Previously the setting the alarm would overwrite the overflow callback
and vice versa.
Since we can only set one alarm in hardware, always set the alarm to the
closest event of the two.
Move common code into helper functions and extract the commands
that differ between normal and RWWEE page reading / writing.
This cuts down on `#ifdef` use.
The RTC and RTT share the same peripheral, so they can also
share the same code.
This is needed to integrate the Tamper Detection into common
RTC/RTT code.
Since former ESP32 toolchain versions used POSIX threads, module `pthread` was required. The built-in `cxa_ctor_guards` had to be replaced since they used the `pthread_once` function for singleton objects initialization where the parameter `once` was of incompatible type with that provided by RIOT's `pthread` module. The current ESP32 toolchain version no longer uses POSIX threads. The dependency on module `pthread` as well as according C++ hacks can be removed.
We don't need to read-modify-write the CTRLA register to disable
the UART.
The entire CTRLA register is re-written just a few lines below, so
we can just set it to 0 to disable the UART.
There is also no need to reset the UART since we re-write all config
registers in init.
If a timer triggers while the idle thread is running, previously a stack
overflow was triggered. This commit increases the idle threads stack size if
xtimer is used.
- Added missing wait for TX flush
- Grouped access to the same registers of the Ethernet PHY to reduce accesses.
(The compiler won't optimize accesses to `volatile`, as defined in the C
standard.)
- Add missing `volatile` to DMA descriptor, as memory is also accessed by the
DMA without knowledge of the compiler
- Dropped `__attribute__((packed))` from DMA descriptor
- The DMA descriptor fields need to be aligned on word boundries to
properly function
- The compiler can now more efficiently access the fields (safes ~300 B ROM)
- Moved the DMA descriptor struct and the flags to `periph_cpu.h`
- This allows Doxygen documentation being build for it
- Those types and fields are needed for a future PTP implementation
- Renamed DMA descriptor flags
- They now reflect to which field in the DMA descriptor they refer to, so
that confusion is avoided
- Added documentation to the DMA descriptor and the corresponding flags
The Atmel I2C peripheral supports arbitrary I2C frequencies.
Since the `i2c_speed_t` enum just encodes the raw frequency values,
we can just use them in the peripheral definition.
We just have to remove the switch-case block that will generate an error
for values outside of `i2c_speed_t`.
