net/lorawan : Expose to Kconfig
This commit is contained in:
Akshai M
parent
ae1c8497f2
commit
9600ebf536
@ -34,6 +34,10 @@ config MODULE_RN2XX3
|
|||||||
|
|
||||||
endif # TEST_KCONFIG
|
endif # TEST_KCONFIG
|
||||||
|
|
||||||
|
config USEMODULE_RN2XX3
|
||||||
|
bool
|
||||||
|
select HAVE_LORAWAN
|
||||||
|
|
||||||
menuconfig KCONFIG_USEMODULE_RN2XX3
|
menuconfig KCONFIG_USEMODULE_RN2XX3
|
||||||
bool "Configure RN2XX3 driver"
|
bool "Configure RN2XX3 driver"
|
||||||
depends on USEMODULE_RN2XX3
|
depends on USEMODULE_RN2XX3
|
||||||
|
|||||||
@ -20,36 +20,47 @@ DRIVER ?= sx1276
|
|||||||
|
|
||||||
USEMODULE += $(DRIVER)
|
USEMODULE += $(DRIVER)
|
||||||
|
|
||||||
|
include $(RIOTBASE)/Makefile.include
|
||||||
|
|
||||||
########################### COMPILE TIME CONFIGURATION ########################
|
########################### COMPILE TIME CONFIGURATION ########################
|
||||||
# NOTE: The following options can be configured on runtime as well using
|
# NOTE: The following options can be configured on runtime as well using
|
||||||
# `ifconfig`
|
# `ifconfig`
|
||||||
|
|
||||||
|
# The configurations can be accessed via menuconfig using `make menuconfig`
|
||||||
|
|
||||||
# OTAA compile time configuration keys
|
# OTAA compile time configuration keys
|
||||||
CFLAGS += -DCONFIG_LORAMAC_APP_KEY_DEFAULT=\"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA\"
|
|
||||||
CFLAGS += -DCONFIG_LORAMAC_APP_EUI_DEFAULT=\"BBBBBBBBBBBBBBBB\"
|
|
||||||
CFLAGS += -DCONFIG_LORAMAC_DEV_EUI_DEFAULT=\"CCCCCCCCCCCCCCCC\"
|
|
||||||
|
|
||||||
# Uncomment and replace with proper keys for joining with ABP
|
# Check if being configured via Kconfig
|
||||||
# For TTN, It's necessary to set the RX2 DR to 3
|
ifndef CONFIG_KCONFIG_USEMODULE_LORAWAN
|
||||||
# NOTE: This values will be overriten in case of OTAA.
|
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_DEV_ADDR_DEFAULT=\"00000000\"
|
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_NWK_SKEY_DEFAULT=\"00000000000000000000000000000000\"
|
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_APP_SKEY_DEFAULT=\"00000000000000000000000000000000\"
|
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_DEFAULT_RX2_DR=LORAMAC_DR_3
|
|
||||||
|
|
||||||
# Comment/uncomment as necessary
|
CFLAGS += -DCONFIG_LORAMAC_APP_KEY_DEFAULT=\"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA\"
|
||||||
CFLAGS += -DCONFIG_LORAMAC_DEFAULT_JOIN_PROCEDURE=LORAMAC_JOIN_OTAA
|
CFLAGS += -DCONFIG_LORAMAC_APP_EUI_DEFAULT=\"BBBBBBBBBBBBBBBB\"
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_DEFAULT_JOIN_PROCEDURE=LORAMAC_JOIN_ABP
|
CFLAGS += -DCONFIG_LORAMAC_DEV_EUI_DEFAULT=\"CCCCCCCCCCCCCCCC\"
