riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
RIOT/sys/shell/commands/shell_commands.c
Erik Ekman eab317749f sys/shell: Add lwIP ifconfig shell command 
Lists state, link type, v4/v6 addresses.
Currently read-only.

Using lwIP debug system to print addresses, to limit dependencies
and work with dual stack setup. Most other code seems to only
allow either v4 or v6 networking. For that to compile I
had to change the `SZT_F` format string due to this error:
```
error: format '%lu' expects argument of type 'long unsigned int',
but argument 2 has type 'size_t {aka unsigned int}'
```
Switching to the lwIP default format string here.

Outputs the following on my ESP32 board with Ethernet,
when both v4 and v6 are enabled in examples/paho-mqtt:
```
> ifconfig
Iface ET0 HWaddr: 24:0a:c4:e6:0e:9f Link: up State: up
        Link type: wired
        inet addr: 10.4.4.81 mask: 255.255.254.0 gw: 10.4.4.1
        inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9f scope: link
        inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9f scope: global
Iface ET1 HWaddr: 24:0a:c4:e6:0e:9c Link: up State: up
        Link type: wireless
        inet addr: 10.4.4.82 mask: 255.255.254.0 gw: 10.4.4.1
        inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9c scope: link
        inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9c scope: global
>
```
2021-02-23 11:47:45 +01:00

344 lines
9.9 KiB
C
Raw Blame History

/*
* Copyright (C) 2014 INRIA.
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup sys_shell_commands
* @{
*
* @file
* @brief Provides prototypes and sets up available shell commands
*
* @author Oliver Hahm <oliver.hahm@inria.fr>
* @author Zakaria Kasmi <zkasmi@inf.fu-berlin.de>
* @author Ludwig Knüpfer <ludwig.knuepfer@fu-berlin.de>
*
* @}
*/
#include <stdlib.h>
#include "shell_commands.h"
extern int _reboot_handler(int argc, char **argv);
extern int _version_handler(int argc, char **argv);
#ifdef MODULE_CONFIG
extern int _id_handler(int argc, char **argv);
#endif
#ifdef MODULE_DFPLAYER
extern int _sc_dfplayer(int argc, char **argv);
#endif
#ifdef MODULE_HEAP_CMD
extern int _heap_handler(int argc, char **argv);
#endif
#ifdef MODULE_PERIPH_PM
extern int _pm_handler(int argc, char **argv);
#endif
#ifdef MODULE_PS
extern int _ps_handler(int argc, char **argv);
#endif
#ifdef MODULE_SHT1X
extern int _get_temperature_handler(int argc, char **argv);
extern int _get_humidity_handler(int argc, char **argv);
extern int _get_weather_handler(int argc, char **argv);
extern int _sht_config_handler(int argc, char **argv);
#endif
#ifdef MODULE_AT30TSE75X
extern int _at30tse75x_handler(int argc, char **argv);
#endif
#ifdef MODULE_SAUL_REG
extern int _saul(int argc, char **argv);
#endif
#ifdef MODULE_PERIPH_RTC
extern int _rtc_handler(int argc, char **argv);
#endif
#ifdef MODULE_RTT_CMD
extern int _rtt_handler(int argc, char **argv);
#endif
#ifdef MODULE_MCI
extern int _get_sectorsize(int argc, char **argv);
extern int _get_blocksize(int argc, char **argv);
extern int _get_sectorcount(int argc, char **argv);
extern int _read_sector(int argc, char **argv);
extern int _read_bytes(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_ICMPV6_ECHO
#ifdef MODULE_XTIMER
extern int _gnrc_icmpv6_ping(int argc, char **argv);
#endif
#endif
#ifdef MODULE_RANDOM
extern int _random_init(int argc, char **argv);
extern int _random_get(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_IPV6_NIB
extern int _gnrc_ipv6_nib(int argc, char **argv);
#endif
#ifdef MODULE_NETSTATS_NEIGHBOR
extern int _netstats_nb(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_NETIF
extern int _gnrc_netif_config(int argc, char **argv);
#ifdef MODULE_GNRC_TXTSND
extern int _gnrc_netif_send(int argc, char **argv);
