riot-ci/RIOT
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
18,413 Commits 120 Branches 131 Tags
Commit Graph

105 Commits

Author SHA1 Message Date
Alexandre Abadie
4e1f07b895
Merge pull request #8475 from aabadie/pr/common-stlink 
boards/stm32: use common place of openocd config files for all boards using stlink
 2018-06-28 15:13:48 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring 
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
  board can overwrite default settings by #defining SHT1X_PARAM_CLK and
  SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
  arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
  calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
  temperature result (and use that information to calculate the correct
  temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
  temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
  more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
  sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
  is implemented in the new configuration command
 2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x 
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
 2018-06-27 08:57:58 +02:00
Alexandre Abadie
de15af4c87 boards/common/stm32-link: add common place for stlink 
- introduce common place for boards using stlink: same serial, all use openocd
- apply this to nucleos
 2018-06-26 20:45:23 +02:00
Gaëtan Harter
9d891c7b75
wsn430: IoT-LAB requires the HEXFILE for flashing 2018-06-15 15:37:21 +02:00
Alexandre Abadie
d8c3e1da4e
Merge pull request #8549 from haukepetersen/opt_boards_stm32-clk-f4-180 
boards/stm32-based: use shared configuration snippets
 2018-06-12 20:48:01 +02:00
Alexandre Abadie
6bc494b928 boards: fix doxygen grouping 2018-06-11 19:12:02 +02:00
Marian Buschsieweke
bb6d0e304c
boards: Added module boards_common_stm32f103c8 & refactored bluepill 
- Moved common code for STM32F103C8 based boards to the new module
- Updated board `bluepill` to use the new module
 2018-06-04 08:52:23 +02:00
Martine Lenders
3f1cf7d5ee common_wsn430: rename board.h to board_common.h 
Since wsn430-v1_3b and wsn430-v1_4 do have different radio
configurations we need to separate `board.h` for them, so this moves
their currently common `board.h` to `board_common.h` to be included by
later introduced `board.h`
 2018-05-29 21:22:29 +02:00
Alexandre Abadie
5897cf09cc
Merge pull request #9133 from aabadie/pr/boards/riottools 
boards: use RIOTTOOLS variable
 2018-05-28 17:02:43 +02:00
Hauke Petersen
079f3c08d4 boards/stm32f4-based: use shared 168MHz clock conf 2018-05-24 19:00:42 +02:00
Hauke Petersen
cc90edc373 boards/stm32: use shared 180MHz clock config 2018-05-24 19:00:42 +02:00
Hauke Petersen
3182ad21e6 boards/stm32: add shared spi divtable header 2018-05-24 19:00:42 +02:00
Hauke Petersen
e18f518023 boards: add path for STM32-shared config snippets 2018-05-24 19:00:42 +02:00
Alexandre Abadie
ac00b81e24 boards/nucleo-l496zg: add initial support 2018-05-15 11:56:51 +02:00
Alexandre Abadie
cb991cd47d boards: use RIOTTOOLS variable 2018-05-15 11:23:44 +02:00
Koen Zandberg
3f1657ffbb
Merge pull request #8952 from ZetaR60/RIOT_atmega_graceful_clock 
boards/common/atmega: gracefully handle CKDIV8 fuse
 2018-05-14 16:11:17 +02:00
Kaspar Schleiser
bb60b3e040
Merge pull request #9074 from haukepetersen/opt_nrf5x_nrfminfeature 
cpu/nrf5x: define nrfmin feature in nrf5x_common
 2018-05-12 02:18:31 +02:00
Alexandre Abadie
3474d052b9 boards/iotlab: fix saul gpio configuration 
take into account inversion of LEDs and initialize them cleared
 2018-05-04 15:07:20 +02:00
Hauke Petersen
9815697b3e cpu/nrf5x: define nrfmin feature in nrf5x_common 2018-05-04 13:47:46 +02:00
Matthew Blue
2979626ef6 boards/common/atmega: gracefully handle CKDIV8 fuse 2018-05-02 14:05:33 -04:00
Matthew Blue
a6ef6ddbfd boards/common/arduino-atmega: remove context swap defines 2018-04-27 14:13:34 -04:00
Alexandre Abadie
22aa6b9cc5
Merge pull request #8962 from aabadie/pr/boards/doxygen_cleanup 
boards*: cleanup doxygen
 2018-04-24 10:56:00 +02:00
Kaspar Schleiser
7f62fd83ed boards/arduino-atmega: don't provide arduino for jiminy-mega256rfr2 2018-04-20 16:23:17 +02:00
Alexandre Abadie
70802fc652 boards*: cleanup doxygen 
- replace brief with name where required
- remove some unwanted empty lines
- fix missing closing doxygen name block
 2018-04-18 12:08:56 +02:00
Alexandre Abadie
479ee51649
Merge pull request #8807 from kYc0o/fix_f4_backoff 
nucleo-f4xx: increase xtimer backoff to 7 for F4 family
 2018-04-10 15:26:14 +02:00
Francisco Acosta
7b16b8a994 boards/common/nucleo: increase backoff to 8 for F4 family 2018-04-10 15:15:55 +02:00
cladmi
3f145413f5 boards/makefiles: Remove '-Otype' from OFLAGS 
* Remove '-Oihex' and '-Obinary' from OFLAGS for all boards
  It is now provided by the Makefile.include rule.