|
||||||
|
|
||||||
# Uncomment to set the highest DR for the EU868 in order to maximize throughput.
|
# For TTN, It's necessary to set the RX2 DR to 3 in EU_868 region
|
||||||
# If uncommented, the default value (DR0) is used.
|
# CFLAGS += -DCONFIG_LORAMAC_DEFAULT_RX2_DR_3
|
||||||
# Note this value is also used for the OTAA.
|
|
||||||
#CFLAGS += -DCONFIG_LORAMAC_DEFAULT_DR=LORAMAC_DR_5
|
|
||||||
|
|
||||||
# Set default messages to unconfirmable
|
# Comment/uncomment as necessary
|
||||||
CFLAGS += -DCONFIG_LORAMAC_DEFAULT_TX_MODE=LORAMAC_TX_UNCNF
|
CFLAGS += -DCONFIG_LORAMAC_DEFAULT_JOIN_PROCEDURE_OTAA
|
||||||
|
# CFLAGS += -DCONFIG_LORAMAC_DEFAULT_JOIN_PROCEDURE_ABP
|
||||||
|
|
||||||
include $(RIOTBASE)/Makefile.include
|
# Uncomment and replace with proper keys for joining with ABP
|
||||||
|
# NOTE: This values will be overriten in case of OTAA.
|
||||||
|
# CFLAGS += -DCONFIG_LORAMAC_DEV_ADDR_DEFAULT=\"00000000\"
|
||||||
|
# CFLAGS += -DCONFIG_LORAMAC_NWK_SKEY_DEFAULT=\"00000000000000000000000000000000\"
|
||||||
|
# CFLAGS += -DCONFIG_LORAMAC_APP_SKEY_DEFAULT=\"00000000000000000000000000000000\"
|
||||||
|
|
||||||
|
## For FIT-IoT Lab usage. Use the highest DR since gateway is nearby.
|
||||||
|
# If uncommented, the default value (DR0) is used.
|
||||||
|
# Note this value is also used for the OTAA.
|
||||||
|
# CFLAGS += -DCONFIG_LORAMAC_DEFAULT_DR_5
|
||||||
|
|
||||||
|
# # Set default messages to unconfirmable
|
||||||
|
CFLAGS += -DCONFIG_LORAMAC_DEFAULT_TX_MODE_UNCNF
|
||||||
|
|
||||||
|
# Set region
|
||||||
|
CFLAGS += -DCONFIG_LORAMAC_REGION_EU_868
|
||||||
|
endif
|
||||||
|
|
||||||
# We can reduce the size of the packet buffer for LoRaWAN, since there's no IP
|
# We can reduce the size of the packet buffer for LoRaWAN, since there's no IP
|
||||||
# support. This will reduce RAM consumption.
|
# support. This will reduce RAM consumption.
|
||||||
@ -57,8 +68,3 @@ include $(RIOTBASE)/Makefile.include
|
|||||||
ifndef CONFIG_GNRC_PKTBUF_SIZE
|
ifndef CONFIG_GNRC_PKTBUF_SIZE
|
||||||
CFLAGS += -DCONFIG_GNRC_PKTBUF_SIZE=512
|
CFLAGS += -DCONFIG_GNRC_PKTBUF_SIZE=512
|
||||||
endif
|
endif
|
||||||
|
|
||||||
# Set region
|
|
||||||
ifeq (,$(CONFIG_LORAMAC_REGION_EU_868)$(CONFIG_LORAMAC_REGION_IN_865))
|
|
||||||
CFLAGS += -DCONFIG_LORAMAC_REGION_EU_868=1
|
|
||||||
endif
|
|
||||||
|
|||||||
@ -46,14 +46,9 @@ endif
|
|||||||
|
|
||||||
include $(RIOTBASE)/Makefile.include
|
include $(RIOTBASE)/Makefile.include
|
||||||
|
|
||||||
# OTAA compile time configuration keys
|
