riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

boards: update links in doc of pba-d-01-kw2x

Browse Source
This commit is contained in:
Sebastian Meiling 2020-02-18 09:54:59 +01:00
parent a9cb3b637f
commit 867090c579
1 changed files with 12 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
boards/pba-d-01-kw2x/doc.txt
View File

@ -9,17 +9,15 @@ Designed and produced by PHYTEC Messtechnik GmbH, D-55129 Mainz.
contact@phytec.de contact@phytec.de
## Overview ## Overview
The [Phytec IoT wiki](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki)
describes the phyWAVE module and the phyNODE board more The phyNODE evaluation board consists of a [phyWAVE](https://www.phytec.de/produkte/internet-of-things/phywave/)
detailed. The links below will guide you directly to the corresponding chapter: module mounted on a common PCB with several sensor and actuator modules.
* [Overview](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/) The board provides 2 USB ports. The one next to the white imprint *cmsis-dap*
* [Introduction](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Introduction) is meant for development (debug and flash). The second one, next to the golden
* Hardware descriptions for the *PHYTEC* imprint, is connected to the USB peripheral of the MCU and may be used
[phyWAVE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyWAVE-KW2x-Characteristics) by a firmware (currently not supported).
and the
[phyNODE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyNODE-Characteristics)
* [Toolchain, build and debug Information](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#toolchain-summary)
* [A detailed step-by-step Guide that explains how to set up the Environment](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#step-by-step-installation-guide)
The implementation status of the phyWAVE and phyNODE peripherals are listed The implementation status of the phyWAVE and phyNODE peripherals are listed
below. You can find links to the corresponding Pull Requests which may give you below. You can find links to the corresponding Pull Requests which may give you
a code reference. a code reference.
@ -27,11 +25,10 @@ a code reference.
<img src="https://raw.githubusercontent.com/jremmert-phytec-iot/Pictures_Phytec_IOT/master/EvalBoard_3.png" width="800" /> <img src="https://raw.githubusercontent.com/jremmert-phytec-iot/Pictures_Phytec_IOT/master/EvalBoard_3.png" width="800" />
phyNODE board with equipped phyWAVE-KW2x processor/radio-module. phyNODE board with equipped phyWAVE-KW2x processor/radio-module.
### Details @note The PCB-pieces with the mounted sensors can be separated from the
The PCB-pieces with the mounted sensors can be separated from the evaluation evaluation board to capture sensor values from specific spatial points.
board to capture sensor values from specific spatial points.
### Pinout Reference ## Pinout Reference
The board features an Arduino like header connector to mount shields. The The board features an Arduino like header connector to mount shields. The
spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly. spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly.