riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
RIOT/drivers
History
Benjamin Valentin 477938e46e drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices 
The MRF24J40MC/MD/ME modules contain an external power amplifier &
low noise amplifier that has to be enabled manually by setting three bits
in the TESTMODE register.
On MRF24J40MC the power amplifier is powered by a separate voltage regualtor
that has to be enabled by setting GPIO3 to HIGH.

During Sleep and CCA the PA should be disabled.

Co-authored-by: Carton <joel.carron@eeproperty.ch>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2019-05-23 11:07:04 +02:00
..
ad7746
drivers: adcxx1c, ads101x, ad7746: Change I2C macro to DEV
2019-04-08 14:08:07 +02:00
adcxx1c
drivers: adcxx1c, ads101x, ad7746: Change I2C macro to DEV
2019-04-08 14:08:07 +02:00
ads101x
drivers: adcxx1c, ads101x, ad7746: Change I2C macro to DEV
2019-04-08 14:08:07 +02:00
adt7310
drivers/adt7310: Replace binary representation
2019-04-25 21:18:36 +02:00
adxl345
drivers/adxk345: include copy of params in dev struct
2019-01-06 17:24:24 +01:00
apa102
drivers/apa102: do normal assignment instead of memcpy
2019-01-10 19:43:43 +01:00
at
Merge pull request #11267 from cladmi/pr/isrpipe/separate_read_timeout
2019-03-26 22:27:15 +01:00
at30tse75x
drivers/at30tse75x: adapt to new I2C api
2018-07-25 12:01:38 +02:00
at86rf2xx
at86rf2xx: don't call tx_load when iol->iol_len == 0
2019-03-15 15:34:38 +01:00
ata8520e
drivers/ata8520e: do normal assignment instead of memcpy
2019-01-10 19:43:43 +01:00
bh1750fvi
drivers/bh1750fvi: change prototype of bh1750fvi_init
2019-01-07 21:37:02 +01:00
bmp180
drivers/bmp180: fix conversion
2019-03-18 09:43:39 +01:00
bmx055
drivers/bmx055: do normal assignment instead of memcpy
2019-01-10 19:43:43 +01:00
bmx280
drivers: bmx280: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
can_trx
drivers/can: fix doxygen documentation + typo
2017-07-03 20:43:51 +02:00
cc1xxx_common
netdev: remove layer2 netstats from netdev drivers
2019-02-01 11:25:27 +02:00
cc110x
drivers/cc110x: Use NETOPT_MAX_DPU_SIZE
2019-02-18 20:18:54 +01:00
cc2420
drivers/cc2420: don't append to FIFO if iol->iol_len == 0
2019-04-02 16:00:03 +02:00
ccs811
drivers/ccs811: remove unnecessary casts
2019-01-06 14:41:47 +01:00
dht
drivers/dht: do normal assignment instead of memcpy
2019-01-10 19:43:43 +01:00
ds18
drivers/ds18: fix ds18_read with negative temperatures
2019-05-16 20:12:22 +02:00
ds75lx
drivers: sys: add SAUL support for ds75lx sensor
2019-05-22 16:54:20 +02:00
ds1307
drivers/ds1307: remove unused clock param
2018-07-25 12:01:40 +02:00
ds3234
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
2019-02-19 11:57:40 +01:00
dsp0401
boards/nucleo-f411re: rename to marketing name
2018-05-22 21:52:41 +02:00
dynamixel
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
enc28j60
drivers/enc28j60: Allow sending with empty chunks
2019-03-20 09:57:45 +01:00
encx24j600
drivers/encx24j600: Allow empty iolist elements
2019-04-01 16:51:39 +02:00
ethos
Merge pull request #9890 from bergzand/pr/ethos/sync
2018-11-14 22:41:52 +01:00
feetech
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
fxos8700
drivers/fxos8700: adapt to new i2c API
2018-07-25 12:01:38 +02:00
grove_ledbar
drivers/grove_ledbar: use new driver params scheme
2018-03-01 13:42:06 +01:00
hd44780
drivers/hd44780: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
hdc1000
drivers/hdc1000: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
hih6130
drivers/hih6130: adapt to new i2c API
2018-07-25 12:01:40 +02:00
hts221
drivers/hts211: fix CTRL_REG2_OS_EN
2019-02-14 18:03:35 +01:00
ina220
drivers/ina220: adapt to new I2C api
2018-07-25 12:01:38 +02:00
include
drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices
2019-05-23 11:07:04 +02:00
io1_xplained
drivers/io1_xplained: adapt to at30tse75x new init api
2018-07-25 12:01:39 +02:00
isl29020
drivers: replace memset by simple assignments
2019-01-07 21:59:25 +01:00
isl29125
drivers/isl29125: adapt to new i2c API
2018-07-25 12:01:38 +02:00
jc42
drivers/jc42: adapt to new i2c API
2018-07-25 12:01:39 +02:00
kw2xrf
netdev: remove layer2 netstats from netdev drivers
2019-02-01 11:25:27 +02:00
l3g4200d
drivers/l3g4200d: fix typo in src file header
2018-09-26 11:00:48 +02:00
lc709203f
drivers/lc709203f: adapt to new i2c API
2018-07-25 12:01:40 +02:00
lis2dh12
drivers/lis2dh12: add SAUL mapping
2018-01-18 18:39:43 +01:00
lis3dh
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
lis3mdl
drivers/lis3mdl: adapt to new i2c API
2018-07-25 12:01:39 +02:00
lpd8808
drivers/lpd8808: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
lpsxxx
