[backport] Release notes of 2017.10

release-notes.txt

@@ -1,3 +1,262 @@
+RIOT-2017.10 - Release Notes
+============================
+RIOT is a multi-threading operating system which enables soft real-time
+capabilities and comes with support for a range of devices that are typically
+found in the Internet of Things: 8-bit microcontrollers, 16-bit
+microcontrollers and light-weight 32-bit processors.
+
+RIOT is based on the following design principles: energy-efficiency, soft
+real-time capabilities, small memory footprint, modularity, and uniform API
+access, independent of the underlying hardware (with partial POSIX compliance).
+
+RIOT is developed by an international open-source community which is
+independent of specific vendors (e.g. similarly to the Linux community) and is
+licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
+business models around the free open-source software platform provided by RIOT.
+
+About this release:
+===================
+Most notable, this release is bringing RIOT a step closer to supporting
+over-the-air-updates by containing initial support for MCUBoot.
+Furthermore, it adds support for some new platforms (e.g. arduino-mkzero,
+nucleos, and frdm-k22f), drivers (e.g. my9221, apa102, ds1307), and of course
+a large number of bug fixes (e.g. `make buildtest` now working properly,
+various fixes to `xtimer`).
+
+About 390 pull requests with about 500 commits have been merged since the last
+release and about 60 issues have been solved. 39 people contributed with code
+in 113 days. 1825 files have been touched with 223454 insertions and 66146 deletions.
+
+Notations used below:
+=====================
++ means new feature/item
+* means modified feature/item
+- means removed feature/item
+
+New features and changes
+========================
+
+Bootloader
+-----------
++ MCUBoot: A secure bootloader for ARM MCUs is now supported. This initial support
+includes only the nrf52dk board. For more information about it refer to the mcuboot github
+page at https://github.com/runtimeco/mcuboot/blob/master/README-RIOT.rst
+
+System libraries
+----------------
++ bcd: binary coded decimal en/decoder
+
+Networking
+----------
++ gcoap: Add URI-query strings for requests + various fixes
+
+Packages
+--------
+* lwip: Updated to v2.0.3
+
+Boards
+------
++ NXP frdm-k22f
++ STM nucleo144-f722
++ Arduino arduino-mkzero
++ ti CC2650 LaunchPad
+- weio
+
+CPU
+---
++ NXP k22f
++ cc2538: ADC
++ stm32l4: RTC
++ samr21e18a
++ msp430: added flashpage driver
+- lpc11u34
+* stm32: unified stmclk implementations, reworked RTC
+* sam0: heavy unification and refactoring, updated vendor headers
++ sam_common: started unification of sam0 and sam3
+* cortexm: interrupt vector cleanup
+
+Device Drivers
+--------------
++ my9221 - LED controller + Seeed Studio Grove LED bar
++ apa102 - RGB LED
++ ds1307: RTC
++ SAUL support: lps331ap
+* SAUL gpio: allow configuration of initial state and low-active signals
+* sdcard_spi: added mtd interface
+* PM: fixed selection of default implementations for `pm_off` and `pm_set_lowest`
+
+Build System / Tooling
+------------
++ make: added pkt-prepare target
+* gcc: enabled `-fdiagnostics-color` per default for `arm` and `native` targets
+* edbg: use as default flash tool for sam0-based boards
++ added LOSTANDFOUND.md for listing removed features
+
+Fixed Issues from the last 3 releases (known issues missing in 2017.04 and 2017.07)
+===================================================================================
+#2006: cpu/nrf51822: timer callback may be fired too early
+#4841: xtimer: timer already in the list:
+#4590: pkg: building relic with clang fails.