#endif
#endif
#ifdef MODULE_OPENWSN
extern int _openwsn_ifconfig(int argc, char **argv);
extern int _openwsn_handler(int argc, char **argv);
#endif
#ifdef MODULE_LWIP_NETIF
extern int _lwip_netif_config(int argc, char **argv);
#endif
#ifdef MODULE_FIB
extern int _fib_route_handler(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_IPV6_EXT_FRAG_STATS
extern int _gnrc_ipv6_frag_stats(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_IPV6_WHITELIST
extern int _whitelist(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_IPV6_BLACKLIST
extern int _blacklist(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_PKTBUF_CMD
extern int _gnrc_pktbuf_cmd(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_RPL
extern int _gnrc_rpl(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_SIXLOWPAN_CTX
extern int _gnrc_6ctx(int argc, char **argv);
#endif
#ifdef MODULE_GNRC_SIXLOWPAN_FRAG_STATS
extern int _gnrc_6lo_frag_stats(int argc, char **argv);
#endif
#ifdef MODULE_CCN_LITE_UTILS
extern int _ccnl_open(int argc, char **argv);
extern int _ccnl_content(int argc, char **argv);
extern int _ccnl_interest(int argc, char **argv);
extern int _ccnl_fib(int argc, char **argv);
#endif
#ifdef MODULE_SNTP
extern int _ntpdate(int argc, char **argv);
#endif
#ifdef MODULE_VFS
extern int _vfs_handler(int argc, char **argv);
extern int _ls_handler(int argc, char **argv);
#endif
#ifdef MODULE_CONN_CAN
extern int _can_handler(int argc, char **argv);
#endif
#ifdef MODULE_CORD_EP
extern int _cord_ep_handler(int argc, char **argv);
#endif
#ifdef MODULE_APP_METADATA
extern int _app_metadata_handler(int argc, char **argv);
#endif
#ifdef MODULE_I2C_SCAN
extern int _i2c_scan(int argc, char **argv);
#endif
#ifdef MODULE_SEMTECH_LORAMAC
extern int _loramac_handler(int argc, char **argv);
#endif
#ifdef MODULE_NIMBLE_NETIF
extern int _nimble_netif_handler(int argc, char **argv);
#endif
#ifdef MODULE_NIMBLE_STATCONN
extern int _nimble_statconn_handler(int argc, char **argv);
#endif
#ifdef MODULE_SUIT_TRANSPORT_COAP
extern int _suit_handler(int argc, char **argv);
#endif
#ifdef MODULE_CRYPTOAUTHLIB
extern int _cryptoauth(int argc, char **argv);
#endif
#ifdef MODULE_USB_BOARD_RESET
extern int _bootloader_handler(int argc, char **argv);
#endif
const shell_command_t _shell_command_list[] = {
{"reboot", "Reboot the node", _reboot_handler},
{"version", "Prints current RIOT_VERSION", _version_handler},
#ifdef MODULE_USB_BOARD_RESET
{"bootloader", "Reboot to bootloader", _bootloader_handler},
#endif
#ifdef MODULE_CONFIG
{"id", "Gets or sets the node's id.", _id_handler},
#endif
#ifdef MODULE_HEAP_CMD
{"heap", "Prints heap statistics.", _heap_handler},
#endif
#ifdef MODULE_PERIPH_PM
{ "pm", "interact with layered PM subsystem", _pm_handler },
#endif
#ifdef MODULE_PS
{"ps", "Prints information about running threads.", _ps_handler},
#endif
#ifdef MODULE_SHT1X
{"temp", "Prints measured temperature.", _get_temperature_handler},
{"hum", "Prints measured humidity.", _get_humidity_handler},
{"weather", "Prints measured humidity and temperature.", _get_weather_handler},
{"sht-config", "Get/set SHT10/11/15 sensor configuration.", _sht_config_handler},
#endif
#ifdef MODULE_AT30TSE75X
{"at30tse75x", "Test AT30TSE75X temperature sensor", _at30tse75x_handler},
#endif
#ifdef MODULE_MCI
{DISK_READ_SECTOR_CMD, "Reads the specified sector of inserted memory card", _read_sector},
{DISK_READ_BYTES_CMD, "Reads the specified bytes from inserted memory card", _read_bytes},
{DISK_GET_SECTOR_SIZE, "Get the sector size of inserted memory card", _get_sectorsize},
{DISK_GET_SECTOR_COUNT, "Get the sector count of inserted memory card", _get_sectorcount},
{DISK_GET_BLOCK_SIZE, "Get the block size of inserted memory card", _get_blocksize},