drivers/lpsxxx: add support for lps22hb
2019-03-20 14:43:37 +01:00
lsm6dsl
drivers/lsm6dsl: eliminate and correct casts
2019-01-06 16:56:17 +01:00
lsm303dlhc
drivers/lsm303dlhc: correct cast of phydat_t*
2019-01-06 17:08:04 +01:00
ltc4150
drivers/ltc4150: Allow tracking last minute charge
2019-01-28 13:45:45 +01:00
mag3110
drivers/mag3110: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
mma8x5x
drivers/mma8x5x: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
mma7660
drivers/mma7660: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
motor_driver
drivers: add licence to motor_driver source files
2019-04-13 00:29:58 +02:00
mpl3115a2
drivers/mpl3115a2: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
mpu9150
drivers/mpu9150: correct cast of phydat_t*
2019-01-06 18:14:53 +01:00
mq3
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
mrf24j40
drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices
2019-05-23 11:07:04 +02:00
mtd
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
mtd_sdcard
mtd_sdcard: fix printf format strings
2018-08-06 12:19:44 +02:00
mtd_spi_nor
mtd_spi_nor: add 4-byte address flash support
2018-05-14 15:05:24 +02:00
my9221
drivers/my9221: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
netdev_eth
drivers/netdev_eth: Use NETOPT_MAX_DPU_SIZE
2019-02-18 20:18:56 +01:00
netdev_ieee802154
drivers/netdev_ieee802154: add mac header filter
2019-03-04 13:21:43 +01:00
netdev_layer
netdev_layer: initial import of layered netdev API
2018-03-28 11:19:09 +02:00
nrf24l01p
make: enable Wall and Wextra by default, and optionally Wpedantic
2017-11-28 20:33:39 +01:00
nvram
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
nvram_spi
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
pcd8544
drivers/pcd8544: replace char by uint8_t for bytes
2019-04-25 23:42:30 +02:00
periph_common
drivers/periph_common/gpio_util: introduce gpio_util_shiftin()
2019-04-18 07:09:32 +02:00
pir
drivers: replace memset by simple assignments
2019-01-07 21:59:25 +01:00
pn532
driver: fix cppcheck error in pn532
2018-07-25 12:01:39 +02:00
pulse_counter
drivers/pulse_counter: refactor the prototypes of read funcs
2019-01-09 23:06:54 +01:00
rgbled
drivers/rgbled: fix PWM resolution
2017-11-10 15:53:50 +01:00
rn2xx3
drivers/rn2xx3: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
saul
drivers/saul: Add capacitance and voltage types
2019-02-15 13:37:45 +01:00
sdcard_spi
drivers/sdcard_spi: Use uint8_t for byte values
2019-04-29 19:25:34 +02:00
sds011
drivers/sds011: Fix SAUL read error return
2019-01-31 15:35:19 +01:00
servo
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
sht1x
sht1x: Fix Wimplicit-fallthrough warning
2018-08-14 10:05:15 +02:00
sht2x
drivers: add support for SHT2x (I2C temp and humidity sensor)
2019-02-05 22:17:30 +01:00
sht3x
drivers: add SHT3X humidity/temperature sensor
2018-11-21 08:48:20 +01:00
si70xx
drivers/si70xx: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
si114x
drivers/si114x: adapt to new i2c api
2018-07-25 12:01:38 +02:00
slipdev
drivers/slipdev: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
soft_spi
drivers/soft_spi: use new driver params scheme
2018-03-07 15:23:12 +01:00
srf02
drivers/srf02: Update to new i2c API
2018-07-25 12:01:38 +02:00
srf04
doc: fix undocumented define in srf04 driver
2019-01-18 07:03:54 +01:00
srf08
drivers/srf08: Turn debug off and cleanup
2018-07-25 12:01:38 +02:00
sx127x
Merge pull request #11316 from fjmolinas/pr_sx127x_switch
2019-04-10 18:40:37 +02:00
tcs37727
drivers/tcs37727: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
tja1042
tja1042: add driver for tja1042 CAN transceiver
2018-01-18 09:27:10 +01:00
tmp006
drivers/tmp006: do normal assignment instead of memcpy
2019-01-10 19:43:44 +01:00
tps6274x
drivers: Initial support for TPS6274x converter
2019-01-10 00:00:02 +01:00
tsl2561
drivers/tsl2561: add missing acquire∕release functions
2018-09-14 14:10:08 +02:00
tsl4531x
sys/auto_init: Changes to support SAUL
2018-10-23 17:26:28 +02:00
uart_half_duplex
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
vcnl40x0
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
veml6070
drivers/veml6070: adapt to new I2C api
2018-07-25 12:01:38 +02:00
w5100
Merge pull request #10412 from maribu/w5100
2019-02-05 16:30:42 +01:00
xbee
drivers/xbee: prevent 0 length packet sent to UART
2019-04-02 16:47:13 +02:00
doc.txt
drivers: Initial support for TPS6274x converter
2019-01-10 00:00:02 +01:00
Makefile
make: replace curly braces with parenthesis
2018-03-22 20:43:15 +01:00
Makefile.dep
drivers/ds75lx: add basic driver
2019-05-22 16:54:19 +02:00
Makefile.include
drivers/ds75lx: add basic driver
2019-05-22 16:54:19 +02:00