riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

boards: add pinout ref for pba-d-01-kw2x

Browse Source
This commit is contained in:
Sebastian Meiling 2020-02-18 09:42:46 +01:00
parent 9866cdd411
commit a9cb3b637f
1 changed files with 35 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
boards/pba-d-01-kw2x/doc.txt
View File

@ -31,7 +31,41 @@ phyNODE board with equipped phyWAVE-KW2x processor/radio-module.
The PCB-pieces with the mounted sensors can be separated from the evaluation The PCB-pieces with the mounted sensors can be separated from the evaluation
board to capture sensor values from specific spatial points. board to capture sensor values from specific spatial points.
[Pinout reference](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Interfaces) ### Pinout Reference
The board features an Arduino like header connector to mount shields. The
spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly.
The pinout below shows the vendor specific naming and functionality.
The actual pin configuration of the board for RIOT can be found in
[periph_conf.h](https://github.com/RIOT-OS/RIOT/blob/master/boards/pba-d-01-kw2x/include/periph_conf.h).
@note Not all signals and pins are compatible with Arduino Uno R3.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_X1____________________
| D15 |___DIO21, PE19, I2C0 SCL
| D14 |___DIO20, PE18, I2C0 SDA
| AREF |___AREF, VCC3V3
| GND3 |___GND
X___| RESERVED D13 |___DIO3, PC5, SPI0 SCK
VCC3V3___| IOREF D12 |___DIO5, PC7, SPI0 MISO
nRESET___| RST TGTMCU D11 |___DIO4, PC6, SPI0 MOSI
VCC3V3___| P3V3 D10 |___DIO2, PC4, SPI0 CS0
P5V USB OUT___| P5V USB D9 |___DIO9, PD4, PWM
GND_________| GND2 D8 |___DIO6, PD1
\___| GND1 |
X___| P5_9V VIN D7 |___DIO24, PA1, PWM, TDI2
| D6 |___DIO25, PA2, PWM, TDO2
DIO15, PE2, ADC ___| A0 D5 |___DIO11, PD6, PWM
DIO16, PE3, ADC, TDO1 ___| A1 D4 |___DIO29, PA19, TCLKIN
DIO12, PD7, ADC ___| A2 D3 |___DIO27, PA4, PWM
DIO10, PD5, ADC ___| A3 D2 |___DIO17, PE4, LLWU, TDI1
DIO13, PE0, ADC, I2CSDA ___| A4 D1 |___DIO8, PD3, UART2 TX
DIO14, PE1, ADC, I2CSCL ___| A5 D0 |___DIO7, PD2, UART2 RX
-----------------------
Arduino Uno R3 Connector
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
## Implementation Status ## Implementation Status