mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-12-21 12:33:49 +01:00
3.3 KiB
3.3 KiB
@defgroup boards_telosb TelosB @ingroup boards @brief Support for the TelosB board
MCU
| MCU | TI MSP430F1611 |
|---|---|
| Family | MSP430 |
| Vendor | Texas Instruments |
| Package | 64 QFN |
| RAM | 10 KiB |
| Flash | 48 KiB |
| Frequency | 8 MHz |
| FPU | no |
| Timers | 2 (2 × 16 bit) |
| ADCs | 1 × 8 channel 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet (Board) | Tmote Sky / TelosB Datasheet |
| Datasheet (MCU) | Datasheet |
| User Guide (MCU) | User Guide |
Radio
| RF Chip | Texas Instruments® CC2420 |
|---|---|
| Frequency Band | 2.4GHz ~ 2.485GHz |
| Standard compliance | IEEE 802.15.4 compliant |
| Receive Sensitivity | -95 dBm typical |
| Transfer Rate | 250 Kbps |
| RF Power | -25 dBm ~ 0 dBm |
| Range | ~120 m (outdoor), 20 ~ 30 m (indoor) |
| Current Draw | RX: 18.8 mA TX: 17.4 mA Sleep mode: 1 μA |
| RF Power Supply | 2.1 V ~ 3.6 V |
| Antenna | Dipole Antenna / PCB Antenna |
| Datasheet | Datasheet |
Flashing RIOT
Flashing RIOT on the TelosB is quite straight forward, just connect your board using the USB connector to your host computer and type:
make flash
This should take care of everything!
Using the shell
The shell is using the UART interface of the TelosB at 9600 baud.