cpus: use default isr_ctx struct in GPIO drivers

cpu/atmega2560/periph/gpio.c

@@ -34,12 +34,7 @@
 #define GPIO_OFFSET_PIN_PIN     (0x03)
 #define GPIO_EXT_INT_NUMOF      (8U)
 
-typedef struct {
+static gpio_isr_ctx_t config[GPIO_EXT_INT_NUMOF];
-    gpio_cb_t cb;
-    void *arg;
-} gpio_state_t;
-
-static gpio_state_t config[GPIO_EXT_INT_NUMOF];
 
 /**
  * @brief     Extract the pin number of the given pin

cpu/cc2538/periph/gpio.c

@@ -44,12 +44,7 @@
 */
 #define gpio_enabled(dev) ( (enable_lut >> (dev)) & 1 )
 
-typedef struct {
+static gpio_isr_ctx_t gpio_config[GPIO_NUMOF];
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_state_t;
-
-static gpio_state_t gpio_config[GPIO_NUMOF];
 
 const uint32_t enable_lut = 0
 #if GPIO_0_EN
@@ -514,7 +509,7 @@ void gpio_write(gpio_t dev, int value)
 void isr_gpioa(void)
 {
     int mis, bit;
-    gpio_state_t* state;
+    gpio_isr_ctx_t* state;
 
     /* Latch and clear the interrupt status early on: */
     mis = GPIO_A->MIS;
@@ -539,7 +534,7 @@ void isr_gpioa(void)
 void isr_gpiob(void)
 {
     int mis, bit;
-    gpio_state_t* state;
+    gpio_isr_ctx_t* state;
 
     /* Latch and clear the interrupt status early on: */
     mis = GPIO_B->MIS;
@@ -564,7 +559,7 @@ void isr_gpiob(void)
 void isr_gpioc(void)
 {
     int mis, bit;
-    gpio_state_t* state;
+    gpio_isr_ctx_t* state;
 
     /* Latch and clear the interrupt status early on: */
     mis = GPIO_C->MIS;
@@ -589,7 +584,7 @@ void isr_gpioc(void)
 void isr_gpiod(void)
 {
     int mis, bit;
-    gpio_state_t* state;
+    gpio_isr_ctx_t* state;
 
     /* Latch and clear the interrupt status early on: */
     mis = GPIO_D->MIS;

cpu/ezr32wg/periph/gpio.c

@@ -31,19 +31,10 @@
  * @brief   Number of external interrupt lines
  */
 #define NUMOF_IRQS                  (16U)
-
-/**
- * @brief   Datatype to use for saving the interrupt contexts
- */
-typedef struct {
-    gpio_cb_t cb;       /**< callback to call on GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_exti_t;
-
 /**
  * @brief   Hold one interrupt context per interrupt line
  */
-static gpio_exti_t isr_ctx[NUMOF_IRQS];
+static gpio_isr_ctx_t isr_ctx[NUMOF_IRQS];
 
 static inline int _port_num(gpio_t pin)
 {

cpu/lpc11u34/periph/gpio.c

@@ -22,11 +22,6 @@
 #include "thread.h"
 #include "periph/gpio.h"
 
-typedef struct {
-    gpio_cb_t cb;
-    void *arg;
-} gpio_state_t;
-
 /* Static IOCON registers definition */
 volatile uint32_t * const lpc_pin_registers[] = {
     /* PORT 0 (PIO0_0 -> PIO0_23) */
@@ -63,7 +58,7 @@ volatile uint32_t * const lpc_pin_registers[] = {
 
 static int8_t flex_int_mapping[GPIO_NUMOF];
 
-static gpio_state_t gpio_config[GPIO_NUMOF];
+static gpio_isr_ctx_t gpio_config[GPIO_NUMOF];
 static uint8_t gpio_int_id = 0;
 
 /* static port mappings */

cpu/lpc2387/periph/gpio.c

@@ -34,12 +34,7 @@
 
 static BITFIELD(_gpio_config_bitfield, GPIO_NUM_ISR);
 
-typedef struct {
+static gpio_isr_ctx_t _gpio_states[GPIO_NUM_ISR];
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_state_t;
-
-static gpio_state_t _gpio_states[GPIO_NUM_ISR];
 static BITFIELD(_gpio_rising, GPIO_NUM_ISR);
 static BITFIELD(_gpio_falling, GPIO_NUM_ISR);
 static uint8_t _gpio_isr_map[64]; /* only ports 0+2 can have ISRs */

cpu/msp430fxyz/periph/gpio.c

@@ -32,18 +32,10 @@
  */
 #define PINS_PER_PORT       (8U)
 
-/**
- * @brief   Datatype to use for saving the interrupt contexts
- */
-typedef struct {
-    gpio_cb_t cb;       /**< callback to call on GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} isr_ctx_t;
-
 /**
  * @brief   Interrupt context for each interrupt line
  */
-static isr_ctx_t isr_ctx[ISR_NUMOF];
+static gpio_isr_ctx_t isr_ctx[ISR_NUMOF];
 
 
 static msp_port_t *_port(gpio_t pin)

cpu/nrf51/periph/gpio.c

@@ -29,18 +29,10 @@
 #include "periph/gpio.h"
 #include "periph_conf.h"
 
-/**
- * @brief   Datastructure to hold an interrupt context
- */
-typedef struct {
-    void (*cb)(void *arg);      /**< interrupt callback routine */
-    void *arg;                  /**< optional argument */
-} exti_ctx_t;
-
 /**
  * @brief   Place to store the interrupt context
  */
-static exti_ctx_t exti_chan;
+static gpio_isr_ctx_t exti_chan;
 
 int gpio_init(gpio_t pin, gpio_dir_t dir, gpio_pp_t pullup)
 {

cpu/sam3/periph/gpio.c

@@ -42,18 +42,10 @@
  */
 #define CTX_NUMOF           (7U)
 