ifndef CONFIG_KCONFIG_USEMODULE_LORAWAN
|
||||||
ifeq (,$(CONFIG_LORAMAC_APP_KEY_DEFAULT)$(CONFIG_LORAMAC_APP_EUI_DEFAULT)$(CONFIG_LORAMAC_DEV_EUI_DEFAULT))
|
# OTAA compile time configuration keys
|
||||||
CFLAGS += -DCONFIG_LORAMAC_APP_KEY_DEFAULT=\"$(APPKEY)\"
|
CFLAGS += -DCONFIG_LORAMAC_APP_KEY_DEFAULT=\"$(APPKEY)\"
|
||||||
CFLAGS += -DCONFIG_LORAMAC_APP_EUI_DEFAULT=\"$(APPEUI)\"
|
CFLAGS += -DCONFIG_LORAMAC_APP_EUI_DEFAULT=\"$(APPEUI)\"
|
||||||
CFLAGS += -DCONFIG_LORAMAC_DEV_EUI_DEFAULT=\"$(DEVEUI)\"
|
CFLAGS += -DCONFIG_LORAMAC_DEV_EUI_DEFAULT=\"$(DEVEUI)\"
|
||||||
endif
|
|
||||||
|
|
||||||
# Set network as public
|
|
||||||
ifndef CONFIG_LORAMAC_DEFAULT_PUBLIC_NETWORK
|
|
||||||
CFLAGS += -DCONFIG_LORAMAC_DEFAULT_PUBLIC_NETWORK=1
|
|
||||||
endif
|
endif
|
||||||
|
|||||||
@ -7,6 +7,7 @@
|
|||||||
menu "Packages"
|
menu "Packages"
|
||||||
|
|
||||||
rsource "driver_bme680/Kconfig"
|
rsource "driver_bme680/Kconfig"
|
||||||
|
rsource "semtech-loramac/Kconfig"
|
||||||
rsource "tinydtls/Kconfig"
|
rsource "tinydtls/Kconfig"
|
||||||
rsource "wakaama/Kconfig"
|
rsource "wakaama/Kconfig"
|
||||||
|
|
||||||
|
|||||||
9
pkg/semtech-loramac/Kconfig
Normal file
9
pkg/semtech-loramac/Kconfig
Normal file
@ -0,0 +1,9 @@
|
|||||||
|
# Copyright (c) 2020 Freie Universitaet Berlin
|
||||||
|
#
|
||||||
|
# This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
# General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
# directory for more details.
|
||||||
|
#
|
||||||
|
config USEPKG_SEMTECH_LORAMAC
|
||||||
|
bool
|
||||||
|
select HAVE_LORAWAN
|
||||||
@ -4,6 +4,10 @@
|
|||||||
# General Public License v2.1. See the file LICENSE in the top level
|
# General Public License v2.1. See the file LICENSE in the top level
|
||||||
# directory for more details.
|
# directory for more details.
|
||||||
#
|
#
|
||||||
|
config USEMODULE_GNRC_LORAWAN
|
||||||
|
bool
|
||||||
|
select HAVE_LORAWAN
|
||||||
|
|
||||||
menuconfig KCONFIG_USEMODULE_GNRC_LORAWAN
|
menuconfig KCONFIG_USEMODULE_GNRC_LORAWAN
|
||||||
bool "Configure GNRC LoRaWAN"
|
bool "Configure GNRC LoRaWAN"
|
||||||
depends on USEMODULE_GNRC_LORAWAN
|
depends on USEMODULE_GNRC_LORAWAN
|
||||||
@ -12,20 +16,6 @@ menuconfig KCONFIG_USEMODULE_GNRC_LORAWAN
|
|||||||
|
|
||||||
if KCONFIG_USEMODULE_GNRC_LORAWAN
|
if KCONFIG_USEMODULE_GNRC_LORAWAN
|
||||||
|
|
||||||
choice
|
|
||||||
bool "LoRaWAN region"
|
|
||||||
default LORAMAC_REGION_EU_868
|
|
||||||
help
|
|
||||||
Configure the LoRaWAN region.