#endif
#ifdef MODULE_GNRC_ICMPV6_ECHO
#ifdef MODULE_XTIMER
{ "ping6", "Ping via ICMPv6", _gnrc_icmpv6_ping },
{ "ping", "Alias for ping6", _gnrc_icmpv6_ping },
#endif
#endif
#ifdef MODULE_RANDOM
{ "random_init", "initializes the PRNG", _random_init },
{ "random_get", "returns 32 bit of pseudo randomness", _random_get },
#endif
#ifdef MODULE_PERIPH_RTC
{"rtc", "control RTC peripheral interface", _rtc_handler},
#endif
#ifdef MODULE_RTT_CMD
{"rtt", "control RTC peripheral interface", _rtt_handler},
#endif
#ifdef MODULE_GNRC_IPV6_NIB
{"nib", "Configure neighbor information base", _gnrc_ipv6_nib},
#endif
#ifdef MODULE_NETSTATS_NEIGHBOR
{"neigh", "Show neighbor statistics", _netstats_nb},
#endif
#ifdef MODULE_GNRC_NETIF
{"ifconfig", "Configure network interfaces", _gnrc_netif_config},
#ifdef MODULE_GNRC_TXTSND
{"txtsnd", "Sends a custom string as is over the link layer", _gnrc_netif_send },
#endif
#endif
#ifdef MODULE_OPENWSN
{"ifconfig", "Shows assigned IPv6 addresses", _openwsn_ifconfig},
{"openwsn", "OpenWSN commands", _openwsn_handler},
#endif
#ifdef MODULE_LWIP_NETIF
{"ifconfig", "List network interfaces", _lwip_netif_config},
#endif
#ifdef MODULE_FIB
{"fibroute", "Manipulate the FIB (info: 'fibroute [add|del]')", _fib_route_handler},
#endif
#ifdef MODULE_GNRC_IPV6_EXT_FRAG_STATS
{"ip6_frag", "IPv6 fragmentation statistics", _gnrc_ipv6_frag_stats },
#endif
#ifdef MODULE_GNRC_IPV6_WHITELIST
{"whitelist", "whitelists an address for receival ('whitelist [add|del|help]')", _whitelist },
#endif
#ifdef MODULE_GNRC_IPV6_BLACKLIST
{"blacklist", "blacklists an address for receival ('blacklist [add|del|help]')", _blacklist },
#endif
#ifdef MODULE_GNRC_PKTBUF_CMD
{"pktbuf", "prints internal stats of the packet buffer", _gnrc_pktbuf_cmd },
#endif
#ifdef MODULE_GNRC_RPL
{"rpl", "rpl configuration tool ('rpl help' for more information)", _gnrc_rpl },
#endif
#ifdef MODULE_GNRC_SIXLOWPAN_CTX
{"6ctx", "6LoWPAN context configuration tool", _gnrc_6ctx },
#endif
#ifdef MODULE_GNRC_SIXLOWPAN_FRAG_STATS
{"6lo_frag", "6LoWPAN fragment statistics", _gnrc_6lo_frag_stats },
#endif
#ifdef MODULE_SAUL_REG
{"saul", "interact with sensors and actuators using SAUL", _saul },
#endif
#ifdef MODULE_CCN_LITE_UTILS
{ "ccnl_open", "opens an interface or socket", _ccnl_open },
{ "ccnl_int", "sends an interest", _ccnl_interest },
{ "ccnl_cs", "shows CS or creates content and populates it", _ccnl_content },
{ "ccnl_fib", "shows or modifies the CCN-Lite FIB", _ccnl_fib },
#endif
#ifdef MODULE_SNTP
{ "ntpdate", "synchronizes with a remote time server", _ntpdate },
#endif
#ifdef MODULE_VFS
{"vfs", "virtual file system operations", _vfs_handler},
{"ls", "list files", _ls_handler},
#endif
#ifdef MODULE_CONN_CAN
{"can", "CAN commands", _can_handler},
#endif
#ifdef MODULE_CORD_EP
{"cord_ep", "Resource directory endpoint commands", _cord_ep_handler },
#endif
#ifdef MODULE_APP_METADATA
{"app_metadata", "Returns application metadata", _app_metadata_handler },
#endif
#ifdef MODULE_I2C_SCAN
{ "i2c_scan", "Performs an I2C bus scan", _i2c_scan },
#endif
#ifdef MODULE_SEMTECH_LORAMAC
{"loramac", "Control Semtech loramac stack", _loramac_handler},
#endif
#ifdef MODULE_NIMBLE_NETIF
{ "ble", "Manage BLE connections for NimBLE", _nimble_netif_handler },
#endif
#ifdef MODULE_NIMBLE_STATCONN
{ "statconn", "NimBLE netif statconn", _nimble_statconn_handler},
#endif
#ifdef MODULE_SUIT_TRANSPORT_COAP
{ "suit", "Trigger a SUIT firmware update", _suit_handler },
#endif
#ifdef MODULE_CRYPTOAUTHLIB
{ "cryptoauth", "Commands for Microchip CryptoAuth devices", _cryptoauth },
#endif
#ifdef MODULE_DFPLAYER
{"dfplayer", "Control a DFPlayer Mini MP3 player", _sc_dfplayer},
#endif
{NULL, NULL, NULL}
};
Reference in New Issue View Git Blame Copy Permalink