riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

boards/same54-xpro: use new GCLK names

Browse Source
This commit is contained in:
Benjamin Valentin 2020-06-16 17:43:41 +02:00 committed by Benjamin Valentin
parent fba3aab2f3
commit cd76c95560
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
boards/same54-xpro/include/periph_conf.h
View File

@ -81,7 +81,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBAMASK.reg,
.mclk_mask = MCLK_APBAMASK_TC0 | MCLK_APBAMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = SAM0_GCLK_8MHZ,
.gclk_src = SAM0_GCLK_TIMER,
.flags = TC_CTRLA_MODE_COUNT32,
},
{ /* Timer 1 */
@ -90,7 +90,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBBMASK.reg,
.mclk_mask = MCLK_APBBMASK_TC2 | MCLK_APBBMASK_TC3,
.gclk_id = TC2_GCLK_ID,
.gclk_src = SAM0_GCLK_8MHZ,
.gclk_src = SAM0_GCLK_TIMER,
.flags = TC_CTRLA_MODE_COUNT32,
}
};
@ -123,7 +123,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
},
{ /* EXT1 */
.dev = &SERCOM0->USART,
@ -137,7 +137,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
},
{ /* EXT2 */
.dev = &SERCOM5->USART,
@ -151,7 +151,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
},
{ /* EXT3 */
.dev = &SERCOM1->USART,
@ -165,7 +165,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
}
};
@ -200,7 +200,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
#ifdef MODULE_PERIPH_DMA
.tx_trigger = SERCOM4_DMAC_ID_TX,
.rx_trigger = SERCOM4_DMAC_ID_RX,
@ -239,7 +239,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 23),
.sda_pin = GPIO_PIN(PA, 22),
.mux = GPIO_MUX_C,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
.flags = I2C_FLAG_NONE
},
{ /* EXT2, EXT3 */
@ -248,7 +248,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PD, 9),
.sda_pin = GPIO_PIN(PD, 8),
.mux = GPIO_MUX_C,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
.flags = I2C_FLAG_NONE
}
};
@ -275,7 +275,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_H,
.device = &USB->DEVICE,
.gclk_src = SAM0_GCLK_48MHZ,
.gclk_src = SAM0_GCLK_PERIPH,
}
};
/** @} */
@ -285,7 +285,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
* @{
*/
/* Must not exceed 12 MHz */
#define DAC_CLOCK SAM0_GCLK_8MHZ
#define DAC_CLOCK SAM0_GCLK_TIMER
/* Use external reference voltage on PA03 */
/* (You have to manually connect PA03 with Vcc) */
/* Internal reference only gives 1V */