 2018-04-09 17:32:46 +02:00
Alexandre Abadie
d7bf2c112e
Merge pull request #7491 from aabadie/nucleo_l433 
boards/nucleo-l433rc: initial support
 2018-04-07 21:12:14 +02:00
Hauke Petersen
ceb76403f4 boards/nrf52xxxdk: add Skald dependencies 2018-04-06 11:18:53 +02:00
Hauke Petersen
2c01034088 boards/nrf52xxxdk: added BLE radio features 2018-04-06 11:18:53 +02:00
Francisco Acosta
69f4d632e3
Merge pull request #8837 from kaspar030/refactor_atmega_stdio 
cpu/atmega: refactor stdio init code
 2018-04-03 15:56:33 +03:00
Kaspar Schleiser
60a55eb06d boards/common/arduino-atmega: use common/atmega shared code 2018-04-03 14:18:32 +02:00
Kaspar Schleiser
ae8822ff46 boards/common/atmega: initial commit of atmega shared code 2018-04-03 14:18:32 +02:00
Sebastian Meiling
ee3196a6b6
Merge pull request #8726 from smlng/remote/add_uart1 
boards: add UART1 config for Zolertia Remotes
 2018-03-29 14:22:23 +02:00
Gaëtan Harter
fff5810191 Makefile.include: FIX .DEFAULT_GOAL not being all 
.DEFAULT_GOAL was reset many times which removed 'all' from being the default
goal.
By chance it was then set to `link` so was working by some magic.
 2018-03-28 16:59:00 +02:00
Gaëtan Harter
72ddc72f2b make: cleanup HEXFILE/ELFFILE/BINFILE 
* Use the existing variable when possible
* Remove duplicate definition
* Remove unused BINFILE variable
 2018-03-27 16:02:48 +02:00
Alexandre Abadie
61f1b941ce make: replace curly braces with parenthesis 2018-03-22 20:43:15 +01:00
Alexandre Abadie
e05fe7f60a boards/common/nucleo64: specific cases for nucleo-l433 2018-03-21 17:07:28 +01:00
Alexandre Abadie
1c90210277 boards/nucleo-l433rc: initial basic support 2018-03-21 17:07:28 +01:00
Francisco Acosta
a0017e3eb7
Merge pull request #8763 from aabadie/pr/boards/nucleo-l1-xtimer-backoff 
boards/nucleo-l152: increase xtimer backoff
 2018-03-20 18:33:48 +01:00
Bas Stottelaar
3bcb3f6d9e board: common/silabs, sltb001a: add conditional include 2018-03-16 22:17:54 +01:00
Alexandre Abadie
912e107d23 boards/nucleo-l152: increase xtimer backoff 2018-03-09 09:28:25 +01:00
Martine Lenders
6ca74fa145
Merge pull request #8708 from aabadie/boards/params/iotlab 
boards/iotlab*: fix driver params usage
 2018-03-08 14:02:51 +01:00
Joakim Nohlgård
6dbc8d7e17 frdm-common: Add OpenOCD configurations for Kinetis L devices 2018-03-02 15:38:39 +01:00
smlng
dab84471f1 boards/remote: use port names in UART config 2018-03-02 09:08:28 +01:00
smlng
d8bb9030ae boards: zolertia remote add uart1 config 2018-03-02 09:02:53 +01:00
Sebastian Meiling
f5ef0bd09c
Merge pull request #8345 from danpetry/cc2538_uart 
cc2538/include/periph_cpu.h: Changed UART configuration format for cc2538.
 2018-03-01 12:02:59 +01:00
Alexandre Abadie
79ab920333 boards/iotlab*: fix driver params usage 2018-02-28 18:26:39 +01:00
Bas Stottelaar
eada4b71df boards/common: silabs: add common board drivers for Silicon Labs devkits. 2018-02-13 21:46:05 +01:00