1.4 KiB
@defgroup cpu_esp32_esp_eth ESP32 Ethernet netdev interface @ingroup cpu_esp32 @brief ESP32 ethernet network device driver
This module realizes a netdev interface using the ESP32 Ethernet MAC module.
@author Gunar Schorcht gunar@schorcht.net
ESP32 provides an Ethernet MAC layer module (EMAC) according to the IEEE 802.3 standard which can be used together with an external physical layer chip (PHY) to realize a 100/10 Mbps Ethernet interface. Supported PHY chips are the Microchip LAN8710/LAN8720, the IC Plus 101G, and the Texas Instruments TLK110.
The RIOT port for ESP32 realizes with module esp_eth a netdev driver for the EMAC which uses RIOT's standard Ethernet interface.
If the board has one of the supported PHY layer chips connected to the ESP32, the esp_eth module should be enabled by default in board's Makefile.dep when module netdev_default is used.
ifneq (,$(filter netdev_default,$(USEMODULE)))
USEMODULE += esp_eth
endif
Otherwise, the application has to add the esp_eth module in its makefile when needed.
@note The board has to have one of the supported PHY modules to be able to use the Ethernet MAC module.