RIOT/boards/arduino-nano-33-ble-sense/doc.md

@defgroup boards_arduino-nano-33-ble-sense Arduino Nano 33 BLE sense @ingroup boards @brief Support for the Arduino Nano 33 BLE Sense

General information

The Arduino Nano 33 BLE sense board is an opensource, micro development kit using the nRF52840 SoC. This board provides 802.15.4 and BLE connectivity.

Pinout

Flash the board

Use BOARD=arduino-nano-33-ble-sense with the make command.
Example with hello-world application:

    make BOARD=arduino-nano-33-ble-sense -C examples/basic/hello-world flash

Accessing STDIO via UART

The STDIO is directly accessible via the USB port. On a Linux host, it's generally mapped to /dev/ttyACM0.

Use the term target to connect to the board serial port

    make BOARD=arduino-nano-33-ble-sense -C examples/basic/hello-world term

Internal devices

Supported

• hts221 (Temperature and Humidity sensor)
• apds9960 (Proximity, ambient light and gesture sensor)
• lps22hb (Pressure and Temperature sensor)

Not yet supported

• LSM9DS1 (9-axis inertial module - Accelerometer)
• MP34DT06JTR (Microphone)

### Hardware reference

• https://docs.arduino.cc/resources/pinouts/ABX00031-full-pinout.pdf