tests/periph_spi: rewrite of SPI test
This commit is contained in:
Hauke Petersen
parent
96fe0fd63e
commit
a25b25d830
@ -3,6 +3,7 @@ include ../Makefile.tests_common
|
|||||||
|
|
||||||
FEATURES_REQUIRED = periph_spi
|
FEATURES_REQUIRED = periph_spi
|
||||||
|
|
||||||
|
USEMODULE += xtimer
|
||||||
USEMODULE += shell
|
USEMODULE += shell
|
||||||
USEMODULE += shell_commands
|
USEMODULE += shell_commands
|
||||||
|
|
||||||
|
|||||||
@ -24,307 +24,402 @@
|
|||||||
#include <string.h>
|
#include <string.h>
|
||||||
#include <stdlib.h>
|
#include <stdlib.h>
|
||||||
|
|
||||||
#include "board.h"
|
#include "xtimer.h"
|
||||||
#include "shell.h"
|
#include "shell.h"
|
||||||
#include "periph/spi.h"
|
#include "periph/spi.h"
|
||||||
#include "periph/gpio.h"
|
|
||||||
|
|
||||||
enum {
|
/**
|
||||||
READ = 0,
|
* @brief Some parameters used for benchmarking
|
||||||
WRITE,
|
*/
|
||||||
INIT
|
#define BENCH_REDOS (1000)
|
||||||
} rw;
|
#define BENCH_SMALL (2)
|
||||||
|
#define BENCH_LARGE (100)
|
||||||
|
#define BENCH_PAYLOAD ('b')
|
||||||
|
#define BENCH_REGADDR (0x23)
|
||||||
|
|
||||||
static int spi_dev = -1;
|
#define BUF_SIZE (512U)
|
||||||
static gpio_t spi_cs = -1;
|
|
||||||
static int spi_mode_int = -1;
|
|
||||||
static spi_conf_t spi_mode = -1;
|
|
||||||
static int spi_speed_int = -1;
|
|
||||||
static spi_speed_t spi_speed = -1;
|
|
||||||
|
|
||||||
/* 0 for slave, 1 for master, -1 for not initialized */
|
/**
|
||||||
static int spi_master = -1;
|
* @brief Benchmark buffers
|
||||||
static int port = -1;
|
*/
|
||||||
static int pin = -1;
|
static uint8_t bench_wbuf[BENCH_LARGE];
|
||||||
|
static uint8_t bench_rbuf[BENCH_LARGE];
|
||||||
|
|
||||||
static char buffer[256]; /* temporary buffer */
|
/**
|
||||||
static char rx_buffer[256]; /* global receive buffer */
|
* @brief Generic buffer used for receiving
|
||||||
static int rx_counter = 0;
|
*/
|
||||||
|
static uint8_t buf[BUF_SIZE];
|
||||||
|
|
||||||
static volatile int state;
|
static struct {
|
||||||
static char* mem = "Hello Master! abcdefghijklmnopqrstuvwxyz 0123456789 "
|
spi_t dev;
|
||||||
"ABCDEFGHIJKLMNOPQRSTUVWXYZ";
|
spi_mode_t mode;
|
||||||
|
spi_clk_t clk;
|
||||||
|
spi_cs_t cs;
|
||||||
|
} spiconf;
|
||||||
|
|
||||||
int parse_spi_dev(int argc, char **argv)
|
void print_bytes(char* title, uint8_t* data, size_t len)
|
||||||
{
|
{
|
||||||
/* reset default values */
|
printf("%4s\n", title);
|
||||||
spi_dev = SPI_0;
|
for (size_t i = 0; i < len; i++) {
|
||||||
spi_mode = SPI_CONF_FIRST_RISING;
|
printf(" %2i ", (int)i);
|
||||||
spi_speed = SPI_SPEED_1MHZ;
|
|
||||||
|
|
||||||
if (argc < 4) {
|
|
||||||
printf("usage: %s <dev> <cs port> <cs pin> [mode [speed]]\n", argv[0]);
|
|
||||||
puts(" DEV is the SPI device to use:");
|
|
||||||
for (int i = 0; i < SPI_NUMOF; i++) {
|
|
||||||
printf(" %i - SPI_%i\n", i, i);
|
|
||||||
}
|
|
||||||
puts(" cs port: port to use as the chip select line");
|
|
||||||
puts(" cs pin: pin to use on th given port as cs line");
|
|
||||||
puts(" mode: must be one of the following options (* marks "
|
|
||||||
"default value):");
|
|
||||||
puts(" *0 - POL:0, PHASE:0 - ON FIRST RISING EDGE");
|
|
||||||
puts(" 1 - POL:0, PHASE:1 - ON SECOND RISING EDGE");
|
|
||||||
puts(" 2 - POL:1, PHASE:0 - ON FIRST FALLING EDGE");
|
|
||||||
puts(" 3 - POL:1, PHASE:1 - on second falling edge");
|
|
||||||
puts(" speed: must be one of the following options (only used "
|
|
||||||
"in master mode):");
|
|
||||||
