Log outputs generated by binary ESP32 SDK libraries are mapped to the ESP32's log module which supports colored and tagged log outpus. Tagged log outputs from SDK libraries are handled accordingly.
The implementation of `log_module` for ESP32 was changed from functions to a macro-based implementation to be able to use the bunch of macros for colored and tagget log output generation.
ESP32 log output was always tagged with additional information by default. The tag consists the type of the log message, the system time in ms, and the module or function in which the log message is generated. By introducing module `esp_log_tagged`, these additional information are disabled by default and can be enabled by using module `esp_log_tagged`.
Log module of ESP32 supports colored log outputs when module `esp_log_color` is enabled. The generation of colored log outputs is realized by a extending the bunch of macros with an additional letter indicating the type of log message,
For the implementation of the colored log output, two versions of the bootloader are introduced, one version with colored log output and one version without colors.
If `SPI_CS_UNDEF` is given as the `cs` parameter, CS pin must not be handled by the driver. Furthermore, if `cont` parameter is true, CS pin must not be disabled at the end of one transfer.
Thin archives also cause a boot loop when using the flash module.
To prevent further surprises, disable thin archives unconditionally
until the cause for this behaviour is known.
For a yet unknown reason, both esp8266 and esp32 get stuck in a
reboot loop when thin archives are used.
As a workaround, disable thin archives for now if esp_wifi is used.
fixes#12258
* CPU files should already have 'CPU' defined by the board.
* Do not conditionally define CPU as it is not needed.
This is part of cleanup prior to moving the CPU/CPU_MODEL to
Makefile.features.
Instead of having a send buffer as member `esp_wifi` netdev, a local variable is used now as send buffer. This avoids the need for a locking mechanism and reduces the risk of deadlocks.
Receive call back function `_esp_wifi_rx_cb` is called from WiFi hardware driver with a pointer to a frame buffer that is allocated in the WiFi hardware driver. This frame buffer was freed immediately after copying its content to a single local receive buffer of the `esp_wifi` netdev. The local receive buffer remained occupied until the protocol stack had processed it. Further incoming packets were dropped. However, very often a number of subsequent WiFi frames are received at the same time before the first one is processed completely. Having the single local receive buffer to hold only one received frame, led to a number of lost packets, even at low network load. Therefore, a ringbuffer of rx_buf elements was introduced which doesn't store the frames directly but only references to the frame buffers allocated in WiFi hardware driver. Since there is enough memory to hold several frames, the frames buffers allocated in WiFi hardware driver aren't freed immediatly any longer but are kept until the frame is processed by the protocol stack. This results in a much less loss rate of packets.
Events of different type can be pending at the same time. Therefore it is not possible to use ascending identifiers for the presence of a pending event. Rather, each event type has to be represented by one bit. Thes bits ORed identify all types of pending events. In the esp_wifi_isr function all pending events are then handled in one call. Otherwise, some events might be lost.