|
|
||||||
|
|
||||||
config LORAMAC_REGION_EU_868
|
|
||||||
bool "EU863-870"
|
|
||||||
|
|
||||||
config LORAMAC_REGION_IN_865
|
|
||||||
bool "IN865-867"
|
|
||||||
|
|
||||||
endchoice
|
|
||||||
|
|
||||||
config GNRC_LORAWAN_TIMER_DRIFT
|
config GNRC_LORAWAN_TIMER_DRIFT
|
||||||
int "Maximum timer drift"
|
int "Maximum timer drift"
|
||||||
default 10
|
default 10
|
||||||
|
|||||||
@ -7,3 +7,4 @@
|
|||||||
rsource "csma_sender/Kconfig"
|
rsource "csma_sender/Kconfig"
|
||||||
rsource "ieee802154/Kconfig"
|
rsource "ieee802154/Kconfig"
|
||||||
rsource "l2filter/Kconfig"
|
rsource "l2filter/Kconfig"
|
||||||
|
rsource "Kconfig.lorawan"
|
||||||
|
|||||||
527
sys/net/link_layer/Kconfig.lorawan
Normal file
527
sys/net/link_layer/Kconfig.lorawan
Normal file
@ -0,0 +1,527 @@
|
|||||||
|
# Copyright (c) 2020 Freie Universitaet Berlin
|
||||||
|
#
|
||||||
|
# This file is subject to the terms and conditions of the GNU Lesser
|
||||||
|
# General Public License v2.1. See the file LICENSE in the top level
|
||||||
|
# directory for more details.
|
||||||
|
#
|
||||||
|
config HAVE_LORAWAN
|
||||||
|
bool
|
||||||
|
help
|
||||||
|
Indicates that LoRaWAN support is present.
|
||||||
|
|
||||||
|
menuconfig KCONFIG_USEMODULE_LORAWAN
|
||||||
|
bool "Configure LoRaWAN MAC"
|
||||||
|
depends on HAVE_LORAWAN
|
||||||
|
help
|
||||||
|
Configure LoRaWAN module using Kconfig. This may override configurations
|
||||||
|
in LoRa PHY.
|
||||||
|
|
||||||
|
if KCONFIG_USEMODULE_LORAWAN
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "Channel plan"
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEPKG_SEMTECH_LORAMAC
|
||||||
|
default LORAMAC_REGION_EU_868
|
||||||
|
help
|
||||||
|
Configure the LoRaWAN region.
|
||||||
|
|
||||||
|
if USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
config LORAMAC_REGION_AS_923
|
||||||
|
bool "AS923"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_AU_915
|
||||||
|
bool "AU915-928"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_CN_470
|
||||||
|
bool "CN470-510"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_CN_779
|
||||||
|
bool "CN779-787"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_EU_433
|
||||||
|
bool "EU433"
|
||||||
|
|
||||||
|
endif # USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
config LORAMAC_REGION_EU_868
|
||||||
|
bool "EU863-870"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_IN_865
|
||||||
|
bool "IN865-867"
|
||||||
|
|
||||||
|
if USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
config LORAMAC_REGION_KR_920
|
||||||
|
bool "KR920-923"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_RU_864
|
||||||
|
bool "RU864-870"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_US_915
|
||||||
|
bool "US902-928"
|
||||||
|
|
||||||
|
config LORAMAC_REGION_US_915_HYBRID
|
||||||
|
bool "US902-928(hybrid)"
|
||||||
|
|
||||||
|
endif # USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "Join procedure"
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN
|
||||||
|
default LORAMAC_DEFAULT_JOIN_PROCEDURE_OTAA
|
||||||
|
help
|
||||||
|
Configure the join procedure for end node activation. There are two
|
||||||
|
options, Over The Air Activation (OTAA) results in device sending
|
||||||
|
join request to the network whereas in the case of Activation By
|
||||||
|
Personalization (ABP) the user enters the activation keys manually. OTAA
|
||||||
|
is the preferred and most secure way to connect to a LoRaWAN network.
