2.2 KiB
@defgroup boards_nucleo-u575zi-q STM32 Nucleo-U575ZI-Q @ingroup boards_common_nucleo144 @brief Support for the STM32 Nucleo-U575ZI-Q
Overview
The Nucleo-U575ZI-Q is a board from ST's Nucleo family supporting the ARM Cortex-M33 STM32U575ZIT6Q ultra-low-power microcontroller with TrustZone, 768KiB of RAM and 2MiB of Flash.
You can find general information about the Nucleo64 boards on the @ref boards_common_nucleo64 page.
Hardware
MCU
| MCU | STM32U575ZIT6Q |
|---|---|
| Family | ARM Cortex-M33 |
| Vendor | ST Microelectronics |
| RAM | 786KiB |
| Flash | 2MiB |
| Frequency | up tp 160MHz |
| FPU | yes |
| TrustZone | yes |
| Timers | 17 |
| UARTs | 6 (3xUSART, 2xUART, 1xLPUART) |
| I2Cs | 4 |
| SPIs | 3 |
| CAN | 1 |
| Datasheet | Datasheet |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Flashing the Board
A detailed description about the flashing process can be found on the
guides page.
The board name for the Nucleo-U575ZI-Q is nucleo-u575zi-q.
Accessing RIOT shell
Default RIOT shell access utilize VCP (Virtual COM Port) via USB interface, provided by integrated ST-LINK programmer. ST-LINK is connected to the microcontroller USART1.
The default baud rate is 115 200.
If a physical connection to USART1 is needed, connect UART interface to pins PA9 (USART1 TX) and PA10 (USART1 RX).