Thomas Eichinger 103c426cdc drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception ...

First start calculating the CRC in hardware when receiving a frame.

Then, other than the at86rf2xx transceivers the cc2420 don't consider the
CRC_OK flag when reporting a successful packet reception. This change
introduces a check for this bit and drops the packet else by flushing
the RX FIFO.

2016-11-08 23:28:09 -08:00

..

adt7310

drivers: adapted gpio_init(_x)() calls

2016-03-17 14:55:30 +01:00

at30tse75x

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

at86rf2xx

drivers/at86rf2xx: prevent a possible race condition after state change

2016-11-04 09:52:35 -07:00

bh1750fvi

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

bmp180

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

cc110x

cpu: drivers: adapt devices for netdev2 parameter type change

2016-08-03 12:30:51 +02:00

cc2420

drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception

2016-11-08 23:28:09 -08:00

dht

drivers/dht: fix variableScope

2016-09-05 02:15:51 +02:00

enc28j60

cpu: drivers: adapt devices for netdev2 parameter type change

2016-08-03 12:30:51 +02:00

encx24j600

cpu: drivers: adapt devices for netdev2 parameter type change

2016-08-03 12:30:51 +02:00

ethos

debug: add missing line breaks

2016-09-27 23:38:41 +02:00

hdc1000

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

hih6130

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

ina220

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

include

drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception

2016-11-08 23:28:09 -08:00

io1_xplained

drivers/io1_xplained: initial implementation including temperature/LED/GPIO and auto init

2016-09-02 10:42:09 +02:00

isl29020

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

isl29125

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

kw2xrf

kw2xrf: set tx_power in gnrc_netdev_t

2016-09-16 10:52:53 +02:00

l3g4200d

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

lis3dh

drivers: adapted gpio_init(_x)() calls

2016-03-17 14:55:30 +01:00

lis3mdl

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

lm75a

drivers/lm75a: removed LED_xx_yy calls

2016-03-15 18:37:54 +01:00

lpd8808

drivers: added driver for LPD8808 LED strips

2016-10-25 18:32:52 +02:00

lps331ap

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

lsm303dlhc

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

ltc4150

drivers: ltc4150: use xtimer

2015-09-16 10:58:52 +02:00

mag3110

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

mma8652

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

mpl3115a2

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

mpu9150

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

mq3

drivers/mq3: adapted to ADC driver changes

2016-03-14 13:06:24 +01:00

netdev2_eth

netdev2: introduce linklayer netstats

2016-03-29 22:34:09 +02:00

netdev2_ieee802154

Implement NETOPT_ACK_REQ configuration option.

2016-06-01 10:11:28 +12:00

nrf24l01p

all: remove pointer casts for msg.content.ptr

2016-06-02 23:13:42 +02:00

nvram_spi

drivers/nvram: Add const to write source buffer declaration

2016-07-12 08:03:16 +02:00

pcd8544

drivers: adapted gpio_init(_x)() calls

2016-03-17 14:55:30 +01:00

periph_common

drivers/periph_common: added spi_transfer_byte()

2016-10-17 16:58:26 +02:00

pir

debug: add missing line breaks

2016-09-27 23:38:41 +02:00

rgbled

drivers: added rgbled driver

2014-06-11 20:17:44 +02:00

saul

sys/saul: Add analog inputs to SAUL via periph/adc

2016-04-08 10:18:12 +02:00

servo

drivers/servo: adapted to PWM interface changes

2016-02-12 16:10:01 +01:00

sht11

drivers: sht11: use xtimer

2015-09-16 10:58:52 +02:00

si70xx

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

srf02

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

srf08

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

tcs37727

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

tmp006

periph/i2c: convert char to uint8_t where applicapable

2016-10-04 20:26:39 +02:00

w5100

drivers: added driver for W5100 Ethernet chips

2016-10-26 08:36:58 +02:00

xbee

drivers/xbee: encryption support

2016-04-20 17:43:09 +02:00

doc.txt

drivers: various doxygen fixes

2015-11-23 12:15:50 +01:00

Makefile

make: remove superfluous nrf24l01p from Makefile

2015-09-18 06:53:24 +02:00

Makefile.dep

drivers: added driver for W5100 Ethernet chips

2016-10-26 08:36:58 +02:00

Makefile.include

drivers: added driver for W5100 Ethernet chips

2016-10-26 08:36:58 +02:00