|
||||||
|
For quick testing ABP is preferred as the device can transmit right
|
||||||
|
away without waiting for the network to provision the keys.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_JOIN_PROCEDURE_OTAA
|
||||||
|
bool "Over the air activation (OTAA)"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_JOIN_PROCEDURE_ABP
|
||||||
|
bool "Activation by personalization (ABP)"
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
if USEMODULE_GNRC_LORAWAN || USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
menu "OTAA credentials"
|
||||||
|
|
||||||
|
config LORAMAC_DEV_EUI_DEFAULT
|
||||||
|
string "Device EUI"
|
||||||
|
default "0000000000000000"
|
||||||
|
help
|
||||||
|
Configure the default device EUI for join procedure.
|
||||||
|
|
||||||
|
config LORAMAC_APP_EUI_DEFAULT
|
||||||
|
string "Application EUI"
|
||||||
|
default "0000000000000000"
|
||||||
|
help
|
||||||
|
Configure the default application EUI for join procedure.
|
||||||
|
|
||||||
|
config LORAMAC_APP_KEY_DEFAULT
|
||||||
|
string "Application key"
|
||||||
|
default "00000000000000000000000000000000"
|
||||||
|
help
|
||||||
|
Configure the default application key for join procedure.
|
||||||
|
|
||||||
|
endmenu # OTAA credentials
|
||||||
|
|
||||||
|
endif # USEMODULE_GNRC_LORAWAN || USEPKG_SEMTECH_LORAMAC
|
||||||
|
|
||||||
|
if USEMODULE_GNRC_LORAWAN
|
||||||
|
|
||||||
|
menu "ABP credentials"
|
||||||
|
|
||||||
|
config LORAMAC_DEV_ADDR_DEFAULT
|
||||||
|
string "Device address"
|
||||||
|
default "00000000"
|
||||||
|
help
|
||||||
|
Configure the default device address for ABP.
|
||||||
|
|
||||||
|
config LORAMAC_NWK_SKEY_DEFAULT
|
||||||
|
string "Network session key"
|
||||||
|
default "00000000000000000000000000000000"
|
||||||
|
help
|
||||||
|
Configure the default network session key for ABP.
|
||||||
|
|
||||||
|
config LORAMAC_APP_SKEY_DEFAULT
|
||||||
|
string "Application session key"
|
||||||
|
default "00000000000000000000000000000000"
|
||||||
|
help
|
||||||
|
Configure the default application session key for ABP.
|
||||||
|
|
||||||
|
endmenu # ABP credentials
|
||||||
|
|
||||||
|
endif # USEMODULE_GNRC_LORAWAN
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "Device Class"
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEPKG_SEMTECH_LORAMAC
|
||||||
|
default LORAMAC_DEFAULT_DEVICE_CLASS_A
|
||||||
|
help
|
||||||
|
Configure the class of device. **IMP** GNRC LoRaWAN only supports
|
||||||
|
Class A. LoRaWAN supports three classes of operation for end nodes
|
||||||
|
namely Class A, B and C. All LoRaWAN devices are expected to implement
|
||||||
|
Class A, whereas Class B and Class C can be considered as extensions to
|
||||||
|
the specification of Class A devices. More information on device classes
|
||||||
|
be found in this link
|
||||||
|
< https://www.thethingsnetwork.org/docs/lorawan/classes.html >
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DEVICE_CLASS_A
|
||||||
|
bool "Class A"
|
||||||
|
help
|
||||||
|
Class A devices support bi-directional communication between a device
|
||||||
|
and a gateway. Uplink messages (from the device to the server) can be
|
||||||
|
sent at any time (randomly). The device then opens two receive windows
|
||||||
|
at specified times (1s and 2s) after an uplink transmission. The receive
|
||||||
|
windows delays can be customised in Advanced options.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DEVICE_CLASS_B
|
||||||
|
bool "Class B"
|
||||||
|
depends on USEPKG_SEMTECH_LORAMAC
|
||||||
|
help
|
||||||
|
Class B devices extend Class A by adding scheduled receive windows for
|
||||||
|
downlink messages from the server. Using time-synchronized beacons
|
||||||
|
transmitted by the gateway, the devices periodically open receive
|
||||||
|
windows.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DEVICE_CLASS_C
|
||||||
|
bool "Class C"
|
||||||
|
depends on USEPKG_SEMTECH_LORAMAC
|
||||||
|
help
|
||||||
|
Class C devices extend Class A by keeping the receive windows open
|
||||||
|
unless they are transmitting. This allows for low-latency communication
|
||||||
|
but is many times more energy consuming than Class A devices.