+#4694: drivers/lm75a: does not build
+#4902: xtimer: xtimer_set: xtimer_set does not handle integer overflows well
+#5128: make: buildtest breaks when exporting FEATURES_PROVIDED var
+#5207: make: buildest fails with board dependent application Makefiles
+#5361: cpu/cc26x0: timer broken
+#5460: cpu/samd21: i2c timing with compiler optimization
+#5489: cpu/lpc11u34: ADC broken
+#5799: kw2x: 15.4 duplicate transmits
+#5928: xtimer: usage in board_init() crashes: some boards use the xtimer in there board_init()
+       function. The xtimer is however first initialized in the auto_init module which is executed
+       after board_init()
+#6022: pkg: build order issue
+#6331: RTC alarm triggered with 1s delay
+#6419: cpu/cc2538: timer broken
+#6427: xtimer: infinite loop with xtimer_mutex_lock_timeout
+#6501: boards/nucleo: Pin usage collision (SPI clk vs. LED0)
+#6542: boards/nucle-f0xx: misconfigured timer configuration
+#6904: cpu/saml21: cannot use several EXTI
+
+Known Issues
+============
+Networking related issues
+-------------------------
+#3075: nhdp: unnecessary microsecond precision: NHDP works with timer values of microsecond precision
+       which is not required. Changing to lower precision would save some memory.
+#4048: gnrc: potential racey memory leak
+#5016: gnrc_rpl: Rejoining RPL instance as root after reboot messes up routing
+#5230: gnrc ipv6: multicast packets are not dispatched to the upper layers
+#5656: Possible Weakness with locking in the GNRC network stack: For some operations mutexes to the
+       network interfaces need to get unlocked in the current implementation to not get deadlocked.
+       Recursive mutexes as provided in #5731 might help to solve this problem.
+#5748: gnrc: nodes crashing with too small packet buffer: A packet buffer of size ~512 B might lead
+       to crashes. The issue describes this for several hundret nodes, but agressive flooding with
+       just two nodes was also shown to lead to this problem.
+#5858: gnrc: 6lo: potential problem with reassembly of fragments: If one frame gets lost the reassembly
+       state machine might get out of sync
+#6123: gnrc: crash with (excessive) traffic
+#6519: driver/mrf24j40: broken on stm32f4discovery
+#7035: lwIP: hangs due to sema change after a while
+#7727: pkg: libcoap is partially broken and outdated
+
+NDP is not working properly
+---------------------------
+#4499: handle of l2src_len in gnrc_ndp_rtr_sol_handle: Reception of a router solicitation might lead
+       to invalid zero-length link-layer addresses in neighbor cache.
+#5005: ndp: router advertisement sent with global address: Under some  circumstances a router might
+       send RAs with GUAs. While they are ignored on receive (as RFC-4861 specifies), RAs should have
+       link-local addresses and not even be send out this way.
+#5122: NDP: global unicast address on non-6LBR nodes disappears after a while: Several issues
+       (also see #5760) lead to a global unicast address effectively being banned from the network
+       (disappears from neighbor cache, is not added again)
+#5467: ipv6 address vanishes when ARO (wrongly) indicates DUP caused by outdated ncache at router
+#5539: Border Router: packet not forwarded from ethos to interface 6
+#5790: ND: Lost of Global IPV6 on node after sending lot of UDP frame from BR
+
+Timer related issues
+--------------------
+#5338: xtimer: xtimer_now() not ISR safe for non-32-bit platforms.
+#6052: tests: xtimer_drift gets stuck: xtimer_drift application freezes after ~30-200 seconds
+#6502: cpu/stm32l1: RTC broken
+#7114: xtimer: add's items to the wrong list if the timer overflows between _xtimer_now() and irq_disable()
+
+native related issues
+---------------------
+#495:  native not float safe: When the FPU is used when an asynchronous context switch occurs, either
+       the stack gets corrupted or a floating point exception occurs.
+#2175: ubjson: valgind registers "Invalid write of size 4" in unittests
+#5796: native: tlsf: early malloc will lead to a crash: TLSF needs pools to be initialized (which is
+       currently expected to be done in an application). If a malloc is needed before an application's
+       main started (e.g. driver initialization) the node can crash, since no pool is allocated yet.
+#6145: native: system reboots on SIGTRAP
+#6442: cpu/native: timer interrupt does not yield thread
+#7206: native: race-condition in IPC
+
+other platform related issues
+-----------------------------
+#1891: newlib-nano: Printf formatting does not work properly for some numeric types: PRI[uxdi]64,
+       PRI[uxdi]8 and float are not parsed in newlib-nano
+#2143: unittests: tests-core doesn't compile for all platforms: GCC build-ins were used in the
+       unittests which are not available with msp430-gcc
+#2300: qemu unittest fails because of a page fault
+#4512: pkg: tests: RELIC unittests fail on iotlab-m3
+#4560: make: clang is more pedantic than gcc oonf_api is not building with clang (partly fixed by #4593)
+#4822: kw2xrf: packet loss when packets get fragmented
+#4876: at86rf2xx: Simultaneous use of different transceiver types is not supported
+#4954: chronos: compiling with -O0 breaks
+#4866: not all GPIO driver implementations are thread safe: Due to non-atomic operations in the drivers
+       some pin configurations might get lost.