puts(" 0 - 100 KHz");
|
|
||||||
puts(" 1 - 400 KHz");
|
|
||||||
puts(" *2 - 1 MHz");
|
|
||||||
puts(" 3 - 5 MHz");
|
|
||||||
puts(" 4 - 10 MHz\n");
|
|
||||||
return -4;
|
|
||||||
}
|
|
||||||
spi_dev = atoi(argv[1]);
|
|
||||||
if (spi_dev < 0 || spi_dev >= SPI_NUMOF) {
|
|
||||||
puts("error: invalid DEV value given");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
port = atoi(argv[2]);
|
|
||||||
pin = atoi(argv[3]);
|
|
||||||
spi_cs = GPIO_PIN(port,pin);
|
|
||||||
if (argc >= 5) {
|
|
||||||
spi_mode_int = argv[4][0] - '0';
|
|
||||||
if (spi_mode_int < 0 || spi_mode_int > 3) {
|
|
||||||
puts("error: invalid MODE value given");
|
|
||||||
return -2;
|
|
||||||
} else {
|
|
||||||
switch (spi_mode_int) {
|
|
||||||
case 0:
|
|
||||||
spi_mode = SPI_CONF_FIRST_RISING;
|
|
||||||
break;
|
|
||||||
case 1:
|
|
||||||
spi_mode = SPI_CONF_SECOND_RISING;
|
|
||||||
break;
|
|
||||||
case 2:
|
|
||||||
spi_mode = SPI_CONF_FIRST_FALLING;
|
|
||||||
break;
|
|
||||||
case 3:
|
|
||||||
spi_mode = SPI_CONF_SECOND_FALLING;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (argc >= 6) {
|
|
||||||
spi_speed_int = argv[5][0] - '0';
|
|
||||||
if (spi_speed_int < 0 || spi_speed_int > 4) {
|
|
||||||
puts("error: invalid SPEED value given");
|
|
||||||
return -3;
|
|
||||||
} else {
|
|
||||||
switch (spi_speed_int) {
|
|
||||||
case 0:
|
|
||||||
spi_speed = SPI_SPEED_100KHZ;
|
|
||||||
break;
|
|
||||||
case 1:
|
|
||||||
spi_speed = SPI_SPEED_400KHZ;
|
|
||||||
break;
|
|
||||||
case 2:
|
|
||||||
spi_speed = SPI_SPEED_1MHZ;
|
|
||||||
break;
|
|
||||||
case 3:
|
|
||||||
spi_speed = SPI_SPEED_5MHZ;
|
|
||||||
break;
|
|
||||||
case 4:
|
|
||||||
spi_speed = SPI_SPEED_10MHZ;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
void print_bytes(char* title, char* chars, int length)
|
|
||||||
{
|
|
||||||
printf("%4s", title);
|
|
||||||
for (int i = 0; i < length; i++) {
|
|
||||||
printf(" %2i ", i);
|
|
||||||
}
|
}
|
||||||
printf("\n ");
|
printf("\n ");
|
||||||
for (int i = 0; i < length; i++) {
|
for (size_t i = 0; i < len; i++) {
|
||||||
printf(" 0x%02x", (int)chars[i]);
|
printf(" 0x%02x", (int)data[i]);
|
||||||
}
|
}
|
||||||
printf("\n ");
|
printf("\n ");
|
||||||
for (int i = 0; i < length; i++) {
|
for (size_t i = 0; i < len; i++) {
|
||||||
if (chars[i] < ' ' || chars[i] > '~') {
|
if (data[i] < ' ' || data[i] > '~') {
|
||||||
printf(" ?? ");
|
printf(" ?? ");
|
||||||
}
|
}
|
||||||
else {
|
else {
|
||||||
printf(" %c ", chars[i]);
|
printf(" %c ", (char)data[i]);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
printf("\n\n");
|
printf("\n\n");
|
||||||
}
|
}
|
||||||
|
|
||||||
void slave_on_cs(void *arg)
|
int cmd_init(int argc, char **argv)
|
||||||
{
|
{
|
||||||
(void)arg;
|
int dev, mode, clk, port, pin, tmp;
|
||||||
|
|
||||||
spi_transmission_begin(spi_dev, 'F');
|
if (argc < 5) {
|
||||||
state = 0;
|
printf("usage: %s <dev> <mode> <clk> <cs port> <cs pin>\n", argv[0]);
|
||||||
rw = INIT;
|
puts("\tdev:");
|
||||||
|
for (int i = 0; i < (int)SPI_NUMOF; i++) {
|
||||||
|
printf("\t\t%i: SPI_DEV(%i)\n", i, i);
|
||||||
|
}
|
||||||
|
puts("\tmode:");
|
||||||
|
puts("\t\t0: POL:0, PHASE:0 - on first rising edge");
|
||||||
|
puts("\t\t1: POL:0, PHASE:1 - on second rising edge");
|
||||||
|
puts("\t\t2: POL:1, PHASE:0 - on first falling edge");
|
||||||
|
puts("\t\t3: POL:1, PHASE:1 - on second falling edge");
|
||||||
|
puts("\tclk:");
|
||||||
|
puts("\t\t0: 100 KHz");
|
||||||
|
