boards/remote-revb: fix broken links
This commit is contained in:
Gunar Schorcht
parent
d71c38d825
commit
e41e9b565f
@ -73,7 +73,7 @@ Else install from <https://launchpad.net/gcc-arm-embedded>
|
|||||||
Drivers
|
Drivers
|
||||||
-------
|
-------
|
||||||
The RE-Mote features a CP2104 serial-to-USB module, the driver is commonly found in most OS, but if required it can be downloaded
|
The RE-Mote features a CP2104 serial-to-USB module, the driver is commonly found in most OS, but if required it can be downloaded
|
||||||
from <https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx>
|
from <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>
|
||||||
|
|
||||||
|
|
||||||
### For the CC2538EM (USB CDC-ACM)
|
### For the CC2538EM (USB CDC-ACM)
|
||||||
@ -108,10 +108,10 @@ More Reading
|
|||||||
============
|
============
|
||||||
1. [Zolertia RE-Mote website][remote-site]
|
1. [Zolertia RE-Mote website][remote-site]
|
||||||
2. [Zolertia Wiki page][zolertia-wiki]
|
2. [Zolertia Wiki page][zolertia-wiki]
|
||||||
2. [CC2538 System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee applications (SWRU319B)][cc2538]
|
3. [CC2538 System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee applications (SWRU319B)][cc2538]
|
||||||
3. [CC1200 sub-1GHz RF transceiver][cc1200]
|
4. [CC1200 sub-1GHz RF transceiver][cc1200]
|
||||||
|
|
||||||
[remote-site]: https://zolertia.io/product/re-mote-suite/ "Zolertia RE-Mote"
|
[remote-site]: https://zolertia.io/product/re-mote/ "Zolertia RE-Mote"
|
||||||
[zolertia-wiki]: https://github.com/Zolertia/Resources/wiki
|
[zolertia-wiki]: https://github.com/Zolertia/Resources/wiki
|
||||||
[cc1200]: http://www.ti.com/product/cc1200 "CC1200"
|
[cc1200]: http://www.ti.com/product/cc1200 "CC1200"
|
||||||
[cc2538]: http://www.ti.com/product/cc2538 "CC2538"
|
[cc2538]: http://www.ti.com/product/cc2538 "CC2538"
|
||||||
|
|||||||
@ -2,4 +2,88 @@
|
|||||||
@defgroup boards_remote-revb RE-Mote Revision B
|
@defgroup boards_remote-revb RE-Mote Revision B
|
||||||
@ingroup boards
|
@ingroup boards
|
||||||
@brief Support for the RE-Mote board Revision B
|
@brief Support for the RE-Mote board Revision B
|
||||||
|
|
||||||
|
The `RE-Mote` has three versions, a first prototype A (`remote-pa`) only
|
||||||
|
distributed to beta testers, its following revision A (`remote-reva`), and the
|
||||||
|
latest revision B (`remote-revb`) which are commercially available. The
|
||||||
|
following section focuses on the revision A.
|
||||||
|
|
||||||
|
The official RE-Mote wiki page is maintained by Zolertia at:
|
||||||
|
|
||||||
|
https://github.com/Zolertia/Resources/wiki
|
||||||
|
|
||||||
|
# Components
|
||||||
|
|
||||||
|
| MCU | [CC2538 (ARM Cortex-M3 with on-board 2.4GHz radio)](http://www.ti.com/product/CC2538) |
|
||||||
|
|-------|-----------------------------------------------------------------------------------------------------|
|
||||||
|
| Radio | Two radio interfaces (IEEE 802.15.4): [2.4GHz](http://www.ti.com/product/CC2538) and [863-950MHz](http://www.ti.com/product/CC1200) |
|
||||||
|
| | RP-SMA connector for external antenna (with a RF switch to select either 2.4GHz/Sub-GHz radio) |
|
||||||
|
| USB-to-Serial | [CP2104](https://www.silabs.com/documents/public/data-sheets/cp2104.pdf) |
|
||||||
|
| Peripherals | RTCC, built-in battery charger for LiPo batteries, External WDT (optional), Micro-SD |
|
||||||
|
| Others | RGB LED, power management block (150nA when the mote is shutdown)|
|
||||||
|
|
||||||
|
# Porting status
|
||||||
|
|
||||||
|
In terms of hardware support, the following drivers have been implemented
|
||||||
|
for CC2538 System-on-Chip:
|
||||||
|
|
||||||
|
- UART
|
||||||
|
- Random number generator
|
||||||
|
- Low Power Modes
|
||||||
|
- General-Purpose Timers
|
||||||
|
- I2C/SPI library
|
||||||
|
- LEDs
|
||||||
|
- Buttons
|
||||||
|
- RF 2.4GHz built-in in CC2538
|
||||||
|
- RF switch to programmatically drive either 2.4GHz or sub-1GHz to a single
|
||||||
|
RP-SMA
|
||||||
|
|
||||||
|
And under work or pending at CC2538 base CPU:
|
||||||
|
|
||||||
|
- Built-in core temperature and battery sensor.
|
||||||
|
- CC1200 sub-1GHz radio interface.
|
||||||
|
- Micro-SD external storage.
|
||||||
|
- ADC
|
||||||
|
- USB (in CDC-ACM).
|
||||||
|
- uDMA Controller.
|
||||||
|
|
||||||
|
# Layout
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Flashing
|
||||||
|
|
||||||
|
The RE-Mote has built-in support to flash over USB using the BSL. Previous
|
||||||
|
versions required to unlock the bootloader by manually pressing the `user
|
||||||
|
button` and `reset button`, but the current version handles the sequence with an
|
||||||
|
on-board PIC, so automatically unlocks the bootloader upon flashing.
|
||||||
|
|
||||||
|
e.g.
|
||||||
|
```
|
||||||
|
Bash
|
||||||
|
$ make BOARD=remote-reva flash
|
||||||
|
```
|
||||||
|
|
||||||
|
The RE-Mote in its current Revision A has the following pin-out:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Pin out and connectors
|
||||||
|
|
||||||
|
## RE-Mote ports and connectors
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## RE-Mote on-board connectors pin-out
|
||||||
|
|
||||||
|
The RE-Mote uses the [Molex 5-pin WM4903-ND male header connector](http://datasheets.globalspec.com/ds/5843/DigiKey/6D12815C-098E-40A3-86A0-22A3C50B75BA) to
|
||||||
|
connect digital sensors based on I2C and SPI protocols, as well as other sensors
|
||||||
|
or actuators you may need to connect. The pins are 2.54 mm spaced and the
|
||||||
|
connector has the following pin-out:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
*/
|
*/
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user