diff --git a/boards/nucleo-f446ze/doc.txt b/boards/nucleo-f446ze/doc.txt
index 22d169e6a0..87ca49cbdf 100644
--- a/boards/nucleo-f446ze/doc.txt
+++ b/boards/nucleo-f446ze/doc.txt
@@ -5,41 +5,42 @@
 
 ## Overview
 
-The Nucleo-F446 is a board from ST's Nucleo family supporting a ARM Cortex-M4
-STM32F446RE microcontroller with 128Kb of RAM and 512Kb of ROM Flash.
+The Nucleo-F446ZE is a board from ST's Nucleo family supporting a ARM Cortex-M4
+STM32F446ZE microcontroller with 128Kb of RAM and 512Kb of ROM Flash.
 
 ## Hardware
 
-![Nucleo64 F446](http://www.open-electronics.org/wp-
-content/uploads/2015/08/Figura2-500x467.png)
+![Nucleo144 F446ZE](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png)
 
 ### MCU
 
-| MCU        | STM32F446RE       |
-|:------------- |:--------------------- |
-| Family | ARM Cortex-M4     |
-| Vendor | ST Microelectronics   |
-| RAM        | 128Kb |
+| MCU        | STM32F446ZE       |
+|:---------- |:----------------- |
+| Family     | ARM Cortex-M4     |
+| Vendor     | ST Microelectronics |
+| RAM        | 128Kb             |
 | Flash      | 512Kb             |
-| Frequency  | up to 180MHz |
+| Frequency  | up to 180MHz      |
 | FPU        | yes               |
-| Timers | 11 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) |
-| ADCs       | 3x 12-bit         |
-| UARTs      | 4                 |
+| Timers     | 17 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) |
+| ADCs       | 3x 12-bit (24 channels) |
+| UARTs      | 6                 |
 | SPIs       | 4                 |
 | I2Cs       | 4                 |
 | RTC        | 1                 |
-| Vcc        | 2.0V - 3.6V           |
-| Datasheet  | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f446re.pdf) |
-| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) |
-| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) |
-| Board Manual   | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)|
+| CAN        | 2                 |
+| USB        | 1                 |
+| Vcc        | 1.8V - 3.6V       |
+| Datasheet  | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f446ze.pdf) |
+| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00135183.pdf) |
+| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/dm00046982.pdf) |
+| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518.pdf)|
 
 ## Implementation Status
 
 | Device | ID        | Supported | Comments  |
 |:------------- |:------------- |:------------- |:------------- |
-| MCU        | STM32F446RE   | partly    | Energy saving modes not fully utilized |
+| MCU        | STM32F446ZE   | partly    | Energy saving modes not fully utilized |
 | Low-level driver | GPIO    | yes       | |
 |        | PWM       | yes (9 pins available)    |  |
 |        | UART      | 3 UARTs       | USART2 via STLink/USB or D0(RX)/D1(TX), USART3 on PC11(RX)/PC10(TX) and USART1 on PA10(RX)/PA9(TX) |
@@ -50,22 +51,22 @@ content/uploads/2015/08/Figura2-500x467.png)
 
 ## Flashing the device
 
-The ST Nucleo-F446RE board includes an on-board ST-LINK V2 programmer. The
+The ST Nucleo-F446ZE board includes an on-board ST-LINK V2 programmer. The
 easiest way to program the board is to use OpenOCD. Once you have installed
 OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for
 installation instructions), you can flash the board simply by typing
 
 ```
-make BOARD=nucleo-f446 flash
+make BOARD=nucleo-f446ze flash
 ```
 and debug via GDB by simply typing
 ```
-make BOARD=nucleo-f446 debug
+make BOARD=nucleo-f446ze debug
 ```
 
 ## Supported Toolchains
 
-For using the ST Nucleo-F446RE board we strongly recommend the usage of the
+For using the ST Nucleo-F446ZE board we strongly recommend the usage of the
 [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-
 embedded)
 toolchain.