-/**
- * @brief Context information needed for interrupts
- */
-typedef struct {
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} exti_ctx_t;
-
 /**
  * @brief Allocation of memory for 7 independent interrupt slots
  */
-static exti_ctx_t exti_ctx[CTX_NUMOF] = {
+static gpio_isr_ctx_t exti_ctx[CTX_NUMOF] = {
     {NULL, NULL}, {NULL, NULL}, {NULL, NULL}, {NULL, NULL},
     {NULL, NULL}, {NULL, NULL}, {NULL, NULL}
 };

cpu/samd21/periph/gpio.c

@@ -44,18 +44,10 @@ static const int8_t exti_config[2][32] = {
       0,  1, -1, -1, -1, -1,  6,  7, -1, -1, -1, 15,  8, -1, 10, 11},
 };
 
-/**
- * @brief   Datatype to use for saving the interrupt contexts
- */
-typedef struct {
-    gpio_cb_t cb;       /**< callback to call on GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_exti_t;
-
 /**
  * @brief   Hold one interrupt context per interrupt line
  */
-static gpio_exti_t gpio_config[NUMOF_IRQS];
+static gpio_isr_ctx_t gpio_config[NUMOF_IRQS];
 
 static inline PortGroup *_port(gpio_t pin)
 {

cpu/saml21/periph/gpio.c

@@ -51,12 +51,7 @@ static const int8_t exti_config[2][32] = {
       0,  1, -1, -1, -1, -1,  6,  7, -1, -1, -1, -1, -1, -1, 14, 15},
 };
 
-typedef struct {
+static gpio_isr_ctx_t gpio_config[NUMOF_IRQS];
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_state_t;
-
-static gpio_state_t gpio_config[NUMOF_IRQS];
 
 
 static inline PortGroup *_port(gpio_t pin)

cpu/stm32f0/periph/gpio.c

@@ -24,12 +24,7 @@
 #include "periph/gpio.h"
 #include "periph_conf.h"
 
-typedef struct {
+static gpio_isr_ctx_t gpio_config[GPIO_NUMOF];
-    gpio_cb_t cb;
-    void *arg;
-} gpio_state_t;
-
-static gpio_state_t gpio_config[GPIO_NUMOF];
 
 /* static port mappings */
 static GPIO_TypeDef *const gpio_port_map[GPIO_NUMOF] = {

cpu/stm32f1/periph/gpio.c

@@ -35,15 +35,10 @@
  */
 #define GPIO_ISR_CHAN_NUMOF             (16U)
 
-typedef struct {
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} exti_ctx_t;
-
 /**
  * @brief   Allocate memory for one callback and argument per EXTI channel
  */
-static exti_ctx_t exti_ctx[GPIO_ISR_CHAN_NUMOF];
+static gpio_isr_ctx_t exti_ctx[GPIO_ISR_CHAN_NUMOF];
 
 /**
  * @brief   Extract the pin's port base address from the given pin identifier

cpu/stm32f3/periph/gpio.c

@@ -32,18 +32,10 @@
  */
 #define EXTI_NUMOF      (16U)
 
-/**
- * @brief   Datastructure to hold an interrupt context
- */
-typedef struct {
-    gpio_cb_t cb;       /**< callback called from GPIO interrupt */
-    void *arg;          /**< argument passed to the callback */
-} gpio_state_t;
-
 /**
  * @brief   Hold one callback function pointer for each interrupt line
  */
-static gpio_state_t exti_chan[EXTI_NUMOF];
+static gpio_isr_ctx_t exti_chan[EXTI_NUMOF];
 
 /**
  * @brief   Extract the port base address from the given pin identifier

cpu/stm32f4/periph/gpio.c

@@ -30,18 +30,10 @@
  */
 #define GPIO_ISR_CHAN_NUMOF             (16U)
 
-/**
- * @brief   Datastructure to hold an interrupt context
- */
-typedef struct {
-    void (*cb)(void *arg);      /**< interrupt callback routine */
-    void *arg;                  /**< optional argument */
-} exti_ctx_t;
-
 /**
  * @brief   Hold one callback function pointer for each interrupt line
  */
-static exti_ctx_t exti_chan[GPIO_ISR_CHAN_NUMOF];
+static gpio_isr_ctx_t exti_chan[GPIO_ISR_CHAN_NUMOF];
 
 /**
  * @brief   Extract the port base address from the given pin identifier

cpu/stm32l1/periph/gpio.c

@@ -26,23 +26,15 @@
 #include "periph/gpio.h"
 #include "periph_conf.h"
 
-#/**
+/**
  * @brief   Number of available external interrupt lines
  */
 #define GPIO_ISR_CHAN_NUMOF             (16U)
 
-/**
- * @brief   Datastructure to hold an interrupt context
- */
-typedef struct {
-    void (*cb)(void *arg);      /**< interrupt callback routine */
-    void *arg;                  /**< optional argument */
-} exti_ctx_t;
-
 /**
  * @brief   Hold one callback function pointer for each interrupt line
  */
-static exti_ctx_t exti_chan[GPIO_ISR_CHAN_NUMOF];
+static gpio_isr_ctx_t exti_chan[GPIO_ISR_CHAN_NUMOF];
 
 /**
  * @brief   Extract the port base address from the given pin identifier