puts("\t\t1: 400 KHz");
|
||||||
|
puts("\t\t2: 1 MHz");
|
||||||
|
puts("\t\t3: 5 MHz");
|
||||||
|
puts("\t\t4: 10 MHz");
|
||||||
|
puts("\tcs port:");
|
||||||
|
puts("\t\tPort of the CS pin, set to -1 for hardware chip select");
|
||||||
|
puts("\tcs pin:");
|
||||||
|
puts("\t\tPin used for chip select. If hardware chip select is enabled,\n"
|
||||||
|
"\t\tthis value specifies the internal HWCS line");
|
||||||
|
return 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
char slave_on_data(char data)
|
/* parse the given SPI device */
|
||||||
{
|
dev = atoi(argv[1]);
|
||||||
rx_buffer[rx_counter] = data;
|
if (dev < 0 || dev >= SPI_NUMOF) {
|
||||||
rx_counter++;
|
puts("error: invalid SPI device specified");
|
||||||
if (rx_counter >= 256) {
|
return 1;
|
||||||
rx_counter = 0;
|
}
|
||||||
|
spiconf.dev = SPI_DEV(dev);
|
||||||
|
|
||||||
|
/* parse the SPI mode */
|
||||||
|
mode = atoi(argv[2]);
|
||||||
|
switch (mode) {
|
||||||
|
case 0: spiconf.mode = SPI_MODE_0; break;
|
||||||
|
case 1: spiconf.mode = SPI_MODE_1; break;
|
||||||
|
case 2: spiconf.mode = SPI_MODE_2; break;
|
||||||
|
case 3: spiconf.mode = SPI_MODE_3; break;
|
||||||
|
default:
|
||||||
|
puts("error: invalid SPI mode specified");
|
||||||
|
return 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
switch (rw) {
|
/* parse the targeted clock speed */
|
||||||
case READ:
|
clk = atoi(argv[3]);
|
||||||
return mem[state++];
|
switch (clk) {
|
||||||
case WRITE:
|
case 0: spiconf.clk = SPI_CLK_100KHZ; break;
|
||||||
mem[state++] = data;
|
case 1: spiconf.clk = SPI_CLK_400KHZ; break;
|
||||||
return 'o';
|
case 2: spiconf.clk = SPI_CLK_1MHZ; break;
|
||||||
case INIT:
|
case 3: spiconf.clk = SPI_CLK_5MHZ; break;
|
||||||
if (data == ' ') {
|
case 4: spiconf.clk = SPI_CLK_10MHZ; break;
|
||||||
rw = READ;
|
default:
|
||||||
return mem[state++];
|
puts("error: invalid bus speed specified");
|
||||||
} else if (data & 0x80) {
|
return 1;
|
||||||
rw = WRITE;
|
|
||||||
state = (data & 0x7f);
|
|
||||||
return 'W';
|
|
||||||
} else {
|
|
||||||
rw = READ;
|
|
||||||
state = data;
|
|
||||||
return mem[state++];
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return 'e';
|
|
||||||
}
|
}
|
||||||
|
|
||||||
int cmd_init_master(int argc, char **argv)
|
/* parse chip select port and pin */
|
||||||
{
|
port = atoi(argv[4]);
|
||||||
int res;
|
pin = atoi(argv[5]);
|
||||||
spi_master = -1;
|
if (pin < 0 || port < -1) {
|
||||||
if (parse_spi_dev(argc, argv) < 0) {
|
puts("error: invalid CS port/pin combination specified");
|
||||||
return 1;
|
|
||||||
}
|
}
|
||||||
spi_acquire(spi_dev);
|
if (port == -1) { /* hardware chip select line */
|
||||||
res = spi_init_master(spi_dev, spi_mode, spi_speed);
|
spiconf.cs = SPI_HWCS(pin);
|
||||||
spi_release(spi_dev);
|
|
||||||
if (res < 0) {
|
|
||||||
printf("spi_init_master: error initializing SPI_%i device (code %i)\n",
|
|
||||||
spi_dev, res);
|
|
||||||
return 1;
|
|
||||||
}
|
}
|
||||||
res = gpio_init(spi_cs, GPIO_OUT);
|
else {
|
||||||
if (res < 0){
|
spiconf.cs = (spi_cs_t)GPIO_PIN(port, pin);
|
||||||
printf("gpio_init: error initializing GPIO_PIN(%i, %i) as CS line (code %i)\n",
|
|
||||||
port, pin, res);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
gpio_set(spi_cs);
|
|
||||||
spi_master = 1;
|
|
||||||
printf("SPI_%i successfully initialized as master, cs: GPIO_PIN(%i, %i), mode: %i, speed: %i\n",
|
|
||||||
spi_dev, port, pin, spi_mode_int, spi_speed_int);
|
|
||||||
