From a9cb3b637f09511ad24fd19a8dd50313abc832cc Mon Sep 17 00:00:00 2001 From: Sebastian Meiling Date: Tue, 18 Feb 2020 09:42:46 +0100 Subject: [PATCH] boards: add pinout ref for pba-d-01-kw2x --- boards/pba-d-01-kw2x/doc.txt | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) diff --git a/boards/pba-d-01-kw2x/doc.txt b/boards/pba-d-01-kw2x/doc.txt index 045a555a85..213b28c282 100644 --- a/boards/pba-d-01-kw2x/doc.txt +++ b/boards/pba-d-01-kw2x/doc.txt @@ -31,7 +31,41 @@ phyNODE board with equipped phyWAVE-KW2x processor/radio-module. The PCB-pieces with the mounted sensors can be separated from the evaluation board to capture sensor values from specific spatial points. -[Pinout reference](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Interfaces) +### Pinout Reference + +The board features an Arduino like header connector to mount shields. The +spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly. + +The pinout below shows the vendor specific naming and functionality. +The actual pin configuration of the board for RIOT can be found in +[periph_conf.h](https://github.com/RIOT-OS/RIOT/blob/master/boards/pba-d-01-kw2x/include/periph_conf.h). + +@note Not all signals and pins are compatible with Arduino Uno R3. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + _X1____________________ + | D15 |___DIO21, PE19, I2C0 SCL + | D14 |___DIO20, PE18, I2C0 SDA + | AREF |___AREF, VCC3V3 + | GND3 |___GND + X___| RESERVED D13 |___DIO3, PC5, SPI0 SCK + VCC3V3___| IOREF D12 |___DIO5, PC7, SPI0 MISO + nRESET___| RST TGTMCU D11 |___DIO4, PC6, SPI0 MOSI + VCC3V3___| P3V3 D10 |___DIO2, PC4, SPI0 CS0 + P5V USB OUT___| P5V USB D9 |___DIO9, PD4, PWM + GND_________| GND2 D8 |___DIO6, PD1 + \___| GND1 | + X___| P5_9V VIN D7 |___DIO24, PA1, PWM, TDI2 + | D6 |___DIO25, PA2, PWM, TDO2 + DIO15, PE2, ADC ___| A0 D5 |___DIO11, PD6, PWM + DIO16, PE3, ADC, TDO1 ___| A1 D4 |___DIO29, PA19, TCLKIN + DIO12, PD7, ADC ___| A2 D3 |___DIO27, PA4, PWM + DIO10, PD5, ADC ___| A3 D2 |___DIO17, PE4, LLWU, TDI1 + DIO13, PE0, ADC, I2CSDA ___| A4 D1 |___DIO8, PD3, UART2 TX + DIO14, PE1, ADC, I2CSCL ___| A5 D0 |___DIO7, PD2, UART2 RX + ----------------------- + Arduino Uno R3 Connector +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ## Implementation Status