History

Gerson Fernando Budke 6475620290 tests: Exclude atxmega-a1u-xpro board due low mem

Add atxmega-a1u-xpro board to BOARD_INSUFFICIENT_MEMORY list to
exclude test since boards don't have enough data memory.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>

2021-03-15 20:16:10 -03:00

main.c

tests/driver_xbee: use common netdev test

2020-03-28 18:02:09 +01:00

Makefile

tests: use driver_netdev_common Makefile.netdev.mk instead of Makefile

2020-08-27 11:46:25 +02:00

Makefile.ci

tests: Exclude atxmega-a1u-xpro board due low mem

2021-03-15 20:16:10 -03:00

README.md

boards/cpu/drivers/sys: use generic stdio_ if

2018-08-22 10:54:25 +02:00

README.md

About

This is a manual test application for testing the Xbee S1 network device driver.

For running this test, you need to connect the following pins of a Xbee S1 module to your board:

UART RX
UART TX
VCC (3V3)
GND

NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine STDIO_UART_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.

Usage

For testing the Xbee driver you can use the netif shell commands that are included in this application.