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_PRIVATE_NETWORK
|
||||||
|
bool "Private Network"
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEPKG_SEMTECH_LORAMAC
|
||||||
|
help
|
||||||
|
Configure the default network type. Network is set to public by default.
|
||||||
|
Enable the option to set as network as private. This configuration sets
|
||||||
|
the sync word for LoRaWAN communication. This should be in concordance
|
||||||
|
with the gateway configuration. Public networks uses `0x34` while
|
||||||
|
private networks use `0x12` as sync word.
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "Tx Data rate index"
|
||||||
|
default LORAMAC_DEFAULT_DR_0
|
||||||
|
help
|
||||||
|
Configure Data Rate (DR). Data rate combines two aspects, Bandwidth (BW)
|
||||||
|
and Spreading Factor(SF). BW depends on the region while SF contributes
|
||||||
|
to the dwell time in any given band which is limited by region. DR hence
|
||||||
|
signifies difference combination on BW and SF for different regions.
|
||||||
|
Refer LoRaWAN 1.0.3 Regional Parameters for more information.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_0
|
||||||
|
bool "DR0"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_1
|
||||||
|
bool "DR1"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_2
|
||||||
|
bool "DR2"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_3
|
||||||
|
bool "DR3"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_4
|
||||||
|
bool "DR4"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_5
|
||||||
|
bool "DR5"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_6
|
||||||
|
bool "DR6"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_7
|
||||||
|
bool "DR7"
|
||||||
|
|
||||||
|
if LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_8
|
||||||
|
bool "DR8"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_9
|
||||||
|
bool "DR9"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_10
|
||||||
|
bool "DR10"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_11
|
||||||
|
bool "DR11"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_12
|
||||||
|
bool "DR12"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_13
|
||||||
|
bool "DR13"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_14
|
||||||
|
bool "DR14"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_DR_15
|
||||||
|
bool "DR15"
|
||||||
|
|
||||||
|
endif # LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "TX Power index"
|
||||||
|
depends on USEMODULE_RN2XX3
|
||||||
|
default LORAMAC_DEFAULT_TX_POWER_1
|
||||||
|
help
|
||||||
|
Configure the TX power index. TXPower index indicates power levels
|
||||||
|
relative to the max EIRP level of the end-device. Refer
|
||||||
|
LoRaWAN 1.0.3 Regional Parameters for more information.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_0
|
||||||
|
bool "TXPower 0"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_1
|
||||||
|
bool "TXPower 1"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_2
|
||||||
|
bool "TXPower 2"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_3
|
||||||
|
bool "TXPower 3"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_4
|
||||||
|
bool "TXPower 4"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_5
|
||||||
|
bool "TXPower 5"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_6
|
||||||
|
bool "TXPower 6"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_7
|
||||||
|
bool "TXPower 7"
|
||||||
|
|
||||||
|
if LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_8
|
||||||
|
bool "TXPower 8"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_9
|
||||||
|
bool "TXPower 9"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_10
|
||||||
|
bool "TXPower 10"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_11
|
||||||
|
bool "TXPower 11"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_12
|
||||||
|
bool "TXPower 12"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_13
|
||||||
|
bool "TXPower 13"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_14
|
||||||
|
bool "TXPower 14"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_POWER_15
|
||||||
|
bool "TXPower 15"
|
||||||
|
|
||||||
|
endif # LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_PORT
|
||||||
|
int "MAC TX port"
|
||||||
|
default 2
|
||||||
|
range 1 223
|
||||||
|
help
|
||||||
|
Configure the default MAC TX port. The TX port denotes the port field
|
||||||
|
`FPort` in the payload and is commonly used on the destination
|
||||||
|
side (Application Server) to distinguish different payload formats. For
|
||||||
|
example it can be used to identify different sensor types/values from
|
||||||
|
the same end-node and hence different payload formats can be assigned to
|
||||||
|
the different values based on value of port.