+#5009: RIOT is saw-toothing in energy consumption (even when idling)
+#5103: xtimer: weird behavior of tests/xtimer_drift: xtimer_drift randomly jumps a few seconds on nrf52
+#5405: Eratic timings on iotlab-m3 with compression context activated
+#5486: at86rf2xx: lost interrupts
+#5678: at86rf2xx: failed assertion in _isr
+#5944: msp430: ipv6_hdr unittests fail
+#5848: arduino: Race condition in sys/arduino/Makefile.include
+#6018: nRF52 gnrc 6lowpan ble memory leak
+#6261: SAMD21 TC3 & TC4 issue when using TCC2
+#6379: nrf52dk/nordic_soft_device: not working anymore
+#6437: periph/spi: Leftovers from SPI rework
+#6526: atmega based boards freeze when main thread is over
+#6836: Issuing a reboot on ATmega328p makes the board loop-reboot
+#7347: xtimer_usleep stuck for small values on nucleo-l1
+#7753: pic32-wifire: race-condition when linking in concurrent build
+#7846: stm32f1: I2C read functions return bogus values with unconnected devices
+
+other issues
+------------
+#1263: TLSF implementation contains (a) read-before-write error(s).
+#3256: make: Setting constants on compile time doesn't really set them everywhere
+#3366: periph/i2c: handle NACK
+#4488: Making the newlib thread-safe: When calling puts/printf after thread_create(), the CPU hangs
+       for DMA enabled uart drivers.
+#4866: periph: GPIO drivers are not thread safe
+#5561: C++11 extensions in header files
+#5776: make: Predefining CFLAGS are parsed weirdly
+#5863: OSX +  SAMR21-xpro: shell cannot handle command inputs larger than 64 chars
+#5962: Makefile: UNDEF variable is not working as documented
+#6451: Wrong value in SRF08 driver
+#7800: CBOR is broken
+
+Special Thanks
+==============
+We would like to give our special thanks to all the companies that provided us
+with their hardware for porting and testing, namely the people from (in alphabeticalorder):
+Atmel, Freescale, Imagination Technologies, Nordic, OpenMote, Phytec, SiLabs, UDOO,
+and Zolertia;
+and also companies that directly sponsored development time:
+Cisco Systems, Eïsox, Eistec, Ell-i, Engineering Spirit, Mesotic, Nordic, OTA keys and Phytec.
+We also would like to thank people from Inria Chile for their work on
+OpenThread integration and Semtech LoRa drivers.
+
+More information
+================
+http://www.riot-os.org
+
+Mailing lists
+-------------
+* RIOT OS kernel developers list
+  devel@riot-os.org (http://lists.riot-os.org/mailman/listinfo/devel)
+* RIOT OS users list
+  users@riot-os.org (http://lists.riot-os.org/mailman/listinfo/users)
+* RIOT commits
+  commits@riot-os.org (http://lists.riot-os.org/mailman/listinfo/commits)
+* Github notifications
+  notifications@riot-os.org (http://lists.riot-os.org/mailman/listinfo/notifications)
+
+IRC
+---
+* Join the RIOT IRC channel at: irc.freenode.net, #riot-os
+
+License
+=======
+* The code developed by the RIOT community is licensed under the GNU Lesser General Public
+  License (LGPL) version 2.1 as published by the Free Software Foundation.
+* Some external sources and pkg are published under a separate license.
+
+All code files contain licensing information.
+
+
+
 RIOT-2017.07 - Release Notes
 ============================
 RIOT is a multi-threading operating system which enables soft real-time
@@ -149,7 +408,6 @@ All code files contain licensing information.
 
 
 
-
 RIOT-2017.04 - Release Notes
 ============================
 RIOT is a multi-threading operating system which enables soft real-time