return 0;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
int cmd_init_slave(int argc, char **argv)
|
/* test setup */
|
||||||
{
|
tmp = spi_init_cs(spiconf.dev, spiconf.cs);
|
||||||
int res;
|
if (tmp != SPI_OK) {
|
||||||
spi_master = -1;
|
puts("error: unable to initialize the given chip select line");
|
||||||
if (parse_spi_dev(argc, argv) < 0) {
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
spi_acquire(spi_dev);
|
tmp = spi_acquire(spiconf.dev, spiconf.cs, spiconf.mode, spiconf.clk);
|
||||||
res = spi_init_slave(spi_dev, spi_mode, slave_on_data);
|
if (tmp == SPI_NOMODE) {
|
||||||
spi_release(spi_dev);
|
puts("error: given SPI mode is not supported");
|
||||||
if (res < 0) {
|
|
||||||
printf("spi_init_slave: error initializing SPI_%i device (code: %i)\n",
|
|
||||||
spi_dev, res);
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
res = gpio_init_int(spi_cs, GPIO_IN, GPIO_FALLING, slave_on_cs, 0);
|
else if (tmp == SPI_NOCLK) {
|
||||||
if (res < 0){
|
puts("error: targeted clock speed is not supported");
|
||||||
printf("gpio_init_int: error initializing GPIO_PIN(%i, %i) as CS line (code %i)\n",
|
|
||||||
port, pin, res);
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
spi_master = 0;
|
else if (tmp != SPI_OK) {
|
||||||
printf("SPI_%i successfully initialized as slave, cs: GPIO_PIN(%i, %i), mode: %i\n",
|
puts("error: unable to acquire bus with given parameters");
|
||||||
spi_dev, port, pin, spi_mode_int);
|
return 1;
|
||||||
|
}
|
||||||
|
spi_release(spiconf.dev);
|
||||||
|
|
||||||
|
printf("SPI_DEV(%i) initialized: mode: %i, clk: %i, cs_port: %i, cs_pin: %i\n",
|
||||||
|
dev, mode, clk, port, pin);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int cmd_transfer(int argc, char **argv)
|
int cmd_transfer(int argc, char **argv)
|
||||||
{
|
{
|
||||||
int res;
|
size_t len;
|
||||||
char *hello = "Hello";
|
|
||||||
|
|
||||||
if (spi_master != 1) {
|
|
||||||
puts("error: node is not initialized as master, please do so first");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (argc < 2) {
|
if (argc < 2) {
|
||||||
puts("No data to transfer given, will transfer 'Hello' to device");
|
printf("usage: %s <data>\n", argv[0]);
|
||||||
}
|
|
||||||
else {
|
|
||||||
hello = argv[1];
|
|
||||||
}
|
|
||||||
|
|
||||||
/* do the actual data transfer */
|
|
||||||
spi_acquire(spi_dev);
|
|
||||||
gpio_clear(spi_cs);
|
|
||||||
res = spi_transfer_bytes(spi_dev, hello, buffer, strlen(hello));
|
|
||||||
gpio_set(spi_cs);
|
|
||||||
spi_release(spi_dev);
|
|
||||||
|
|
||||||
/* look at the results */
|
|
||||||
if (res < 0) {
|
|
||||||
printf("error: unable to transfer data to slave (code: %i)\n", res);
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
else {
|
|
||||||
printf("Transfered %i bytes:\n", res);
|
if (spiconf.dev == SPI_UNDEF) {
|
||||||
print_bytes("MOSI", hello, res);
|
puts("error: SPI is not initialized, please initialize bus first");
|
||||||
print_bytes("MISO", buffer, res);
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* get bus access */
|
||||||
|
if (spi_acquire(spiconf.dev, spiconf.cs,
|
||||||
|
spiconf.mode, spiconf.clk) != SPI_OK) {
|
||||||
|
puts("error: unable to acquire the SPI bus");
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* transfer data */
|
||||||
|
len = strlen(argv[1]);
|
||||||
|
memset(buf, 0, sizeof(buf));
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false, argv[1], buf, len);
|
||||||
|
|
||||||
|
/* release the bus */
|
||||||
|