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "MAC TX mode"
|
||||||
|
default LORAMAC_DEFAULT_TX_MODE_CNF
|
||||||
|
help
|
||||||
|
Configure the type of uplink packet (confirmed/unconfirmed). A confirmed
|
||||||
|
uplink will expect an acknowledgment from the network server; otherwise,
|
||||||
|
the message will be retransmitted by the number indicated by
|
||||||
|
CONFIG_LORAMAC_DEFAULT_RETX, whereas an unconfirmed message will not
|
||||||
|
expect any acknowledgment back from the network server.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_MODE_CNF
|
||||||
|
bool "Confirmable"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_TX_MODE_UNCNF
|
||||||
|
bool "Unconfirmable"
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config LORAMAC_ADVANCED_OPTIONS
|
||||||
|
bool "Enable advanced options"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_NETID
|
||||||
|
int "NET ID" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
default 1
|
||||||
|
help
|
||||||
|
Configure the default device NETID. NETID is used by networks for
|
||||||
|
assigning network-specific addresses to their end-devices
|
||||||
|
(i.e., DevAddr) so that uplink frames sent by those devices even when
|
||||||
|
they are roaming outside their home network can be forwarded to their
|
||||||
|
home network.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RETX
|
||||||
|
int "Uplink retransmissions" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEMODULE_RN2XX3
|
||||||
|
range 0 255
|
||||||
|
default 5
|
||||||
|
help
|
||||||
|
Configure the maximum number of retransmissions to be used for a
|
||||||
|
confirmed uplink packet, if no downlink acknowledgment is received from
|
||||||
|
the network.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_ADR
|
||||||
|
bool "Enable ADR" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEPKG_SEMTECH_LORAMAC || USEMODULE_RN2XX3
|
||||||
|
help
|
||||||
|
Enable or disable Adaptive Data Rate (ADR). If enabled the end node will
|
||||||
|
inform the network server about the status of ADR using the ADR field in
|
||||||
|
uplink data packet. The network server will then optimize the data rate
|
||||||
|
and the transmission power of the end node based on the information
|
||||||
|
collected from the network.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_LINKCHK
|
||||||
|
int "Link check interval (in seconds)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_RN2XX3
|
||||||
|
range 0 65535
|
||||||
|
default 0
|
||||||
|
help
|
||||||
|
Configure the default link check interval (in seconds). 0 means the link
|
||||||
|
check process is disabled. The link check process is used by an
|
||||||
|
end-device to validate its connectivity with the network. The frame has
|
||||||
|
no payload. When a `LinkCheckReq` is received by the network server via
|
||||||
|
one or multiple gateways, it responds with a `LinkCheckAns` MAC command.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX1_DELAY
|
||||||
|
int "RX1 window delay (in milliseconds)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEMODULE_RN2XX3
|
||||||
|
range 1000 5000
|
||||||
|
default 1000
|
||||||
|
help
|
||||||
|
Configure the RX1 window delay (in milliseconds). This configuration
|
||||||
|
specifies the delay to open the RX1 window after the end of
|
||||||
|
uplink modulation on the end-node.
