2.3 KiB
@defgroup boards_nucleo-f042k6 STM32 Nucleo-F042K6 @ingroup boards_common_nucleo32 @brief Support for the STM32 Nucleo-F042K6
Overview
The Nucleo-F042K6 is a board from ST's Nucleo family supporting ARM Cortex-M0 STM32F042K6 microcontroller with 6KiB of RAM and 32KiB of Flash.
Pinout
@image html pinouts/nucleo-f031k6-and-more.svg "Pinout for the Nucleo-F042K6 (from ST User Manual, UM1956, https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf, page 31)" width=25%
MCU
| MCU | STM32F042K6 |
|---|---|
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 6KiB |
| Flash | 32KiB |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 9 (5x 16-bit, 1x 32, 1x Systick, 2x Watchdog) |
| ADC | 1x 12-bit (10 channels) |
| UARTs | 2 (two USARTs) |
| SPIs | 1 |
| CANs | 1 |
| RTC | 1 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Flashing the Board Using ST-LINK Removable Media
On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:
make BOARD=nucleo-f042k6 PROGRAMMER=cpy2remed flash
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.