spi_release(spiconf.dev);
|
||||||
|
|
||||||
|
/* print results */
|
||||||
|
print_bytes("Sent bytes", (uint8_t *)argv[1], len);
|
||||||
|
print_bytes("Received bytes", buf, len);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
}
|
|
||||||
|
|
||||||
int cmd_print(int argc, char **argv)
|
int cmd_bench(int argc, char **argv)
|
||||||
{
|
{
|
||||||
if (spi_master != 0) {
|
uint32_t start, stop;
|
||||||
puts("error: node is not initialized as slave");
|
uint32_t sum = 0;
|
||||||
|
uint8_t in;
|
||||||
|
uint8_t out = (uint8_t)BENCH_PAYLOAD;
|
||||||
|
|
||||||
|
if (spiconf.dev == SPI_UNDEF) {
|
||||||
|
puts("error: SPI is not initialized, please initialize bus first");
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
else {
|
|
||||||
printf("Received %i bytes:\n", rx_counter);
|
/* prepare buffer */
|
||||||
print_bytes("MOSI", rx_buffer, rx_counter);
|
memset(bench_wbuf, BENCH_PAYLOAD, BENCH_LARGE);
|
||||||
|
|
||||||
|
/* get access to the bus */
|
||||||
|
if (spi_acquire(spiconf.dev, spiconf.cs,
|
||||||
|
spiconf.mode, spiconf.clk) != SPI_OK) {
|
||||||
|
puts("error: unable to acquire the SPI bus");
|
||||||
|
return 1;
|
||||||
}
|
}
|
||||||
rx_counter = 0;
|
|
||||||
memset(&rx_buffer, 0, 256);
|
puts("### Running some benchmarks, all values in [us] ###\n");
|
||||||
|
|
||||||
|
/* 1 - write 1000 times 1 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
in = spi_transfer_byte(spiconf.dev, spiconf.cs, false, out);
|
||||||
|
(void)in;
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 1 - write %i times %i byte:", BENCH_REDOS, 1);
|
||||||
|
printf("\t\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 2 - write 1000 times 2 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
bench_wbuf, NULL, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 2 - write %i times %i byte:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 3 - write 1000 times 100 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
bench_wbuf, NULL, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 3 - write %i times %i byte:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 4 - write 1000 times 1 byte to register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
in = spi_transfer_reg(spiconf.dev, spiconf.cs, BENCH_REGADDR, out);
|
||||||
|
(void)in;
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 4 - write %i times %i byte to register:", BENCH_REDOS, 1);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 5 - write 1000 times 2 byte to register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
bench_wbuf, NULL, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 5 - write %i times %i byte to register:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 6 - write 1000 times 100 byte to register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
bench_wbuf, NULL, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 6 - write %i times %i byte to register:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 7 - read 1000 times 2 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
NULL, bench_rbuf, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 7 - read %i times %i byte:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 8 - read 1000 times 100 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
NULL, bench_rbuf, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 8 - read %i times %i byte:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 9 - read 1000 times 2 byte from register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