|
||||||
|
|
||||||
|
choice
|
||||||
|
bool "RX2 window datarate index" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN || USEMODULE_RN2XX3
|
||||||
|
default LORAMAC_DEFAULT_RX2_DR_0 if LORAMAC_REGION_EU_868
|
||||||
|
default LORAMAC_DEFAULT_RX2_DR_2 if LORAMAC_REGION_IN_865
|
||||||
|
help
|
||||||
|
Configure the RX2 window datarate. This may be changed only if the
|
||||||
|
network server can be configured with the same datarate.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_0
|
||||||
|
bool "DR0"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_1
|
||||||
|
bool "DR1"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_2
|
||||||
|
bool "DR2"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_3
|
||||||
|
bool "DR3"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_4
|
||||||
|
bool "DR4"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_5
|
||||||
|
bool "DR5"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_6
|
||||||
|
bool "DR6"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_7
|
||||||
|
bool "DR7"
|
||||||
|
|
||||||
|
if LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_8
|
||||||
|
bool "DR8"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_9
|
||||||
|
bool "DR9"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_10
|
||||||
|
bool "DR10"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_11
|
||||||
|
bool "DR11"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_12
|
||||||
|
bool "DR12"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_13
|
||||||
|
bool "DR13"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_14
|
||||||
|
bool "DR14"
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_DR_15
|
||||||
|
bool "DR15"
|
||||||
|
|
||||||
|
endif # LORAMAC_REGION_US_915
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_RX2_FREQ
|
||||||
|
int "RX2 Frequency (in Hz)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_RN2XX3 || USEMODULE_GNRC_LORAWAN
|
||||||
|
default 866550000 if LORAMAC_REGION_IN_865
|
||||||
|
range 137000000 1020000000
|
||||||
|
default 869525000
|
||||||
|
help
|
||||||
|
Configure the frequency of RX2 receive window.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_JOIN_DELAY1
|
||||||
|
int "Join accept delay 1 (in seconds)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_RN2XX3 || USEMODULE_GNRC_LORAWAN
|
||||||
|
default 5
|
||||||
|
help
|
||||||
|
Configure the maximum wait time in end node to receive the `join-accept`
|
||||||
|
message sent by the network in the first receive window. This is similar
|
||||||
|
to the operation of RX1 window.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_JOIN_DELAY2
|
||||||
|
int "Join accept delay 2 (in seconds)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_RN2XX3
|
||||||
|
default 6
|
||||||
|
help
|
||||||
|
Configure the maximum wait time in end node to receive the `join-accept`
|
||||||
|
message sent by the network in the second receive window. This is
|
||||||
|
similar to the operation of RX2 window.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_MAX_FCNT_GAP
|
||||||
|
int "Max frame counter deviation" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEMODULE_GNRC_LORAWAN
|
||||||
|
default 16384
|
||||||
|
help
|
||||||
|
Configure the maximum frame counter deviation which is the difference
|
||||||
|
between the frame counter values transmitted by the End Node and the
|
||||||
|
value stored in Network Server (NS).
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_SYSTEM_MAX_RX_ERROR
|
||||||
|
int "Max system timing error (in milliseconds)" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEPKG_SEMTECH_LORAMAC
|
||||||
|
default 50
|
||||||
|
help
|
||||||
|
Configure the maximum sytem timing error. This configuration is used to
|
||||||
|
increase the RX window to account for timer drift. This may be decreased
|
||||||
|
if the system clock is accurate, for eg: if the system clock is from a
|
||||||
|
TCXO.
|
||||||
|
|
||||||
|
config LORAMAC_DEFAULT_MIN_RX_SYMBOLS
|
||||||
|
int "Min RX symbols to detect frame" if LORAMAC_ADVANCED_OPTIONS
|
||||||
|
depends on USEPKG_SEMTECH_LORAMAC
|
||||||
|
default 12
|
||||||
|
help
|
||||||
|
Configure the minimum RX symbols used to detect a frame. This
|
||||||
|
configuration is used to arrive at `T_RX_late` which is used in RX
|
||||||
|
window calculation. This may be increased to account for inaccuracies in
|
||||||
|
system timer. Refer SX1276_settings_for_LoRaWAN_v2p2.pdf
|
||||||
|
(AN1200.24) from Semtech for more information.
|
||||||
|
|
||||||
|
endif # KCONFIG_USEMODULE_LORAWAN
|
||||||
Loading…
x
Reference in New Issue
Block a user