riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

examples/gnrc_border_router: add commented lines for SLIP

Browse Source
This commit is contained in:
kYc0o 2017-04-25 19:45:21 +02:00
parent 0cc15955f6
commit 4880ea3cc6
2 changed files with 21 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
examples/gnrc_border_router/Makefile
View File

@ -29,6 +29,25 @@ CFLAGS += '-DETHOS_UART=UART_DEV(0)' -DETHOS_BAUDRATE=$(ETHOS_BAUDRATE) -DUSE_ET
FEATURES_REQUIRED += periph_uart
endif
# SLIP legacy compatibility
# Uncomment the lines below if you want to use SLIP with this example and don't
# forget to comment the lines above for ethos.
#ifeq (,$(SLIP_UART))
# set default (last available UART)
#SLIP_UART="UART_DEV(UART_NUMOF-1)"
#endif
#ifeq (,$(SLIP_BAUDRATE))
# set default
#SLIP_BAUDRATE=115200
#endif
#GNRC_NETIF_NUMOF := 2
#INCLUDES += -I$(CURDIR)
#CFLAGS += -DSLIP_UART=$(SLIP_UART)
#CFLAGS += -DSLIP_BAUDRATE=$(SLIP_BAUDRATE)
# Include SLIP package for IP over Serial communication
#USEMODULE += gnrc_slip
# Include packages that pull up and auto-init the link layer.
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
USEMODULE += gnrc_netdev_default

4
examples/gnrc_border_router/README.md
View File

@ -181,7 +181,7 @@ example on any RIOT supported platform that offers either more than one UART or
be equipped with an IPv6 capable network device. In this case only the Makefile
of this application has to be slightly modified, e.g. by replacing the line
```
USEMODULE += gnrc_slip
USEMODULE += ethos gnrc_netdev
```
with something like
```
@ -217,7 +217,7 @@ USEMODULE += gnrc_slip
## Configuration
In order to connect a RIOT 6LoWPAN border router over SLIP you run a small
program called tunslip (imported from Contiki) [2] on the Linux host. The
program called tunslip6 (imported from Contiki) [2] on the Linux host. The
program can be found in the `dist/tools/tunslip` folder and has to be compiled
before first use (simple calling `make` should be enough). Now, one can start
the program by calling something like: