History

Yegor Yefremov 2673b662af tests/periph_uart: add tests for uart_mode

Add positive and negative tests for data bits, stop bits and parity:

- 7E1, 7O1
- 8E1, 8O1
- 8N2

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>

2019-01-31 14:15:20 +01:00

periph_uart_if.py

tests/periph_uart: add tests for uart_mode

2019-01-31 14:15:20 +01:00

README.md

doc: Add deprecation warnings for new repos

2018-08-25 10:34:32 +02:00

test.py

tests/periph_uart: add tests for uart_mode

2019-01-31 14:15:20 +01:00

README.md

deprecated: BPT is renamed to PHiLIP, more information found here

How To Run

Connect the DUT (device under test) UART6 to the BPT (bluepill tester). Information for BPT setup can be found here.

Example Test With Nucleo-F401RE

Flash the periph_uart firmware on the nucleo-f401 with make BOARD=nucleo-f401 flash in the periph_uart directory
Connect the BPT to the cpu using a USB to Serial converter
(BPT IF_TX = PA9)
(BPT IF_RX = PA10)
Connect the BPT to the DUT
(DUT RX/PA12 <=> BPT TX3/PB10)
(DUT TX/PA11 <=> BPT RX3/PB11)
test.py requires the path to $RIOTBASE/dist/tests to be added to PYTHONPATH environment variable. Either modify PYTHONPATH permanently in the .bashrc or modify it temporary before invocation:
PYTHONPATH=$PYTHONPATH:$RIOTBASE/dist/tests python3 test.py
Run the test.py from the periph_uart/tests directory (with various options)
python3 test.py for python 3
python3 test.py --log=DEBUG to see all debug messages
python3 test.py --dut_port="/dev/ttyACM0" to specify the port
python3 test.py --log=DEBUG --dut_port="/dev/ttyACM0" --dut_uart=6 --bpt_port="/dev/ttyACM1" > nucleo-f401_test.txt for all the fix'ns

Flags

--log=DEBUG -> allows for debug output
--dut_port -> the port name of the DUT
--dut_uart -> DUT UART number to test
--bpt_port -> the port name of the BPT