kaspar/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-12-18 11:03:50 +01:00
Code Releases Activity
RIOT/boards/mbed_lpc1768/doc.md

3.7 KiB
Raw Blame History

@defgroup boards_mbed_lpc1768 mbed LPC1768 development kit @ingroup boards @brief Support for the mbed LPC1768 board

Overview

mbed LPC1768 is a small development board by ARM. A LPC1768, an Ethernet PHY transceiver (DP83848J), a 2MB flash device (AT45DB161D) and a MBED-IF01 (LPC2148) are present on the board. This board aims to make it very easy to flash a new firmware. There is no need for an external programmer. The sole purpose of the MBED-IF01 is to appear as a USB flash drive when the board is connected over USB to a computer. The most recent binary file stored on the USB drive is flashed on the next reset.

See here for more information about the board.

Hardware

MCU

MCU LPC1768FDB100
Family ARM Cortex-M3
Vendor NXP
RAM 64KiB SRAM
Flash 512KiB
Frequency up to 100MHz
Timers 4
UARTs 4
SPIs 2
I2Cs 3
CAN 2
PWM 6
USB Host/Device 1
Ethernet 1
RTC 1
ADC 8 (all 12-bit)
Vcc 2.4V - 3.6V
Datasheet Datasheet
User Manual User Manual

User Interface

1 Button:

NAME SW1
Pin RESET

5 LEDs:

NAME LED1 LED2 LED3 LED4 STATUS
Color blue blue blue blue blue
Pin P1.18 P1.20 P1.21 P1.23 N/A

Status LED is not controlled by the LPC1768.

Implementation Status

Device ID Supported Comments
MCU lpc1768 yes
Low-level driver GPIO yes
ADC no
PWM no
UART yes
I2C no
SPI no
USB no
Ethernet no
RTT no
RTC no
Timer yes

Using UART

This board opens a serial interface through the USB automatically.

Supported Toolchains

For using the mbed LPC1768 board we strongly recommend the usage of the GNU Tools for ARM Embedded Processors toolchain.

Flashing the device

The easiest way to flash the device is to connect to the board via USB. The board appears as a 2MB usb drive. make flash will copy your binary file to the root directory but you need to manually reset your board by pressing the reset button. While the LPC1768 is flashed by the MBED-IF01 with the new firmware, the status LED blinks fast.

Known Issues