | FPU        | no                |
-| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit)    |
+| Timers     | 10 (2x watchdog, 1 SysTick, 7x 16-bit)    |
 | ADCs       | 1x 12-bit         |
-| UARTs      | 6                 |
+| UARTs      | 2                 |
 | SPIs       | 2                 |
 | I2Cs       | 2                 |
 | RTC        | 1                 |
-| Vcc        | 2.0V - 3.6V           |
-| Datasheet  | [Datasheet](http://www.st.com/en/evaluation-tools/nucleo-f030r8.html) |
-| Reference Manual | [Reference Manual](http://www.st.com/resource/en/datasheet/stm32f030r8.pdf) |
+| Vcc        | 2.4V - 3.6V       |
+| Datasheet  | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f030r8.pdf) |
+| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) |
 | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) |
 | Board Manual   | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)|
 
@@ -53,22 +53,22 @@ content/uploads/2015/08/Figura2-500x467.png)
 
 
 ## Flashing the device
-The ST Nucleo-F030 board includes an on-board ST-LINK V2 programmer. The
+The ST Nucleo-F030R8 board includes an on-board ST-LINK V2 programmer. The
 easiest way to program the board is to use OpenOCD. Once you have installed
 OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for
 installation instructions), you can flash the board simply by typing
 
 ```
-make BOARD=nucleo-f030 flash
+make BOARD=nucleo-f030r8 flash
 ```
 and debug via GDB by simply typing
 ```
-make BOARD=nucleo-f030 debug
+make BOARD=nucleo-f030r8 debug
 ```
 
 
 ## Supported Toolchains
-For using the ST Nucleo-F030 board we strongly recommend the usage of the
+For using the ST Nucleo-F030R8 board we strongly recommend the usage of the
 [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded)
 toolchain.
  */