NULL, bench_rbuf, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf(" 9 - read %i times %i byte from register:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 10 - read 1000 times 100 byte from register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
NULL, bench_rbuf, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf("10 - read %i times %i byte from register:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 11 - transfer 1000 times 2 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
bench_wbuf, bench_rbuf, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf("11 - transfer %i times %i byte:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 12 - transfer 1000 times 100 byte */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_bytes(spiconf.dev, spiconf.cs, false,
|
||||||
|
bench_wbuf, bench_rbuf, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf("12 - transfer %i times %i byte:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 13 - transfer 1000 times 2 byte from/to register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
bench_wbuf, bench_rbuf, BENCH_SMALL);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf("13 - transfer %i times %i byte to register:", BENCH_REDOS, BENCH_SMALL);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
/* 14 - transfer 1000 times 100 byte from/to register */
|
||||||
|
start = xtimer_now_usec();
|
||||||
|
for (int i = 0; i < BENCH_REDOS; i++) {
|
||||||
|
spi_transfer_regs(spiconf.dev, spiconf.cs, BENCH_REGADDR,
|
||||||
|
bench_wbuf, bench_rbuf, BENCH_LARGE);
|
||||||
|
}
|
||||||
|
stop = xtimer_now_usec();
|
||||||
|
printf("14 - transfer %i times %i byte to register:", BENCH_REDOS, BENCH_LARGE);
|
||||||
|
printf("\t%i\n", (int)(stop - start));
|
||||||
|
sum += (stop - start);
|
||||||
|
|
||||||
|
printf("-- - SUM:\t\t\t\t\t%i\n", (int)sum);
|
||||||
|
|
||||||
|
spi_release(spiconf.dev);
|
||||||
|
puts("\n### All runs complete ###");
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static const shell_command_t shell_commands[] = {
|
static const shell_command_t shell_commands[] = {
|
||||||
{ "init_master", "Initialize node as SPI master", cmd_init_master },
|
{ "init", "Setup a particular SPI configuration", cmd_init },
|
||||||
{ "init_slave", "Initialize node as SPI slave", cmd_init_slave },
|
{ "send", "Transfer string to slave", cmd_transfer },
|
||||||
{ "send", "Transfer string to slave (only in master mode)", cmd_transfer },
|
{ "bench", "Runs some benchmarks", cmd_bench },
|
||||||
{ "print_rx", "Print the received string (only in slave mode)", cmd_print },
|
|
||||||
{ NULL, NULL, NULL }
|
{ NULL, NULL, NULL }
|
||||||
};
|
};
|
||||||
|
|
||||||
int main(void)
|
int main(void)
|
||||||
{
|
{
|
||||||
puts("\nRIOT low-level SPI driver test");
|
puts("Manual SPI peripheral driver test");
|
||||||
puts("This application enables you to test a platforms SPI driver implementation.");
|
puts("Refer to the README.md file for more information.\n");
|
||||||
puts("Enter 'help' to get started\n");
|
|
||||||
|
printf("There are %i SPI devices configured for your platform.\n",
|
||||||
|
(int)SPI_NUMOF);
|
||||||
|
|
||||||
|
/* reset local SPI configuration */
|
||||||
|
spiconf.dev = SPI_UNDEF;
|
||||||
|
|
||||||
/* run the shell */
|
/* run the shell */
|
||||||
char line_buf[SHELL_DEFAULT_BUFSIZE];
|
char line_buf[SHELL_DEFAULT_BUFSIZE];
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user