2.3 KiB
@defgroup boards_nucleo-f746zg STM32 Nucleo-F746ZG @ingroup boards_common_nucleo144 @brief Support for the STM32 Nucleo-F746ZG
Overview
The Nucleo-F746ZG is a board from ST's Nucleo family supporting ARM Cortex-M7 STM32F746ZG microcontroller with 320KiB of RAM and 1 MiB of Flash.
Pinout
@image html pinouts/nucleo-f207zg-and-more.svg "Pinout for the Nucleo-F746ZG (from STM user manual, UM1974, http://www.st.com/resource/en/user_manual/dm00244518.pdf, page 32)" width=50%
MCU
| MCU | STM32F746ZG |
|---|---|
| Family | ARM Cortex-M7 |
| Vendor | ST Microelectronics |
| RAM | 320KiB |
| Flash | 1MiB |
| Frequency | up to 216MHz |
| FPU | yes |
| Timers | 18 (12x 16-bit, 2x 32, 1x RTC, 1x Systick, 2x Watchdog) |
| ADC | 3x 12-bit (24 channels) |
| UARTs | 4 (four USARTs/UARTs) |
| SPIs | 6 |
| CANs | 2 |
| RTC | 1 |
| I2Cs | 4 |
| Vcc | 1.7V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Flashing the Board Using ST-LINK Removable Media
On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:
make BOARD=nucleo-f746zg PROGRAMMER=cpy2remed flash
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.